Follow up review on our Ariens Deluxe 24’’
Vložit
- čas přidán 26. 12. 2020
- Follow up review on our Ariens Deluxe 24’’. I did a review last year when we first got this snowblower and decided I should do a follow up for everyone.
#snowblowerreview #ariens @AriensChannel
Saburrtooth tools here
www.saburrtooth.com/
Use code HALL10 and get 10% to DEC 31,2020
⬇️Get Some Merch ⬇️
Teespring
teespring.com/stores/kyle-hal...
⬇️ Show your support here ⬇️
💥 Purchase my work here 💥
The Store
etsy.me/2maxH5o
🔥Amazon links🔥
TOOLS
RZ dust mask amzn.to/3qG6RAm
Die grinder dewalt amzn.to/33f1s9I
Saburrtooth 1/2 flame burr fine grit amzn.to/33jkmvS
Saburrtooth 1/4 shaft 1/2 sphere amzn.to/2JtuwDp
Jawhorse amzn.to/32TDGhS
Angle grinder amzn.to/2Gxw7WS
Saburrtooth 4” coarse disc amzn.to/353zhfc
Arbortech mini carver amzn.to/2VIek3E
2” donut wheel course amzn.to/3lKcD03
Turbo torch amzn.to/2EMsTy4
Dremel 4300 kit amzn.to/2GFNepY
Saburrtooth taper 1/8shaft 1/4 coarse amzn.to/34L5Rk3
Paasche air brush amzn.to/3di0BZ1
Drill amzn.to/3mOvSqs
Flap sander amzn.to/36H8Tbp
VIDEO GEAR
Go Pro hero 7 black amzn.to/39NAARI
iPad Pro (similar) amzn.to/36GvC7n
⬇️Follow me on social media .⬇️
Facebook: / hallsstickfurnitureand...
Instagram pBx2tF7wAG...
Pinterest: pin.it/hefrbwprarawus
Check out my Website
www.hallsstickfurniture.com/
Email
Halls.rusticcreations@yahoo.com
free music from CZcams
This channel is intended to encourage, entertain and help advance your artistic abilities. Go and create some cool stuff !
Disclaimer- Do not solely rely on the safety, techniques and information I share / display in this channel. Make sure to do your own research and take proper safety cautions at all times . Working with tools and heavy items can be dangerous !
Your safety is in YOUR hands !
Due to the tools used and topics of these videos this content is intended for users 18+ of age .
Disclaimer: This video and description contain affiliate links, this means that if you click one of the links and make a purchase , I will receive a small commission . This will help support and grow my channel
I know I did and said primed it 10x times ... Only prime the machine 3x it should fire right up .
I used to prime it 10 times and flooded it (same machine). 3-5 pumps is the max now.
Yep I was going to say the same thing...2 to 3 times should be good
If you have never used a snowblower before, you will not fully appreciate the odd satisfaction this video gives.
Maybe not so odd afterall
This is the most thorough as far as getting it running and in addition to showing how this Beast performs in some serious depth and I like the way you demonstrated for those that are novices and snow blowing how you would tackle very deep snow like at the end of the driveway I myself am not a novice in snow blowing but it was good that you showed that for those that are. I lived in a condo for 28 years with my wife we now have a house so now the snow is up to me and his babies a beast and I plan on purchasing it. I grew up as a teenager that would be 1976 that was when we had big time snow now we're having the same thing many years later but the snow blower that I grew up with was an Ariens seven horsepower one stage with the second wheel that you locked in for two stage it jumped through snow like you were doing it earned me a lot of money.
That's a nice small sized snowblower. I have a 31-year-old Canadian Atlas 28" model with a 318 cc engine that is a real workhorse. It weighs right at 300 pounds and can toss me around like a rag doll when it hits a frozen berm. It's fun to launch snow 50 ft out into the trees. It's built like farm implement.
Thanks for the review! I just bought this exact unit. Went back-n-forth with Deluxe 24 and the Honda HSS724. I liked the larger motor and half the price of the Honda.
Smart move. Congrats
You have the drive speed way to fast for that amount of snow.
My old, 15 year old, Craftsman 24" still works great. Twice during summer, I run it up and down my 250' driveway to keep every thing working smoothly. Good for belts, tires and engine. I pulled the wheels when new to lube the Shafter no problems in future . Also added grease to gearbox this year. Unless the slush , wet snow is over 3" all blows out chute really good. I do my neighbors and the street in front of mailboxes. Old like me but not stopping fir anything! Always better to take a cruise then a trip.
