I have never used a husky saw but that was doing pretty good the only problem I seen is he was way to careless and was getting way to brave with that saw and i seen it kick a little a couple of times he needs to slow down and be more careful with that thing and have more respect for that heavy duty saw i have a stihl ms461 with 77cc so i have ran those bigger saws so i know what it can do and the danger of its power to cause a accident from careless action when running it
more a 40 centimetres or 16 inch,,,,that nice Husky takes 24 inch no problems.....one of these days i will show the family husky.s and the bars,,just to show
But one thing for shore if you put a 24 inch on that do not deep cut like that you going to cut your foot,,,just working danger operator .to show off you nice machine you do not need that fast running we no the 365 x torq with the changes os that i forgot whats the name of that ,,will turn like power of 372mmmtake it ease MEN,you going to cut yourself .
This saw , Husqvarna 365 X-torq 70.7 cc, 13500 rpm. max ,opening transfer port , standard chain for cutting. Just no more than 365 x-torq.There is no other mod !
hello Krasimir! Are you in Romenia?You are strong in wood! I m at Oporto POrtugal. That bar and chain combination make a powerful fast cutting operation. i buy a very low hours 372 x torq 2014.I want to buy a hurtz 372 mufler for 10 € from ebay and make a dual port with a 16mm drill in second outlet with screnn and a 288 deflector..But i want your opinion: i ask my saw mecanis for a delete at the carburator limiters.Today he say if i do it they ill lose the fixet position and i will kill the corret adjustement at the carburator.And if i try to make the more rich seting for the carburator and adjusted to more open dual port mufler the same carburator will be lose and change lean and a seizure will hapened. Greatings Andre Campos
I haven't touched the carburator. The magic is in the cylinders, the transfer ports are in the cylinders.While on 365xt the ports are closed on your 372xt the ports are opened. I can't give you a proper opinion on your problem because I haven't touched my carburator. And I'm not from Romania, I'm from Bulgaria. Best regards Krasimir Jordnov
thanks brother for your feedback. since i sent you the message i go to arborist site and i see what i have to do in the carburator. the oem husqvarna mecanics have a tool they can open my limiters inrich the mixture and closed at the end to fix. i see how to reajust but in my case i use only a 18" bar and is not necessary to much gas than it come factory only a 1/4 to 1/2 turn to more gas in L seating and a lithe gas in H to have more oil in cilinder. for meet the emissions they put lean mixtures and the plastic cages in crank bearings here kilded earlier than with a 3% ls + oil and a litle more 10% mufler opening and a carburator adjustment they rune cooler 12 Cº and stay better oiled inside. best regards from Portugal. be safe. André Campos
Nice sharp chain, great saw i love my 372xp easily one one the best saws made
.H.ćJJ-2..*9ĆJ
Олимпийские игры по заготовке дров 😂
Just like my Husqvarna 365 xtorq very powerful chainsaw good video.
Егати касапина,просто е върха БРАВО
Благодаря за положителния коментар...!
Just Respect !
To jest pilarka najwyższej klasy gratulacje dla chùsgwarny
Husqvarna super
Bravo maistore
Sthill the best
Chool 50mm 70cc muito torq parabens pelo video,.
Put a 20” bar on it and find some harder wood🤗
Lemnul este verde și se taie ușor
What a tree is it, the willow...
What type of 2 stroke oil are you using?
Husqvarna LS+ or XP? And how much for a liter? 20ml, 25ml, 30ml/L?
Thanks!
ls + 25 - 30 ml liter . it s not a mistake to work and xp . Sometimes i work and oil stihl hp'' red oil''
I use two-step synthetic oil Alpine 2T synthetic, 1: 50!
@@krasimirjordanov5103 rpm max 13500 ?
I have never used a husky saw but that was doing pretty good the only problem I seen is he was way to careless and was getting way to brave with that saw and i seen it kick a little a couple of times he needs to slow down and be more careful with that thing and have more respect for that heavy duty saw i have a stihl ms461 with 77cc so i have ran those bigger saws so i know what it can do and the danger of its power to cause a accident from careless action when running it
This made me nervous to watch. Several near misses from carelessness and disregard for safety. I hope that his luck doesn’t run out.
Базар жок манро
The wood is very soft...it's not reflecting the actual capabilty of the chainsaw :(
Nice chainsaw!
