NOS is a gateway,...the first step to harder drugs. Next it'll be popup pistons, hotter rods, higher compression, then higher octane, a larger camshaft, and the first thing you know, you're hooked on speed.
And cylinder walls as mirrors and huge carter pressure and then you can hone the cylinder walls 😂😂 drove nos too damn much with a 7.5kg bottle and heater
@@DaciaSandero_1.5DCithan later Engine say so: "Boom Biddy Bye Bye, 👋 i put my Parts in the Air and don't ask why, Boom Biddy Bye Bye, Rock-a-Bye, blown off Boom Biddy Bye Bye." "I throw ma set in the air!, come on, i wave it around like i just don't care, throw ma set in tha air, throw it up!, and wave it around like i just don't care!, throw ma set in the air, throw my hood up!, wave it around like i just don't care, and got come on!, throw ma set in the air, I give it up!, and wave it around like i just don't care.." So it was the hittin' Engine telling Cypress Hill these Lyrics.
Oooooohhhh That's why they put it in in front of the turbo. Was wondering about that, I've always seen it closer to the intake after the throttle body. But I was always building N/A Honda's that didn't really like N0S very much lol.
@@STTP69 It doesn't have any use. It's just something that happens naturally. The same thing happens when you remove the valve from a inflated tire: due to the air flowing out of the tire so fast through that little orifice, it makes that the air gets cooler as it gets out the tire, which is why the tire valve starts freezing after some time when the air escape from the tire. My guess here is that the nozzle is right in the way of the flow of air the turbo is sucking in, and the air is sucked in so fast that the same phenomenon happens due to the nozzle being a very small surface similar to a tire valve.
@@dosh8276the liquid nitrous experiences a drop in pressure and evaporates. This causes the nitrous to absorb lots of heat, thus cooling the nozzle. This is called vapor compression.
@@ReroyChangthey don’t show it much but cleetus McFarland uses CO2 or something like it to keep cooler and spooled faster on mullet and a couple other cars
@@Rick_James I had a buddy that had a 03 Jetta Wolfsburg, and we installed a CO2 sprayer on his intercooler. The gas comes out sub-zero, and makes for a very good cooling booster for the charge air.
@@Rick_James they use co2 for boost control not to spool the turbo, he usually does not need it. he tried the nitrous trick like in this video 1 time at a high altide track cause it would not get on to the 2step fast enough.
@@jasonkay9345you’re better off to just spray water on the intercooler. Water can carry away much more heat. Simpler and cheaper. You can literally unplug your washer line and have it spray the cooler
@@adventuringboysbeatz2945 Suppose you haven't watch the movie called Turbo to understand my point of RGB so you say you RGB everything including your toilet bowl so you can't miss the target while taking a dump 😂😂😂😂
@@Ganja-w5d yeah your right, I don't need a car, I have a jeep. And it don't need a turbo. They don't work correctly on a real vehicles like jeeps. But if I had a skateboard, ??? Boy. I tell ya. I remember this video. Can't figure it out so let's make the turbo larger. 🤪☝️👍👌... no really, it might work. Let's spend worthless money. 🤔👍 This is the best comedy scene yet. 🤪👈. How do you get over the larger turbo lag? You do know there's a turbo lag right? And the larger the turbo, the more lag. That just means it can't keep up. I've got a better idea. . One stick of tnt and its to the moon. Sound good. ? I like it. Let me know if I can be of help. 😁
@@andrewgarcia4631 It can throw off your AF ratio if the there’re any thermal instability in the lines or bottle. Which can lead to catastrophic failures if it’s thrown too lean.
When I put a 103 Garrett on my first 6.0. The only way to spoil it was a lil 75 shot off the line. It works better up by the throttle body. Or you can do it like that and just spray a lil more. Let off the brake and grab the spray at the same time. Priceless
I’ve never seen nos injection be used before the turbo. Seems like a pretty uncommon setup that could cause pooling in the intercooler 😂 Depending on if it’s a wet or dry nos system, usually the injector is placed at the end of the intake system, just before the inlet manifold or multiple injectors for each cylinder port.
