If you give points to plywood furniture with wood, the quality will increase./ Woodworking DIY
Vložit
- čas přidán 31. 07. 2022
- Furniture Leg/Top : Red Oak
Body: MDF white matte
Drawer: PB plywood
▶Business inquiries: rlatjdbf@gmail.com
▶Facebook: / woodworkingno1
▶Instagram: / wood.no1 - Jak na to + styl
Hammer sound videos are always great. I love how even with the more modern tools and materials here, you can still see the attention to detail in the manufacturing.
Also I think there are more screws in this one video than every other hammer sound video combined 🤣
That stapling of the drawer bottom was masterful!
Thank you for watching.👍😊
I love watching these videos, however they're both calming and frustrating at the same time because the quality of the finished product, although it's perfect in every way, the builder has at his disposal all of the amazing and incredibly expensive commercial machinery with which to use. I appreciate it more when the content shows the useage of more home-based woodworking shop equipment.
Many people misunderstand.
I don't have many machines.
The plywood was ordered by paying a price to a neighboring commercial workshop.
My tools are also gifts from friends.
It is also the meaning of a friend telling you to try CZcams.
The tools I have are hand tools.😊
Thanks for clarifying. Your talents are impressive and I enjoy watching your videos.
@@jethropebs maybe there's a shop near you that either rents out tools or their facility.
I agree. We, the normal people, can't relate to these activities because we only have a simple saw to begin with. That's not to say these videos are not good. It's just not relatable.
@@rubentutee he’s showing the whole process, including the edge banding which is being done in a commercial facility. It’s of value to see the entire process, even if he’s not doing every step himself. I don’t build my own car or fabricate my own television, but I appreciate the way it’s done.
망치소리님 영상만 보면 배우는것 많아요 ^^
번창 하세요 ^^
응원해 주셔서 감사합니다^^ 계속 지켜봐 주세요..👍😊
wow! hugely impressive!. amazing! talented. gifted. professional. accurate. precise.
안녕하세요. 올려주시는 영상 정말 감동하며 잘 보고 있습니다. 저는 현재 씽크, 붙박이 등을 만드는 일을 하고 있는데, 다음 달이면 일을 시작한 지 1년이 됩니다. 일을 하다보니 원목을 다루고 싶다는 열망이 생겨, 수강할 수 있는 여러 루트를 알아보고 있으나 여건상 여의치가 않네요. 그래서 틈날 때마다 선생님의 영상을 보며, 많이 배우며 또 감탄하고 있습니다. 적지 않은 나이에 배우기 시작한 일이라 여러 부담과 고민이 있지만 적성에도 맞고 오롯이 집중할 수 있는 시간들이 너무 좋습니다. 선생님의 창의성과 작품들에 존경의 마음 가득하며, 여러가지를 보고 배울 수 있는 기회를 주심에 진심으로 감사드립니다. 언젠가 저도 선생님처럼 좋은 작품들을 만들어 동종업계에 있는 한 사람으로 만나 뵐 수 있는 날이 오기를 기대해 봅니다.
반갑습니다,.
저 또한 싱크를 접한후 원목을 알게 되엇습니다.😉😉
마땅히 배울 곳은 없어 책과 유튜브로 독학했네요..
궁금한건 만들어 보고 실패를 반복하다 보니 이젠 머릿속에 떠오르는 건 왠만하면 다 만들 수 있게 되었네요..
그래도 여전히 배울 것이 많고 만들어볼 것들이 많아요.. 같은 목공 인으로 응원하겠습니다.
👍👍👍👍
Классная работа. Мастер высшего пилотажа! И музыка прям хорошо подобрана
👍😊
nice simple lines there - very attractive and functional.
How to Build Furniture:
Step 1) Put the materials in your automatic cutting machine.
Great as usual. It was very interesting to see the industrial side of cabinet making. I would be interested in seeing more. Maybe a longer, more in depth look at the technology and techniques and the different uses. Again, great video. Very interesting 🍻
Thank you for watching.😊👍
Good work
Buen trabajo 👍
Execelente! Gracias por compartir el contenido, me gusta ver cómo cada persona en especial utiliza algo distinto para sus proyectos, me gustó la escuadra que sujetaba la tapa superior, los tapa tornillos, la base del mueble, es agradable ver el empeño que le ponen. Un saludo!
Молодець, гарно вийшло
Дякую за перегляд.
It’s the perfect balance of white on oak.Also is that your place of work with all those amazing cutting machines
Not all of them are my machine.😊
Very nice 😍
Super nice.
Nice looking furniture, much better than IKEA for sure and with the price of wood here in Arizona plywood works for me! Also, great looking shop my friend!
Yes, it's very beautiful. Probably, I will make such furniture for one of the bedrooms in the house.
👍😉
Обалдеть... Смотрится на одном дыхании.
