Homemade Exhaust MUFFLER For Lawnmower ?
Vložit
- čas přidán 26. 08. 2024
- INSTAGRAM : / doctords17
FACEBOOK : / david.skrbin.1
If I have helped you and if you liked this creative video sure to subscribe and like the video;) I'd much helped me ...;)
...
Ako sam vam imalo pomogao i ako vam se svidio ovaj kreativni video obavezno se pretplatite i lajkujte video ;) PUNO BIH MI POMOGLI... ;)
It’s louder, blows right in your face, and took half the day to do it,And yet I couldn’t stop watching. The shims on the studs is the best part
You can hardly hear it now! WHAT?? I SAID,, YOU CAN HARDLY HEAR IT NOW!! 😁
I think the fumes from aiming that directly into your breathing path is what is making you put mufflers on stupid shit lmao
What’s wrong with you are you mad you don’t got skills like him
This is like funny af
I love fresh exhaust in my face while I mow. Nice job!
Why would you put the exaust end towards your face?
All fumes goes in your lungs
CZcams has some of the best comedy on the net. Keep up the good work.
how does that hot smelly exhaust feel in your face when you mow?
Ummmm...? Yeah.?. Like is it me,....or is it just as loud as the original? Then what's the point.
I miss the old 2 stroke lawnboy that dumped the exhaust under the cutting deck. Made it a lot quieter too.
Now the mower is: louder, heavier, points right into your face… yikes. Looking for a quieter muffler…
Why would you point the exhaust at the user?
That's NUTS😂 pointed it to your head, now you need ear muffs
And an oxygen musk
All of that to make a muffler this is going to blow exhaust directly into your face. and it doesn't sound any more quiet. what's the purpose?
You do realize a 90 degree elbow has far more restriction than a bend right? There is a reason why exhaust systems use bends not elbows.
why did you point the exhaust right back in your face?
I was going to ask that. I guess he likes fumes.
Did you do all that work just to make it louder?
you have aimed the exhaust right at Your air intake
electrondady1 that’s called EGR bud
😂 Nice
He just made a cheap simpler version of a egr lol
The air intake is actually on the opposite side.
Exhaust bolt fatigue from vibration may become a problem. And it didn't seem much quieter in the video TBH. Could you angle the muffler down and put it through a close fitting hole in the deck?
It is very likely louder having the thing pointed towards your face. A baffle style muffler would have done a better job of muffling the noise.
Now I'm no expert, but isn't the point of a muffler to... idk, MUFFLE the sound coming FROM the engine?
You can make a lawnmower silent by turning it off.
Wow thank you so much for this advice it save my life and give me 10 wife’s
Aiming the exhaust towards your face does not seem like a good time mowing to me
From lawn Mower to Honda Civic
Nice job, but it sounds more loud? Way loader! Was that the goal? Next time? Run two nuts on the exhaust bolts, and drive them together, that's the easiest way to remove the long bolts. Then you can new short bolts for the exhaust
How can I get the last 11 minutes of my life back?
Good thing I skipped to the end😂
Love the idea, but didn't quite work, seemed more noisey, how exhaust right in to your face and water in to the engine if it rained. I also remember doing something similar for my old motorbike using a coke can as a temporary fix, I also added glass wool (rockwool) which helped with the noise.
I would have aimed it forward instead of right at my face.
Now it’s twice as fast😁 because you’re running to get done faster now that it’s blowing right at your face.
😂😂🤷
A small, easy to make improvement. Calculate the area of the opening made by the exhaust valve. Make a plate with an opening 30% smaller. Weld it onto the existing tail pipe. Betcha less noise.
you lose power....
the way to get less noise is to make the airwaste energy before it gets out of the muffler
i was actually expecting it would be much quieter,lol.feel sorry for the nieghbour.
now that's that most painful 10 min of my life,
Points exhaust right at face lmao
It's louder than the original
Now this guy knows how to make an instructional video no talky talky but a lot of worky worky
Ha seen this one coming from a mile away it’s actually louder the noise from small engines are not usually from the exhaust it’s engine noise through the crank case dang kids
Nice idea but it sounds louder than the original muffler.
Bazooka Joe isn't that the point ?
if you roll a tank over the lawnmower, the muffler will survive
so f***ing heavy build, vibration can damage the aluminium cylinder head
if it should be louder don´t use a muffler,
if it should be quiet use a battery powered mower
if you want to poisen yourself use a hose and put it on the exhaust and you mouth
if you want to learn how to weld, ask some experts for help or make an education
if there are any other reasons to build this "thing", I don't get it
I'd rather not have the noise pointed right at my face, but that's just me.
It would be cool if you could make mowers quiet.
Why in the world would you want the exhaust pointing straight back at your face?
please mow your camera and spare us anymore videos
How to make a honda civic
Engineering,design and build all are about a hundred years too late. You know there's nothing wrong with the original right?
So this must be the Manscape Lawnmower 3.0 everyone’s been talking about. Ok. You got me, I’ll get one lulz.
Haha good one man. I straight piped my mower. 👍
I don't care if it's a good idea or not. You created. You invented. You tried.
Why would someone make a muffler pointed up towards there face. All the nuts on the muffler? Guess you were board,nice job fabricating all the parts.
Got all that exhaust fumes blowing right into your face now 😮
Mount some lights on your mower and nite mow,,, oh yeahhhhh👍🏻👍🏻👏🏻👏🏻👏🏻
hahahahaha yeahhh xd
Out of all the metal you could've made a sleeve or something to fit over the bolts for your muffler and tighten the nuts on that instead of using so many nuts. Just a suggestion.