Its more for show, like a hood ornament thats somewhat functional. If the turbo was positioned correctly and the nos was fitted way after the intercooler it would actually make use of its potential. Its like spraying an inhaler in front of your face and trying to breath it in.
@@eryczakpl2337 It won't make it spool any faster as it's the exhaust gasses passing through the turbine that spools up the compressor wheel. The compressor wheel would probably spool slower actually compared to normal nitrous injection. Since there would be less nitrous molecules making it into the cylinders, so less cylinder pressure and exhaust pressure for the turbine. I think the only reason to do nos like this is for it to look cool lol.
The turbo will suck it in fine from where it is, and once the turbo pulls it in it’s gotta go through a foot of 4” pipe then past the throttle body and into the intake where it’ll be distributed plenty evenly. Honestly he could have the nozzle protruding out 1/2” in front of the turbine housing and it would still draw every bit of that N2O in under boost.
He's not entirely wrong though. A major manufacturer (saab?) did pre turbo alcohol injection testing and found the vapor to be incredibly damaging to the blades. However, another company did their own testing (devils own injection?) and found the damage could be mitigated by spraying at the center of the assembly. This is my vague recollection at least. I believe it was postulated that the inside of the blade has a lower velocity than the outer edge, making it less susceptible to damage.
Isn't it one of thoose that have a lever to apply tension when closed? Maybe i explained it poorly so i'm sorry if you don't know what i mean. For reference tool boxes have a similar clamp style to keep them shut
Honest question here... now wouldnt the spray hitting the impeller be bad? Why wouldnt you put it on the compressed side after the impeller or does it really not matter? Both would have the cooling effect
Don’t let this distract you from the fact that Hector is going to be running three Honda civics with spoon engines, and on top of that, he just went into Harry’s and bought three t66 turbos with nos, and a motec exhaust system.
the Nos is the door of the car shop. My Acura NSX is still at peak performances with 3.5year and 280k km( most of them spent on a race track 😅) on her back is called full stock
That turbo just snorted some laughing gas. Its a happy turbo now :>
😂🤣😂
roflllllllllll
ROFLMAO!!!!!
Turbo addicted to sniffing nitrous and no wonder it high as a jet turbine 😂😂😂
Hahhaaaaaaaa
NOS is a gateway,...the first step to harder drugs.
Next it'll be popup pistons, hotter rods, higher compression, then higher octane, a larger camshaft, and the first thing you know, you're hooked on speed.
This is a public service announcement to protect people both against whip-its & speeding
both very expensive, very potentially dangerous addictions
And cylinder walls as mirrors and huge carter pressure and then you can hone the cylinder walls 😂😂 drove nos too damn much with a 7.5kg bottle and heater
Wow. Yes!
LoL you guy's are funny I guess we all suffer from serious speed
E 😮r😅🎉😅😅🎉😂
Turbo just snorted it and said "TIGHT, TIGHT,TIGHT"
Proceeds to bash every cars face in
Booyah
Blue yellow pink
😂😂😂
It’s not a turbo lmao
Nah, last time I shot laughing gas into my engine, it started making knock knock jokes...
Who's there?
@@pat93ziger engine bearing
@@DaciaSandero_1.5DCiengine bearing who?
"Engine bearing too much NOS"
@@exsopher long block: engine bearing, kaboom?
engine bearing: yes long block, kaboom
@@DaciaSandero_1.5DCithan later Engine say so:
"Boom Biddy Bye Bye, 👋 i put my Parts in the Air and don't ask why, Boom Biddy Bye Bye, Rock-a-Bye, blown off Boom Biddy Bye Bye."
