How to Install LED Headlights 2014 - 2019 Toyota Highlander
Vložit
- čas přidán 23. 07. 2020
- All LEDs will fit Toyota Highlanders 2007 all the way to 2019. Maybe even for newer models. Will confirm
High & low beam: amzn.to/3wOf3pN
amzn.to/3NRGRiK
Fog light (H11): amzn.to/3vySJzu
How to install LED interior lights Highlander
• How to Install Interio...
Replace break Light Bulb
• How to Replace Tail Li...
Contact info trackpalmer876@gmail.com
Disclaimer:
TrackPalmer assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. TrackPalmer recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of TrackPalmer, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not TrackPalmer. Due to factors beyond the control of TrackPalmer, I cannot guarantee against improper use or unauthorized modifications of this information. - Auta a dopravní prostředky
Good job in explaining in detail. Best one so far these light so far.
🫡
I really like your videos, thumps up and keep it going!
Thanks, will do!
TP! Thank you very much for this video! I was able to replace the lights on my 2018 Highlander thanks to you!
Glad it helped
Thanks for letting us fix our own car cause without your help nobody will know
Happy it helped 👍
Great video bro, gonna buy one for my highlander
🫡
Good video, you got a southing voice. Excellent way of explaining the job, the only criticism would be that the music was too loud. Other then that, great job keep it going you got a new subscriber.
Thanks for the tips!
Excellent video thanks for sharing, Its works to me
Happy it helped.. like.. subscribe 👍🙂
Thank you for this video!
You are so welcome!
Very well explained!
Glad it was helpful!🫡
Cool video, am thinking of getting lastfit led lights for my 2017 HL limited, btw you missed blurring your plate in some parts
That is great. Let me know how it goes. I will try fix that plate thang.. Thanks.. Subscribe
Great video thanks for sharing, do you get any heat issue from the drivers of the LEDs, like do they cause any issue with any of the vehicle parts inside the engine bay?
I do not have any heat issue. This particular design prevents overheating. Notice that the ballast is separate from the LED and the LED has a cooking fan. I tested it by touch after hours of driving and it's always cool. Furthermore, LED runs cooler than regular halogen bulbs. Hope that helps. Subscribe 👍
I updated both my low/high beams but noticed some flikering during the daytime. At nighttime both low/high beams works fine without flickering
What brand did you buy?
Note that LED may flicker when it's first switched on and the flickering should stop few seconds after or after it gets a little warm
@@trackpalmer I bought the SEALIGHT brand. I think since my 2019 high beam and DRL use the same bulb that's why. I contacted them and they said they will send me an anti flicker resistor. I dont want anything that will void my warranty so might return them.
@@eampomah have you tried using LED for the low beam and keep the halogen bulb for high beam?
Great video! Clear explanations. May I ask how the lights have held up over the past few years? Thanks
They are still working after over 100,000 miles
@@trackpalmerawesome! Thanks for the reply and great video instructions.
to see how well the LED bulb lights the road in front of the vehicle, compared to the stock halogen bulb, you need to go to a completely dark area with no wall, and show side by side comparison. Do your LED bulbs blind oncoming drivers? Thank you
Low beam doesn't affect incoming drivers.
Trying to figure out whether or not these lights would fit on my 2018 highlander. Amazon says it don’t fit but I see you have used them. Can you please help me with this?
They will fit.. you just need to confirm the type of bulbs.. H11 for lows and 9005 for highs
If the supplier did list your model it will say that it doesn't fit
I'm having trouble confirming the fit of the 9005 LED Sealight bulb for my 2015 Highlander. Amazon says it won't fit. Can you please help me figure it out. Thank you .
9005 is the high beam and will fit. You might be getting that message because they didn't list your make and model car in the compatible list. Let me know how it goes.. subscribe 👍
@@trackpalmer
Thank you for your help. Subscribed
Is it fit to 2015 highlander? I checked out your link in the description but they said this fit 2019 Ford F-150. So I’m kinda misunderstanding.
It does fit. Sometimes sellers do not list all compatible models. The important think to note the the type of bulbs that work with your vehicle. H11 and 9005. I used H11 for my fog light because they are brighter than fog lights. Let me know of it works out
@@trackpalmer what year is it of your highlander?
Mine is 2014
@@trackpalmer so Do you think it is same to mine 2015? And what do you used for Low and high beam? H11also?
@@BongRith68 it's the same for 2015. The low beam and fog light are the same. They have the same connector which is h11. The high beam has a different connector and that is 9005
How does the bulbs affect the auto light switch? Does it require any relay harness for it to work?
It works similar to the factory bulbs. Doesn't require a relay. They work with ballasts which ensure optimum performance. I highly recommend sealight because they are the same size as the factory bulbs
@@trackpalmer sealight from amazon?
