Sub 100g Betafpv Pavo Pico over water, chasing speedboat and yacht Cates Park North Vancouver
Vložit
- čas přidán 10. 09. 2024
- Flying at a busy beach or park is not an easy task. Even a 2 inch drone could be intimidating because of the high pitch noise while the 3 inch or even 5 inch ones are definitely a no-no.
This is a test of discreetness and as well as the ability of flying at a semi-open sea environment for the Betafpv Pavo Pico. The sun sits farily low yet it was still intense, the DJI O3 is very sensitive to direct sunlight so ND filter is needed.
The location is Cates park in North Vancouver. This is one of my favorite spots in town with a good variety of sceneries to capture.
Please support my channel and use the link below to get your Pavo Pico or Pavo20:
bit.ly/3Udk2dj
bit.ly/40OiY0J
Color Grading with Dehancer
Go to www.dehancer.com for those who are interested to try the plugin for free. In case you want to purchase a license, use my promo code "FLYPUD" to get a 10% discount. Happy editing!
Find me on:
fb, yt: Flying Pudding
ig: Flying.Pudding
Mine is "Out for delivery". I can't wait! Nice calm flight. Thank you.❤
Thanks for watching and happy builidng and flying!
Nice !! I love mine too !! Nice little ripper !! It will surprise you for a 2s !!
Thanks for watching! I am glad you enjoyed yours, happy flying!
Beautiful place!Thanks
ご清覧ありがとうございました
😮nice flying
Thanks for watching!
hey! at what voltage do you land at? i am afraid to push mine over 2 minutes. i have the mobula 8 analog and at times run it till about 3.4 volts. i now have the DJI o3 on there.
Thanks for watching! I usually land at 3.5v per cell for HV lipos. Using bi-blade props and practice good throttle management, it is possible to have a 3 minute flight with 3.5v per cell left. This is for the Pavo Pico though and I am not sure about the M8.
Nicely done ✌️
Thank you very much for watching!
❤🎉
Thanks for watching!
How long did it take to get yours shipped ?
About 2 weeks if I recall correctly
Any gyroflow processing? Stabilization looks great 👍🏼 Was there any mods done to stabilise the O3 camera from the Pico stock frame?
Thank you for watching! You may refer to my build/tune video here czcams.com/video/bNtRDmL98XA/video.html
Very cool!!
Thank you very much for watching!
Nice job 👍
Thanks for watching!
Nice flying, I am planning a trip to Canada next month too!
Thanks for watching!
Welcome and are you bringing your quad too?
@@flyingpudding Sure, I definitely will bring with my Pavo Pico too…
I’m thinking of getting it but I’m scared that the wind would be too strong in occasions like these. What do you think?
Thank you very much for watching! Despite its size and weight, it can handle more wind than you think. I shot a video at a windy beach and will post for your reference, stay tuned!😊
❤❤❤
Thanks for watching!
Are you flying 2s 450mAh? Nice vid 😍
Thanks for watching!
Yes, tattu 2s 450mah 95C
I also use Coddar 2s 500mah and they are 2g heavier than the prior
Should I get it I have the avata
I think everyone should! 😁
Nice smooth flying! Can you share what PID profile you using & rates you using?
Thanks for watching!
This quad uses the default betaflight 4.4 pid and rate for outdoor flying.
I might set up mine wrong mine wont fly that smoothly mine throttle us 0% or 45% is not smooth
@@ileonelite787coc2 are you using the same flight controller and motors as my build?
czcams.com/video/X-1k9NEGrs4/video.html
czcams.com/video/bNtRDmL98XA/video.html
👋👋👋👍
Thanks for watching!
좋아요를 안누를수가 없잖아
Thanks for watching!
I assume that you meant "I liked your video"