"I throw ma set in the air!, come on, i wave it around like i just don't care, throw ma set in tha air, throw it up!, and wave it around like i just don't care!, throw ma set in the air, throw my hood up!, wave it around like i just don't care, and got come on!, throw ma set in the air, I give it up!, and wave it around like i just don't care.."
So it was the hittin' Engine telling Cypress Hill these Lyrics.
It‘s called laughing gas because that power never fails to make you smile
Amen to that…
Real talk 💯
Grin when ya' win! :o)
Wouldn’t it be called “smiling gas” then?
Yeah... No, it's because it really makes you laugh lol
Not just cool... it cools too.
Someone knows nothing💀
Oooooohhhh That's why they put it in in front of the turbo. Was wondering about that, I've always seen it closer to the intake after the throttle body.
But I was always building N/A Honda's that didn't really like N0S very much lol.
@@jonbar140mostly for spooling up that large turbo
@@miltonulm5102 I'm not sure I understand how that's going to help at spool up? That's on the other end.
@@user-ve3cc3ck7tyou are the one who knows nothing, nos very much cools the air down by a hell of a lot, u can see the injector freezing over
I can't stand when people say "Nitrous makes everything better" because I have to agree with them, and I don't like agreeing with people.
😂🤣😂… I agree
agree to agree
Here ye here ye I accede‼️
😂
Sounds like small pp complex or something, lol
Love how fast the nozzle gets frosty
What is the purpose of it
@@STTP69 It doesn't have any use. It's just something that happens naturally.
The same thing happens when you remove the valve from a inflated tire: due to the air flowing out of the tire so fast through that little orifice, it makes that the air gets cooler as it gets out the tire, which is why the tire valve starts freezing after some time when the air escape from the tire.
My guess here is that the nozzle is right in the way of the flow of air the turbo is sucking in, and the air is sucked in so fast that the same phenomenon happens due to the nozzle being a very small surface similar to a tire valve.
@@dosh8276the liquid nitrous experiences a drop in pressure and evaporates. This causes the nitrous to absorb lots of heat, thus cooling the nozzle.
This is called vapor compression.
It needs another, aint no way it’s getting enough
The best was when it went unfrosty
Most people get a turbo for their engine, this dude got a engine for his turbo.
It’s actually not a turbo it’s a centrifugal supercharger😎
@@Crypticboss1 aCtUaLLy.. No, it _is_ a turbo..
@@hhasteit’s a procharger
The other name is dee
Volvo used a similar setup to provide instant boost with there turbo cars. It used compressed air to get the turbo upto to speed
I did not know that.. Thats pretty cool
@@ReroyChangthey don’t show it much but cleetus McFarland uses CO2 or something like it to keep cooler and spooled faster on mullet and a couple other cars
@@Rick_James I had a buddy that had a 03 Jetta Wolfsburg, and we installed a CO2 sprayer on his intercooler. The gas comes out sub-zero, and makes for a very good cooling booster for the charge air.
@@Rick_James they use co2 for boost control not to spool the turbo, he usually does not need it. he tried the nitrous trick like in this video 1 time at a high altide track cause it would not get on to the 2step fast enough.
@@jasonkay9345you’re better off to just spray water on the intercooler. Water can carry away much more heat. Simpler and cheaper. You can literally unplug your washer line and have it spray the cooler
That snail looks pissed af 😈
Turbo the snail
Only problem don't see the turbo lighting up with RGB like in the movie Turbo
LMAO!!
@@neddy1287 You have attracted the pc gamers. Now we are here and we will rgb everything 😊 say goodbye to your family
@@adventuringboysbeatz2945 Suppose you haven't watch the movie called Turbo to understand my point of RGB so you say you RGB everything including your toilet bowl so you can't miss the target while taking a dump 😂😂😂😂
The movie "Turbo" in a nutshell
😂🤣😂
So i'm not the only person who saw a snail win an Indy race, cool to know i wasn't tripping
@@LotsOfToubleUsuallySerious🤣🤣🤣
@@LotsOfToubleUsuallySeriouslmao
How to get a turbo up to speed.