How long is the bar and the chain what brand is(Oregon, Husqvarna, Sthil)?
Only Husqvarna . 38 cm bar.
more a 40 centimetres or 16 inch,,,,that nice Husky takes 24 inch no problems.....one of these days i will show the family husky.s and the bars,,just to show
But one thing for shore if you put a 24 inch on that do not deep cut like that you going to cut your foot,,,just working danger operator .to show off you nice machine you do not need that fast running we no the 365 x torq with the changes os that i forgot whats the name of that ,,will turn like power of 372mmmtake it ease MEN,you going to cut yourself .
👍👍 wow keren 👍
Io usor frate,si pune o lama mai mare pentru ca duce drujba.
That's a beast! What cc is this?
This saw , Husqvarna 365 X-torq 70.7 cc, 13500 rpm. max ,opening transfer port ,
standard chain for cutting. Just no more than 365 x-torq.There is no other mod !
what kind of oil you put in gasoline and how many milliliters?
Hi nebunule ai grija mare cu drujba
Nece ta dugo delat
Kalitee
Bravo
Сумасшедший какой-то)))
ktooo?
ΠΟΛΙ ΓΡΗΓΟΡΑ ΚΟΒΕΙΣ ΡΕ ΦΙΛΕ
Sporo je to jos brze mamlaze ...
Mario !
hello Krasimir!
Are you in Romenia?You are strong in wood!
I m at Oporto POrtugal.
That bar and chain combination make a powerful fast cutting operation.
i buy a very low hours 372 x torq 2014.I want to buy a hurtz 372 mufler for 10 € from ebay and make a dual port with a 16mm drill in second outlet with screnn and a 288 deflector..But i want your opinion:
i ask my saw mecanis for a delete at the carburator limiters.Today he say if i do it they ill lose the fixet position and i will kill the corret adjustement at the carburator.And if i try to make the more rich seting for the carburator and adjusted to more open dual port mufler the same carburator will be lose and change lean and a seizure will hapened.
Greatings
Andre Campos
I haven't touched the carburator. The magic is in the cylinders, the transfer ports are in the cylinders.While on 365xt the ports are closed on your 372xt the ports are opened. I can't give you a proper opinion on your problem because I haven't touched my carburator. And I'm not from Romania, I'm from Bulgaria.
Best regards
Krasimir Jordnov
thanks brother for your feedback.
since i sent you the message i go to arborist site and i see what i have to do in the carburator.
the oem husqvarna mecanics have a tool they can open my limiters inrich the mixture and closed at the end to fix.
i see how to reajust but in my case i use only a 18" bar and is not necessary to much gas than it come factory only a 1/4 to 1/2 turn to more gas in L seating and a lithe gas in H to have more oil in cilinder.
for meet the emissions they put lean mixtures and the plastic cages in crank bearings here kilded earlier than with a 3% ls + oil and a litle more 10% mufler opening and a carburator adjustment they rune cooler 12 Cº and stay better oiled inside.
best regards from Portugal.
be safe.
André Campos
ps.Sorry for may bad understanding for your nacionality.
best regards
Andre Campos
Paii in stilul ăsta , nu are multe zile drujba aia ,365 am si eu
pentru asta e facuta sefule..
Este bună și 262xp
This saw had more than 13500 rpm
You know 13520- 13540 rpm .Do you consider 40 rpm as a difference !
Sweden
Интересно а если этому дяди дать , ну например сухой ясень . Он тоже будет так бегать. А мяхкую породу , и дурак попилит , с такой скоростью.
Vladimir Barbashov тяжелее будет ему )) пила хорошая спору нет. Но манера работы меня улыбнуло)
Husqvarna 365 special daha iyi bundan düzen tutmuyor bu tork modelleri
Drujba are motor mare da sina este mica
Asta constituie un mare avantaj. Oricum rupe drujba și lamă mică este de foarte mare ajutor.
Yikes !!!!
I wish you the best bud but you aren't handling that saw very safely.
Αλμπανια πρες
That bar is way to small. Lol. Looks dumb
Any saw can run a 16” bar in this soft wood.
I didn’t know that Mario ran a chainsaw.
oils sthil hp ultra 50.1 ok es sthil ms 440 50:1 ok
kicsi a vezető de nagyon