The spray paint to mark holes/outlines is pretty clever.
My question is...... Why would you make a muffler that points directly backwards in your general direction? Being a landscaper for several years grass clippings tend to fly everywhere and this is just giving yourself an eyeball full of grass with this invention!
Best sounding Honda ever.
That's not how a muffler work man, you should've used two pipes. One coming in one side and the other opposite, stop them about an inch from the end of the can, where the pipe would almost be side by side inside. That would help cancel sound. All you did was make a gun silencer for your mower exhaust.
chimp3376 yea I understand about resonance, but what I said will inherently have noise cancelation within the can.
ADD VTEC AND DONE! 😎
Skipped right to the money shot, it sounds the same? Let’s rice the lawn mower mom.
Reminded me of a day I helped my friend change his exhaust on his Honda Civic
Maybe next time you can just hook up a hose and directly suck up the fumes.....
Well, I hope that this mod helped the user but I am thinking not
A grinder and paint make you the welder you ain’t
It's louder and more annoying for yourself and everyone around. Was that what you were going for?
Comments
Why did you position it to blow right toward your head...
I wasted 10 mins for this.
Why not stick it straight up n put flapper thing on top of stack???
Thank you for being creative but... not only does it look stupid with the nut collection but you pointed it right in your face for maximum ear drum blowing and carbon monoxide poisoning. Point it away jesus....
i like it. nice job .nice work shop so how many vices do you have?
....now all it needs is a huge aluminum wing and fake NoS bottle!
@RCmaniac you know...like all rice machines. All show no go!
That would be too fancy he needs a plastic wing painted carbon fiber with a 1mm turbo 🤣😂🤣😂
It's good for the winter time. The exhaust is pointed right to the face to keep warm. This is a low key life hack.
who the hell mows the grass during wintertime :D
RayZor that the point of the joke man. When he's cutting the grass while it's snowing, he can keep warm. But who the hell cut their grass when it's 20-30 degree.....lol
Ok you got the fart cannon on now you need a cold air intake!
He must be a honda guy
Redirecting the carbon to go right up your nostrils. Well done.
I enjoyed your video, i absolutey LOVE over-engineered stuff. Your little silencer looks like it could take a direct nuclear hit and still keep on doing it's job.
Sounds better than a lot of Ricers
i just wasted nearly 10 minutes of my life. Its equally as loud
12 seconds looking at an actual muffler would have produced a 10x better unit.
Just because you can, doesn't mean you should....
Tim Westendorf why?
Good Video on How NOT to do it!!!
Geez dude, get you wire fed mig instead of that stick welder, and why would you point the exhaust up at your face?
he's not trying to weld..he's learning how to make sanmiches!! those beads look like chunky peanut butter and jelly!!\
It’s better not to weld on a magnet as it cause holes in side the weld
I see people next door must just love you
And now you have fumes blowing directly in to your face😏
I don't have enough lifetime to explain what is wrong with this mower now -.-
Terrible design, but your welding skills with that cheap stick welder aren't bad.
Now you can wake up your neighbors early in the morning.
Drill holes in the plate at the end around the small tube. Plug the small tube.
Let the sound go through the glass wool vs end of pipe...it will be much quiter!
the first 46 seconds are the best I laughed hard ..revving the engine .. ha ha bold!
Nice fabricating job there. But way too much expense and labor for an easily obtainable replacement part. If it was noticeably quieter or improved the performance I would have been more impressed. Good video though and a cool idea, just needs a few refinements.
Just gotta have nothing but that carbo dioxide in you lungs the entire time 👍
Ouuuuuu yeahhhhh
You do so many things wrong.......
Sounds just as loud.
Haaaa, that was really cool dude! I put a pod filter air intake on my mower. The exhaust was next. After that perhaps some led strip lighting underneath and I'll have the most pimping mower on the block!
It is a baby pod filter by the way, only about 1-2 inch diameter. Looks awesome!
hahahahaha nicee
The exhaust is direct on your face :)
Keeps bugs away especially if add a little 2 stroke mix oil to the gas(great for upper cylinder lubrication!)
Ahahahaha pure alla macchinetta pe taglia l erba!!! Che grande!
I did laundry last night.
Technically a good work, but I wished to have reduced the noise of the lawn mower, not even increasing it.
was looking for this. looks good apart from the direction and the nuts to secure it perhaps cut the rod shorter and tap it
that was a fun video. Well-paced and visible.
It looks great, but you would be better off pointing it straight up or to the side to keep it our of your face.You should have cut the exhaust bolts down so that you dont have to mount all those nuts.Not insulting it, i love and kinda wanna try it myself,but its constructive criticism.To make it better you should paint it too,that way it looks much cleaner
its going to fall off. add extra brackets
Video starts at 9:10
90° elbow for exhaust!?! Go home, you're drunk
not exactly a performance mod. lol
Perfect way to…uh…do absolutely nothing to make mower quieter.
Would run a little wormer with that 90° angle.
Wait a second why did my dude put 12 nuts on the thing?
Poor man's lock nut?
Most were just oversized fillers to take up space so that the correct sized ones didn't have to be threaded all the way down. They were basically acting as thick washers. Guess he didn't want to cut the bolts in case he wanted to return it to stock exhaust.