Or a MGU-K
スーパーチャージャーはターボと違います。ターボチャージャーはエンジンの排気で作動しますがスーパーチャージャーはエンジンの回転動力またはモーターで回転します。
very hard to get the engine to light off at high altitude.
bro had 5k horsepower in 10 seconds 💀
👍🏻
Cringe
Cringe
just for that edit I had to press thumbs down 🙁
edit: this isn't reddit
Cringe
Man, that's really a small one, you can still see the car behind it.🤣👍
Lol
Any turbo is better than none
Better drive the turbo you don't need a car seems like it by your comment
@@Ganja-w5d yeah your right, I don't need a car, I have a jeep. And it don't need a turbo. They don't work correctly on a real vehicles like jeeps. But if I had a skateboard, ??? Boy. I tell ya.
I remember this video. Can't figure it out so let's make the turbo larger. 🤪☝️👍👌... no really, it might work. Let's spend worthless money. 🤔👍
This is the best comedy scene yet. 🤪👈. How do you get over the larger turbo lag? You do know there's a turbo lag right? And the larger the turbo, the more lag. That just means it can't keep up.
I've got a better idea. . One stick of tnt and its to the moon. Sound good. ? I like it. Let me know if I can be of help. 😁
@@CKILBY-zu7fq ever heard of supercharger
Especially on making engines spool up faster lol bad ass man!!!nitrous injection!!
Не азота ,а закись азота( веселящий газ),а азот 80% в воздухе,все остальное кислород и др газы.
Didn't know you could inject it like that. Nice
It’s not recommended
@@Stopinvadingmyhardware never seen it sprayed like this .. why is it not recommended? Educate me
@@andrewgarcia4631 It can throw off your AF ratio if the there’re any thermal instability in the lines or bottle. Which can lead to catastrophic failures if it’s thrown too lean.
@@Stopinvadingmyhardware what is the ''normal'' way of using nitros in general?
@@NikosPer Are you serious? Go away
That whistle!
💪🏻
Holy moly hot mamma macaroni and WOWZA!!!!!
😂🤣😂
It’s really slurping up that delicious nitrous oxide 😋
Yes.. yes it is… 👍🏻👍🏻
Bro just snorted the fattest line and thought we wouldn’t notice😂
🤣😂🤣
My old azz had to look for about five seconds figuring out what I was looking at 😂. I’m lost but like it 😂
Never actually seen it in action before, thanks for the vid
👍🏻👍🏻👍🏻
When I put a 103 Garrett on my first 6.0. The only way to spoil it was a lil 75 shot off the line. It works better up by the throttle body. Or you can do it like that and just spray a lil more. Let off the brake and grab the spray at the same time. Priceless
Engine was about to throw a bearing 😂
That's just the 2-step
Or a piston
You say 2 step he thinks its a dance @mrctuned2844
car snorting nos like cocaine
😂🤣😂
That’s cool to see, I’ve never actually knew how nos hit
I’ve never seen nos injection be used before the turbo. Seems like a pretty uncommon setup that could cause pooling in the intercooler 😂
Depending on if it’s a wet or dry nos system, usually the injector is placed at the end of the intake system, just before the inlet manifold or multiple injectors for each cylinder port.
Its more for show, like a hood ornament thats somewhat functional.
If the turbo was positioned correctly and the nos was fitted way after the intercooler it would actually make use of its potential. Its like spraying an inhaler in front of your face and trying to breath it in.
Clearly never played need for speed lol😂
It's one way to use nitrous, most of the time it gets more direct infection into the engine, this one typically helps the turbo spool quicker
@@eryczakpl2337 It won't make it spool any faster as it's the exhaust gasses passing through the turbine that spools up the compressor wheel.