@@mikenguyen1151 yes. I provided links in the description. You just need to buy the matching bulbs for your vehicle
Do they fit 2018 highlander? When I check Amazon it says that they don't fit
Yes it does. You can confirm your bulb type in your vehicle.. If they are H11 for low and 9005 for high... These will fit.. Also note that I also used H11 for the fog light because they are brighter then fog LED
I installed led low beam headlight bulb in my 2018 highlander and it creates some problem like fist thing i notice transmission down shifting problem. when it downshift it downshift in 3rd gear.. it hard to explain this. engine rpm stay higher. going 60 mph engine rpm with halogen bulbs stay at 1500. with led bulb installed going 60 mph rpm stay at 2000. why ?
is led bulb messing up ECU ECM PCM ?
It's very unlikely that the the LED would cause those problems. Did you disconnect your battery when installing the LEDs?
@@trackpalmer no i did not disconnect battery.
do i have to disconnect battery before installing led bulbs ?
@@ashishpatel1685 I don't have to. If you did your ECU would have been reset and the ECU would have adjustment based on the how the vehicle is running. The LED is just a list that used 12 volts. It doesn't send signals to the ECU to make adjustments. The worse case scenario is it blowing a fuse. You can reinstall your old bulbs and see the problem is still there for a couple days.
@@trackpalmer I did reinstall halogen h11 bulb and there is no more problem. it drives normal. engine rpm stays 1500 at 60 mph. and downshifting problem that i had its gone after installing halogen bulb. what could be the problem ?
you didn’t have to lower the cutoff beam a little bit?
🫡
Does this kit work for a 2006 Highlander
Your low beam is 9006 and high beam is 9005. use this link. amzn.to/3kkmHSr
Watching in 2024 - thanks a ton.
You're welcome!
Does the installation affect the daytime running lights
It doesn't. The high beam will work as the day time running lights at low voltage so they won't look bright in the day
@@trackpalmer I want you to install rear bumper fog lights on this same car. Do a video of it.
I watched your video showing the installation of the fog light in a Highlander. I removed the three screws from the plastic cover as my hands and arms are larger and it is the first time I have tried to change the fog light bulbs. One thing I had a little trouble with was removing the plug from the old halogen as I could only get one hand in there and I wasn’t sure how the connection release worked. I also forgot for a few minutes about the hard plastic tabs on the foglight housing that make it impossible to put the bulb in ( or remove for that matter ) while the wiring harness is connected. I used an H16 foglight LED and the light is a definite improvement over the 5 year old OEM halogen bulb. I will check in your description for 5he H11 for the lowbeam as I have tried 3 different LED H11 bulbs that wouldn’t fit or allow the dust cap to be put back on. I didn’t notice if you put the dust caps back on.
My model doesn’t have a dust cap. The ones I have in the description is the same design as the OEM. They will fit
I bought same led sealight one but my car flicking day run lights
There are some fake ones on the market. Did you get them from sealight store?
@@trackpalmer yes i did I bought from sealight
I have a 2018 Highlander xle, if I replace my high beams to led, does that change the DRL to led? Also I heard people saying that they have flickering, is that due to changing the high beams to led?
Changing the DRL is up to you. You don't have to. In regards flickering, that depends on the quality of the LED. Ensure the LED you select works with a ballast. The sealight brand I use works well. It's small, quiet and trouble free for over a year now..
Like.. subscribe 👍
@@trackpalmer I want to buy the ones you installed in the video. The bulb that I buy for high beams, is that the bulb for my DRL?
@@trackpalmer The daytime running lights are yellow but I want them to be brighter, or LED but I’m confused when it comes to changing them. I guess I’m trying to figure out if my 18’ highlander uses the same bulb for high beams and DRL
@@bbyboy19 I've never worked on one of those.. just remove the bulb to see if it's yellow. It might be.. but even if it is.. you can change it. You just need to see type type of bulb it is and buy the equivalent LED
@@bbyboy19 From my understanding, the high beams and the DRL's are both 9005 bulbs. I just ordered some tonight after doing research and we will see. Ill update
these wont work for 17-19 highlanders. they have dust cap covers
I think there might be rubber replacement dust cap covers that go over the entire unit rather than housing itself in the slots.
@@zeketrill wut
@@randomrazr i’m just saying if you ever get led’s that are too big, they have aftermarket covers that will fit over the led’s that are too big for the oem covers.
@@zeketrill wouldnt those covers block the fan
@@randomrazr well the purpose of most led fans is to release heat from the unit instead of sucking in any air to cool off the led, so “blocking” the fan isn’t really an issue here. Plus, the rubber would absorb any offset heat. Either way, even if the LED was fan-less, the heat would have to escape somewhere and i’m sure these dust caps are designed to offset any heat distribution from the headlight.
You say this is for a Highlander 2014 thur 2019 and it is not true my 2019 has dust covers and I've learned leds you replaced do not fit because of dust covers.
It does work for 2019. That is why it is important to use this particular LED light because the it has the same design as the original h11 bulb. They are the same size and will fit in the 2019 and even the 2020 model.
Should've shown the difference before installing passenger side lights, hmmmmmm.
🫡