Thanks for the comment William !
Just bought the 24 --- this video clarified how to get started --- works well and well satisfied
Awesome. I know I primed it a bunch of time but you really only need to prime it 3x and it should fire right up .
I bought one about 6 years ago one of the best machines you can buy for the money I had a 5hp Craftsman 24 inch that I bought in the mid 90s It was also a good machine that I gave to my son but as for sheet metal gauge the Craftsman was light as for the Ariens it's heavy gauge and just an all around solid machine
Man, if I got that much snow that would be a great machine!!
I'm in Southeast Michigan so we get at most 9-10 at a time. So I went with the Ariens pro 21 single stage.
Buying an Ariens deluxe 24 inch real soon. Looks like yours works very well. I’ve used, and worked on, a lot of blowers. Your video tells the story for me. My 24 inch 2006 Simplicity finally gave out. Just like a house furnace as they never break down in the summer if ya catch my drift.
I just got one yesterday, Ariens 24inch model 920029. Same thing happened to my 21 inch craftsman which I had for over 20 years, the gears starting crunching and would only turn the auger very slowly. Repairs would have cost over 400 dollars, so for 1,000 decided to get a new one. Used it only a bit yesterday, waiting for next big storm. Watched your original video and this follow-up, I think I made the right decision. Great job. Thank you
Thank you for watching Tom and thank you for the comment!
Just bought a new Ariens Compact Rapidtrak, and I love it so far.
8:42 to 9:30 gave me chills lol. Looks powerful!
I just bought this exact machine.This video and others and reviews sold me.Thanks for that max snow demonstration.This bad boy has a nice appetite for snow as I do for how much food I can eat compared to my 165 lb. 6'2" self.I have blown people I know mindsThey say how can a stomach of your size intake so much like that snowblower.😅
Can't go wrong with an Ariens 🇺🇸💪
I am looking to buy an ariens deluxe 28". Got rid of my old simplicity I've had forever & was going to get another one until the dealer here in NH told me Simplicity is ending production so have to switch to another brand. Thanks for the video, you've helped me make up my mind after researching some different models.
Nice review follow-up (I watched the 1st video too.) I just bought the same model Ariens, this will be my 3rd sno-blower in 16 years, and altho the other 2 are still going strong, I wanted a new toy. I live up in the Rockies (+10,000 feet) where we can get over 200" of snow over a winter--- I think my choice in selecting the Ariens was good--- but you know what ? we have had no snow-blower worthy snow yet this winter ! So so far I have had to content myself doing a few dry runs on bare ground to get the feel of the machine. It feels kind'a strange to be actually looking forward to a good storm to test it out....lol
ariens has always been a great machine sold mine we have tractor with 12 ft blade have large area to do
Nice video and review. We rarely get that amount of snow, but I added drift cutters to my Ariens for the rare big snow.
Thanks for the comment. I really need to look into those drift cutters .
Great video! Those LCT engines are awesome. I have the 306 CC beast too!
Thanks Al ! Thanks for the comment!
That's a serious amount of snow, you and the machine did a great job dealing with it.
Thank you
I got the delux 30 with the 15ft of torque and i absalutely love it, it puts all my neihbors snowblowers to shame
Thank you! Good video! I'll purchase this modele. I come from Quebec city, Canada. We have a lot of snow here too. My parents had a Ariens too. A lot of souvenirs :-)
Just bought one, still on the pallet in the truck lol. Did a lot of research and that combined with the unavailability of a lot of machines this year I had the same thought as you, the 24 inch with 14 inch auger is better than a wider cut with most machines having 12 inch augers, plus steel everything as well as a better gearbox sold me. If I had seen your video beforehand, I wouldn't have looked at some of the other machines. Looking forward to using it.
Awesome! I hope it runs good for you . I need to pull mine out and change the oil and do a quick service for this coming season
I would suggest getting drift cutters. They make a big difference in deep snow.
I have a 2014 Compact 24", looks brand new, it's older & has a smaller displacement at 208cc, but it trucks through everything, mark my words, you cannot go wrong with an Ariens.💯
It's surging because the choke is fully opened, set it halfway & see if it stops, even with a freshly cleaned carb mine would surge while fully opened, half choke seems fix that, let me know how it goes for you, if not it's definitely a dirty carb.