The compressor wheel would probably spool slower actually compared to normal nitrous injection. Since there would be less nitrous molecules making it into the cylinders, so less cylinder pressure and exhaust pressure for the turbine. I think the only reason to do nos like this is for it to look cool lol.
Freezing, then rapidly cooling from all the air flow. *Chef kiss*
notice how its aimed at the bottom portion of the intake helping the blades to spin faster
👍🏻
Such a beautiful sound
👍🏻👍🏻👍🏻
My old car had nitrous....
And so did I....
One for the engine... one for me! LoL
🤣😂🤣
That's fkn funny
You're a true inspiration.
V8 + Turbo + Nitrous, this engine could fly a WWII Airplane
If Scarface’s nose and a Dyson vacuum cleaner had a baby addicted to speed…..
I would put the injector all the way to the center for better results, just saying.
The turbo will suck it in fine from where it is, and once the turbo pulls it in it’s gotta go through a foot of 4” pipe then past the throttle body and into the intake where it’ll be distributed plenty evenly. Honestly he could have the nozzle protruding out 1/2” in front of the turbine housing and it would still draw every bit of that N2O in under boost.
He's not entirely wrong though. A major manufacturer (saab?) did pre turbo alcohol injection testing and found the vapor to be incredibly damaging to the blades.
However, another company did their own testing (devils own injection?) and found the damage could be mitigated by spraying at the center of the assembly.
This is my vague recollection at least. I believe it was postulated that the inside of the blade has a lower velocity than the outer edge, making it less susceptible to damage.
now thats a monster🔥
👍🏻👍🏻👍🏻
So NOS is like coco but for cars
Pretty much 👃 ❄️ 🤧
Ssssssyyyyyyyeèeeaaaahahhhhhahahaha 🤯
Forbidden combo in drag racing. And nice bigg ass turbo u got there 🎉
👍🏻👍🏻👍🏻
The sound, so distinctive.
Indeed
That engines heart about to give out like he just did a line and downed a redbull.
🤣😂🤣
best video on the internet
👍🏻👍🏻💪🏻
The blocks shaking withdrawls “I wantttttt moreeeee giveeee ittt tooo mee I want moreeee”
🤣😂🤣
Sounds like my Windows 10
😂
Like the disc drive lol 😂
This is so relatable, I love it.
The idle of that cam deserves a Grammy award.
👍🏻👍🏻👍🏻
burblblblblOOOOOOOWEEEEEEEEIIIIIIIII -the engine
Looks like that v-band going to the intake manifold is rotating
That's a good eye
i didnt notice too before i read your comment, really a good eye
it's not a v-band. it is a kind of flexible clamp
Isn't it one of thoose that have a lever to apply tension when closed? Maybe i explained it poorly so i'm sorry if you don't know what i mean. For reference tool boxes have a similar clamp style to keep them shut
It's a type of coupler
Lol point is, apparently he needs a plan b because it isn't cutting it
It's like cocaine for cars 😂
😂😂🤣
I swear v8s love nitrous,make me so excited hahaha
Nitrous for a v-8 is like catnip for a cat.. makes them crazy..
Why would cylinder count matter? It’s a fixed percentage increase on any I.C.E.
Wow this is fire , that turbo sounds so cool too
Still not popular these days to spool one with laughing gas because of class restrictions on double power adders but its SO damn cool. 👌
👍🏻👍🏻👍🏻
Gotta love how the rotor gets a tiny bit smaller from the cold
Do you?
@@_..-.._..-.._ Don't we all?
Great way to pop the intake off when your turbo timer craps out :)
Turbo timer?? 😂🤣😂
Probably meant the VGT Actuator, seen on Variable Geometry Turbochargers, dont think this is a VGT setup.
Kids think they know everything; unless he’s making a Fast & the Furious manifold danger joke, then it’s okay 😂
Imagine putting your finger in there 💀😭
Damn!!! That would be bad…. Really bad… 🤣
@@ReroyChang I bet lol 🤣
You first, me next 😂🤣😂
@@enjiegrows8531 HELL NAH 💀
This is so chill.