😊👍
Супер мастер
Молодец!
뒤통수를 제대로 한대 맞은듯 신선하게 잘봤습니다!
저는 현업에서 영상에나온 거의 모든 소재로 상업용 제작가구를 만들고있지만 이런응용은 상당히 신선합니다!
가성비와 가심비 두마리토끼를 다 잡으셨네요~~
자주 시청하겠습니다!
잘봤습니다
좋은 말씀 감사합니다.
이렇게 알아봐 주시니 저에게는 기쁨입니다..
정말 멋져요~^^
감사합니다.😊
Very nice so much 👍
😊
Très beau meuble pour les sous vêtements et chaussettes 👍
C'est exact.🤞😊
Тумба made in LG. Респект.
Very nice work my dude 👍 but that cutting machine is intimidating . I mean all I have is an skill saw ( side winder saw) from 1997 😆 still works pretty good!
👍👍👍
Excelente trabajo,, las maquinas ni se digan,,
La máquina no es mía.😢😢
quiero tener👍👍
20만 축하해요~~^^므찌다~~
😂😂 감사합니다.
👍👍❤❤
🤞🤞👍
spiffy👍
Wait...we can just tape mitered joints together!!! 🤯
красава
😍🙏💕
오우 깰끔 합니다^^
감사합니다😊🤞
짜맟춤 가구만 잘 하시는 줄 알았는데 일반 상업가구도 정말 잘 하시네요
상업 가구는 속도전이죠..👍😊
Just like buying furniture at Ikea, only difference is that this is more work and cost more money 😁😉
👍😒😒
But it’s also custom fit to your needs. A lot of times, that’s worth the price difference alone
Ah all the pro cabinet makers in comment section as usual... the only similarity is maybe a design, maybe. Ikeas 14mm and 15mm panels are garbage, finish on them is even worse. I dont know if we are commenting on a same video (apparently not) but this cabinet is gazillion times better than the most expensive ikea unit you can find.
@@bluewanderer9903 👍👌
@@MrMcTavishOBS 👍👌
I’ve often thought that IKEA furniture could look more high end if it incorporated some real wood accents. Just adding a wooden base like this to something like the $50 kallax storage unit would transform it so much. Thanks for the video!
Adding value to furniture is relatively simple.👍😊
You can also always pick up their all wood lines like the IVAR and customize them for a nice project.
Fast and nice :O)
Dozens of products can be produced per day.😊🤞
개인적인 질문이 하나 있습니다
순간접착제는 어떤걸 쓰시나요? 제가 사용하는건 접착제 함량이 낮은지 금방 안굳고 거의 40초이상 정도가 있어야 굳어서 사포나 칼로 긁을수 있더라구요 진짜 순간적으로 접착하는 접착제이름을 알고 싶습니다
동내 문구점 이나 공구상이 아닌데서 사서 그런지 약하네요ㅜㅜ
전 401을 사용합니다..
혹시 면이 잘 붙은 상태로 사용하셨는지요..
본드 사용에도 요령이 필요합니다.
40초나 걸렸다면 붙이고자하는 곳에 면이 떨어진 상태가 아닐까 생각이 되네요..
만약 사이가 벌려졌다면 소다를 틈에 채워서 사용해보세요..
👍👍👍👍👍👍👍👍👍👍👍👍
А почему планки сразу на кромочном не наклеить? Они вроде как с планками до 4-10 мм работают..
I don't like chipboard furniture! The But if it's for the studio, then fine, why not. A wonderful CZcams channel!
Lol, screwed sides on to spreaders and bottom then capped...no dado for drawer bottom, plus side mount slides not soft close. Cheap furniture.
Everybody should be working with several $20,000 dollar pieces of equipment, right? LMAO
Bel truciolato
😊👍
Did anyone else see any plywood being used? since when is particle/chip board considered to be "plywood"
Came here to say this too
не понял, сначала наклеил кромку ПВХ, затем оторвал и наклеил буковую планку?
Здорово,Да? А еще они похоже не знают, что в кромочный станок можно эти планки вместо кромки вставить)))
Nice work, but not overly fond of the white finish (personally would prefer pure oak).
That is very well done, but what is the purpose of making a looking Ikea furniture ?
Justamente eso, que no parezca un mueble de ikea
Just that, that does not look like an ikea furniture
🤔🤔
I mean : you do an amazing work, and you deserve the best kind of wood 🙂!!! But your video shows us that real wood can improve OSB and other composites, it is ok....
Было бы красивее закрепить бока на фиксы( скрытый крепёж)
👍😁
Дрова
дуже круто. А при чому тут фанера?
Дякую за перегляд.😊😊
이런식의 합쳐서 만드는 것이 가장 합리적인 방법일지도…
그럴지도 모릅니다.. 😊👍
🤝👍🙋♂️🇺🇿
👍😊
Так где фанера? Вариант хороший, а фанеры не видел...