@@Void_777If your engine is surging, have to run the choke half on, you've got a boogered up carburetor.
Your machine should run without the choke being half on, with the choke being half on, put the engine under heavy load, removing heavy snow, it won't run right.
Before you store it, turn the gas off, using the gas off knob. Let the machine running until it's quit running, it'll run the gas out of the carburetor.
Now you're ready to store it for the summer.
If you have to turn your choke half on to keep the engine from surging, you have a dirty carburetor!
I love her she enjoys work
Winnipeg mb last year she ate straight through it zero problems.
I highly recommend spending more for tracks bur that's obvious.
OMG your so so lucky to have so much snow I cant believe how deep it is bud...great bit of kit for clearing it.
This machine works great . Believe it or not that was last week and almost all the snow is gone ! We had a 45 degree day and two days of rain and it’s almost all melted
Smaller auger I thought was not as good when I need 24" snow removal but thanks for the lower wet snow removal tip.
Nice video, I have the same machine. Got it last year and the winter was a great test for it. I was very impressed with the performance as well and it’s a nice machine to use. I’m planning on getting mine out soon and firing it up/getting it ready for the winter.
Awesome. I gotta mine out soon as well and get it ready
Are you still happy with your machine? How has it held up?
My strategy, too - small bite, bigger engine. Great vid, seeing it in heavy-snow action...
I have the same, 10 years old now. Only issues I have had are the light went out, easy replacement. And the tension spring shattered. They have a new oem spring I easily replaced that myself. Next up I will replace the 3 belts and gear box oil, regrease maybe. Regular oil is annual of course. Throws snow well enough. You do have to take your time to not overload it.
Thanks for the comment Scott
Hi Mr. Hall. Nice machine & video. Thank you for making & posting it. tonyd\.
Thank you for watching Tony !
Way better than any asmr vid
Honestly it's wicked that it starts on the first pull. But I have a 30 year old snopower that still starts on the first pull lol
I woulda went plat 24, 351 cc. I actually repowered an Ariens 8526 with the plat 24 motor. Moves crazy ass snow
Thanks! We will be looking at the Platinum 24 SHO blower this week to replace our 20 year old Toro 824.
You don't need a platinum. Lol. Just get the SHO model and add handle grip warmers.
@@WheresWaldo05 We did get the Platinum SHO 24, Wonderfull.
Send some of that snow to Chicago, so I can finally use my Ariens snowblower...it's been used once in two winters.
We seem to get at least one storm that can be 1-2 ft but then usually we only get a few inches here and there .
Sounds like your idle jets are plugging up. Thats why it surges when not under load. This is likely because you’re not running ethanol free fuel. The ethanol reacts with the metals in the carb and gunks up the jets. See if you can find ethanol free fuel or use the treatment to avoid the issue. Btw I love the 24” deluxe. Great motor to width balance. It’ll cut through anything.
Thanks Dennis I have since done a carb clean video . Two actually. Working on editing the second where I end up cleaning the jets . Runs much better . Thank you for the comment !
Consider drift cutters, much nicer than having to use a shovel to beat down higher banks of snow or have to run over it again as it piled down behind the auger housing.
I just got the last one at Lowe’s!! 💫💫
Sitting here binge watching snow blower videos waiting for mine to get here in 4 days 🙃
How do you find the snowblower when you are blowing in a straight line. I have seen reviews that said the snowblower always pulled to one side when blowing the deeper snow. He said it was due to their steering mechanism?
The Ariens certainly did an fantastic job in your video. How did it do on fuel, where i live I can no longer get ethanol free gas which is a problem for small engines.
I am deciding between a Honda, Ariens or Toro.
Just subscribed, hope to see third review. Just got the 24” compact with the fast track, won’t cold start with the pull rope, electric starter does the job right up, hope they can solve it before our big snow this season.
Thanks for the sub ! My cold starts ok . I just had to clean the carb though . Currently editing a video on how I did it so everyone else can learn also , if needed
use only fuel with stabil, your carb is probably gunked up
@@johnames6430 yeah stabil is in it, but it was brand new, they gave me a full tank, seems that this summer when I ran it for a few minutes since I don’t like any engine to sit. It starts right up, maybe tainted fuel on that first tank, I buy quality fuel and always make sure no ethanol in it. Unless it just don’t like the cold.
Mine primes off 5. I run it on alkylate only. It's not as costly as you might think. If you do the math and use her daily you can get away with pump gas. I don't mind throwing a bit of money away to guarantee no problems.