Literally 👍🏻
Watching the tip of the injector unfreeze is sooo satisfying.😮💨😮💨
Go baby go❤
👍🏻
Do they sell water sprays too? Or ethanol?
You can try and piss on it as it runs XD
Water/meth, yes
How much. Yes
Especially when it kicks in.....😊
That's the fastest way to blow up your engine 😂
😂🤣😂.. you think so
When spraying nos your going to blow up any engine lol
@@ifuaintfirsturlast7551 exactly
Usually only the charge pipe pops off
Bro Kraig facts is hilarious “it’s a smother”😂
Whenever nitrous is being shot I always say *he's drinking some red bull*
😂🤣😂
👨🏽🔧: “how much power are you looking to make?”
Dude: “yes, very good”
This is the coolest angle I've ever seen 😲🙌
👍🏻👍🏻👍🏻
Bewtiful a real piece of art right there
👍🏻👍🏻👍🏻
That’s a happy turbo!
Honest question here... now wouldnt the spray hitting the impeller be bad? Why wouldnt you put it on the compressed side after the impeller or does it really not matter? Both would have the cooling effect
Never knew how it worked! Thank you for this! So damn cool!
That turbo got a good sniff of crack💀
🤣
that was really cool to watch 😀
thx !
👍🏻👍🏻👍🏻
If only this was the real original Batmobile from the movie with Michael Keaton
The Turbo just did a Scarface line and you cannot tell me different 😭
🤣😂🤣
That's one hell of a happy turbo!
NOS is the whip-it’s of the car world.
🤣😂🤣
Dam that’s an awesome shot of it in action normally you see a purge or if it’s running you can’t see the action.
Nitrous on 3 motorcycles, four cars, and one truck. Soon to be 4 motorcycles...
👍🏻
See the vibes, vid Stopped just short of the 🤯🔥☠️💃
Don’t let this distract you from the fact that Hector is going to be running three Honda civics with spoon engines, and on top of that, he just went into Harry’s and bought three t66 turbos with nos, and a motec exhaust system.
Directly into the turbo? Wow. I didn't know they did it like that.
That is not nitro, that is liquid nitrogen (they are not the same thing)
its to make the turbo spool up faster
This deserves a sub 🙏🙏
This is the coolest thing I've ever seen
I tried that in the 1990s with a Vortech supercharger and a NOS dry kit on a Fox 5.0.
👍🏻👍🏻👍🏻
When everything is in harmony it always turns out right!!!
"TIGH, TIGHT TIGHT" turbo from breaking bad 💀
Surprised the camera didn’t get sucked in the turbo 😂💪🏽🔥💯that’s some real nifty power right there on HOOD !!
🤣😂🤣
Nothing like a bottle-lit big turbo
Amen to that.. 👍🏻
As cleetus called it on last years Rocky Mountain race week “spool aid”
So much power it made that clamp move!!!!
Nos is a gateway
Yup
laughing gas made me happy through the screen
I love watching the white fade from the tip
Bro is racing time itself
🤣😂🤣
Nice coldintake air temp too!😮
the Nos is the door of the car shop.
My Acura NSX is still at peak performances with 3.5year and 280k km( most of them spent on a race track 😅) on her back is called full stock
car is like ohhh shit gimme 1 more hit yea give it give it..... ohhhhhhhhhhhh YEEEEEEEEEEEEEEEEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
🤣😂🤣
When the turbo doesn't want to spool. Force it.
Amen to that
It looked like a quick shot to help spool - and not necessarily a stage.
Yup that’s exactly what it is.. 👍🏻
Thats the perfect analogy. Nos is the drug and the engine is the brain 🧠
“Nitrous makes engines last two days”
Yeah, removal of the TURBO I LAG is huge.😏👌.