Что то совсем не понятно название видео!? А именно фраза "Если вы дадите баллы фанерной мебели с деревом, качество повысится". Что это значит, какие баллы, качество чего повысится???
Автоматический перевод - бессмысленный и беспощадный 😉
@@VVygolovsky Очень на то похоже... Оставляли бы тогда оригинальное название, а то теперь вообще не отгадать эту шараду...
@@summersnow2408 а оригинальное название вроде бы на китайском, он китаец?
@@vne-seti Южная Корея.
Что за глупый заголовок. О работе мастера речи не идет. Мастер есть мастер.
😦
фанера не дсп. 30 лет прихожке
다리에 Glue 만 붙여서 튼튼한가?
I understand factories use melamine and MDF panels to cut in cost dramatically but to use that beautifully oak and slap "IKEA" box on it was a miss for me. However, I don't judge taste just expressing myself.
Thank you for watching.
Ну да, своими руками, да. Практически на коленке, чё.
I most humbly ask for a video of your kung-fu technique for cutting melamine with out chipping out the bottom on a table saw the doesn't cost 327,050,000.00KWR. 감사합니다
I'm seeing the limitations of Google Translate right now.
I don't understand what you're saying.🤔🤔😂😂
@@망치소리HammerSound he's asking for a video cutting the melamine without damaging it using an affordable table saw
молодец китаец
Кореец.
@@dmxumrrk332 успехов корейцу от всей души русской
@@user-mx5xo8gj7d North Korea?
Просто убил материал
Когда стал кромку отдирать и клеить дубовую рейку, аж глаза закровоточили. Ох и мастер… ещё и куча народу смотрит и думает что это правильно.
😂😂👍
Тоже задело ))
Можно на конферы и стяжки собрать более аккуратно будет. Ножки вопрос спорный в плане чисто на клей.
@@user-er9ye4ve4z не понятно почему с таким оборудованием не сделал присадку для скрытого крепежа. Если только шканты в виде заглушек не являются неким декором.
А что, и это было? Прервал на середине...
Particle board isn’t plywood neither is mdf sheets. Go get it wet. See if you can refinish it. Won’t mention the sag. No points for plywood use.
"Деревообработка своими руками "..с такими станками каждый дурак сможет.
Мебель из фанеры была заказана другой фабрикой.😊
@@망치소리HammerSound а где там фанера? МДФ, ЛДСП и немного массива.
Мебель рівня Ілона Маска🤭
🤦
1. Не увидел там фанеры.
2. Увидел там автоматический станок для резки!
Закрыл видео. Поставил дизлайк. Ушел в гараж резать реальную фанеру лобзиком!
;)
Тогда уж ножовкой с мелким зубом. Лобзик вообще не для прямых резов.
Лобзиком фанеру ? Всё братан я дизлайкаю твой коммент
IKEA is an awful excuse for furniture
Металл и дерево, не совместимы. На таких станках можно делать лучше. Ширпотреб с с претензией на эксклюзив.
Chipboard …..🤣🤣🤣🤣🤣….absolute rubbish !
Not a dream material indeed. But it can be good if it is not a structural part of the furniture. But this... This is all rubbish, he made a low "ikea quality" furniture.
give my points to plywood?
what does that even mean?
definitely not an industry term
It means making points on plywood with solid wood.
@@망치소리HammerSound
Are you talking about the banding that covers the edge of the plywood ?
I think he means accents. He increased the value (of a cheaply built cupboard) by adding wooden features. Can you grasp that?
Вообще никак не смотрится,дёшево и без вкуса а самое глагное,материалы фуфловые.
Да, я тоже в шоке с этой работы, нас бы клиенты прибили за такое.
Сквозные отверстия в МДФ плите с софт тач покрытием это нечто мне непонятное.
И зачем было проеклеивать сначала пластиковую кромку, а потом снимать её и приклеивать шпон? Наверное чтобы адгезия хуже была, нельзя же просто взять и на том же станке вместо пластика приклеить сразу шпон 🤣
Оно смотрится прекрасно ты о чём
такие станки и на коленке \на коленке когда топором\ а эта мебель прослужит от силы год и развалится
ни клея ни соединения в замок тяп-ляп и готово в школе на труде делают прочнее
Колхоз)) переведённый материал, технически , крыша дно зачем видны двойные ? Шканты на лицо (((( но если это не на продажу) то и таак сойдёт 😂✌️🎻🎩🤠
I wouldn't consider it furniture. Looks like one from distance, though.
How charming you are, from a distance..
@@sebastianlt8909 😂😂😂
Particle board crap 🥱🥱🙄🙄👎👎👎👎👎👎
😎