You put the engine on full choke when you started it, and then when the engine started to miss and RPMs slowed down slightly, you didn't open the choke. Did you do this whole job with the choke still in the fully closed position?
The style of homes , reminds me of Cleveland Ohio .
Getting my this week maybe next week twenty four sold me on it
I like to keep mine in the garage
I was thinking your next door neighbors home was huge. Then I realized!
I have had several blowers over the years. Yamahas, Ariens, Simplicity, Honda. In hindsight, my Deluxe 24 was the most fun, dependable, rockingest blower ever. Go figure…
Nice review and great machine. I would highly recommend using a lower gear setting for deep snow. If your wheels start spinning, then you're in too high a gear and you may snap a shear pin.
It
Literally only works on the lowest speed. Otherwise the motor dies
Also know when to shut the choke off or you'll.end up fouling plugs alot quicker.
How well does the ariens deluxe do with heavy wet snow? Or dealing with the berm that the city plow leaves at the end of driveway?
I think it dose well . Still have to go slow and take your time depending what n how heavy the snow is
Been looking to get a snowblower. Seems to be mixed experiences with Ariens auto turn. Have you had any issues with it?
I really haven’t had any issues with it .
Were you using reverse or pulling it back? Loved the review. Will be buying one this year.
Reverse why work harder lol . Can easily pull it back back though
2 things, I just bought my second Ariens, the Deluxe 24, used once, awesome job. I live in Canada, but Made in the USA was a major reason for buying both my Ariens. In the video before the big job started I noticed that we never saw you turn off the choke? Did you do the whole job with the choke on?
I did in this video as the machine was running better like that at the time .
I hate snow but looking to buy a new snowblower
Such an amazing video. Are you able to start it back with the push button after running?
Thank you . No the button will not restart it has to be plugged in with a lead cord
Did you notice it kind of skips under real heavy load? I’d check the plugs to see if their fouled. Or start using gas with zero ethanol.
Actually it was performing better under a load . Seemed like it was skipping more when idle
Nice job. Is it me or does it sound like it's surging on idle? Under stress it sounds great, lot's of power.
A lot of the Chinese knock off engines like this one do that. I’m not sure why.
Where is this?😊
How difficult is it to turn around and the end of the driveway? I had a 826 Toro 2 stage last year that I sold because it was just too hard to handle. It had triggers to aid in turning but was just so heavy and hard to maneuver even on the slowest speed. I just wonder if this Airens 24" might be easier.
I don’t really have an issue with it .
I've watched a few of your videos and I saw your Ariens video months ago from last year and I watched this one. Unless I missed it, where about do you live? My guess is the East where lots of snow hit? I live in Milwaukee, Wisconsin and still waiting for snow so I can use my Ariens Compact snowblower. The storms hitting the East have missed Milwaukee and no more than a dusting of snow for December, which is below the average December snowfall.
I enjoyed watching you play with your Ariens. It is rare Milwaukee gets as much snow as your area, but at times we get 8 to 10 inches snow storms at times.
Thanks,
Don from Milwaukee
Hey Don thanks for watching! I’m editing another video using this machine to make a sled track for the kids beats shoveling the whole thing . I’m located 2hrs east of Syracuse NY . Most of this snow melted earlier in the week we had a 45 degree day and some rain .
@@KyleHallwoodworker , thanks, I kind of figured you were in upper New York. Last week Wednesday, Milwaukee had a 57 degree day, and next day Christmas Eve day, it was 14 degrees with below 0 windchill, but no snow which I am waiting for.
That’s kinda how the weather was here for Christmas.
@@KyleHallwoodworker I live 4 hrs NORTH from you but nowadays that don't mean anything anymore to compare accumulations. We only received 4-5 inches so far this year but it is already long gone. We're supposed to get 4 inches tomorrow ? Greetings from Salaberry-de-valleyfield.
Your camera person did a great job too.
Sure did 😁
What would you say the minimum throwing distance is? Says 3ft on the Ariens website but looks like it's more. I don't have a big front yard and I don't want to throw snow in my neighbors driveway lol.
I believe it’s how you adjust the chute when throwing. I have thrown snow just left in front of the snowblower with on 2ft of space to put it in
Looks like a great machine! I think I must live not too far from you. I’m in Glenville, NY.........about 30 mins west of Albany and just outside Schenectady.
I’m debating between this Ariens you have and the little bit cheaper Cub Cadet X2 24. Has your ariens been reliable without any issues ?
It really has been reliable. Glenville is about an hour away from me .
If they are as good as the one my dad had in 1978 that I used for 6 cust. I did everything all four seasons.That snow blower only broke a sheer pin.That was because one customer had a hidden brick.I saw a review in one club cadet model and the crank gearing/assembly broke that turned the shoot.he had to take it apart and drill a hole and put it together.I was interested in it until I saw that
Unless you had drained the carb bowl the priming should have worked regardless of whether the gas was turned on. This as priming basically pressurizes the carb bowl and forces gas up into the carb. If the gas was off, after about the third or forth priming there wasn't enough gas in the bowl to pressurize and send more fuel to the carb. If the gas was on you risked flooding it if you primed too many times.
Thanks for the comment John
Thank you very much for your video. I have a question. I just bought a brand new ariens deluxe 24' 2 weeks ago and put it in the garage. After starting the engine for the first time, every morning when you open the garage door, you will smell a strong gas. Is there a problem with the machine?
Make sure to turn the fuel line off when not in use .
@@KyleHallwoodworker Thank you for your reply, I’m sure it’s turned off, it still smells like gas
@@jasonli7861 someone probably spilled gas while filing the machine or didn't close the gas cap cover
you are absolutely right but even the 208 24" compact works faster and gets through heavy snow easier. mine compact works faster than my neighbours 28 i guess for the 28 the engine ratio is not ideal for that
Thanks for the comment!
@TheChillimouse Same here lol, The Compact 24" 208cc is no joke.💪😎💯
I just bought 24" deluxe mine seems to go to fast in first gear went by manual to slow down did not have any success???
I noticed the same in deep snow. 1st isn't deep enough. I take incremental bites or feather the drive lever like a clutch sometimes. Probably not the best for wear on the drive wheel rubber but better than cooking the engine from overloading. A wear part is more affordable than an engine.
Did you ever shut the choke off? It sounds to be running rough when not under load
My thought too - or didn’t turn it all the way to “run”
@@mitch1348 My thought three...
Say what you want but Ariens is the BEST brand on the market. One pull on the cord should tell you all you need to know.
Hello, I am looking for a new snow thrower. Does that have electric start?
Yea this does have electric start . Just need a lead cord and an outlet
yea you have to plug it in no bat
How does it work on uneven ground off the driveway with auto turn?
I think it works good . I used it to snowblow half our yard to make a sled track for the kids
@@KyleHallwoodworker THANKS
Is it normally surging like that when idling without augers or drive on?
Just in this video lol . I need to pull the carb and clean it .
It almost sounded like my my deluxe 28 if I forget to turn the choke off. @@KyleHallwoodworker
It's recommended to top off the oil on the gearbox yearly.
Thanks for this comment!
I have an Ariens 24 and are pretty happy with it. I have a question. This model allows you to pull the drive pin out of one wheel making the blower a one wheel drive. When would you choose a one wheel drive VS a two wheel drive machine. PS. Try to use gas with no ethanol and run all the gas out of the carburetor or at least run some stabil through the unit. These motors a prone to gum up over summer storage. These are not the old bulletproof Tecumseh engines built in the USA.
I never pull the pin .
Yeah mine is gummed up now . I even ran stabilizer through it lol . Probably do a video pulling the carb and cleaning it .
Pulling the pin on one wheel makes it easier to steer on dry pavement. My Toro 824 has the same setup. I never do one wheel drive because it turns plenty easily with a little snow to slide on or a little weight to one side. If you’re not using it commercially, it’s worth the money to run them on the tru-fuel type stuff. It’s expensive but if you’re not using the machine every week, it’s worth it.
@@mrmullin7 thanks for the comment!
I agree! I've got a Snapper w/4hp Tecumseh 23'' that's a mean little blower. It's 45 years old and started last winter on first pull.
I wanted to review mine but it doesn't like starting all the time.
If you got the platinum snowblower, you could donate all your snow to the church
is it ok to store these outside? I have the same machine and dont have a garage to store it in. Seems to be ok...
Keep a tarp or cover over it .
Your blower seems to be catching on the ground alot when I watch. So either your driveway or area isn't perfectly level and if it's tar or cement if you have metal skid shoes on you need to swap them out to composite. Also if it's it's flat needs to be adjusted to 1/8" up using quarters under the catch blade. If it's rough terrain needs to be about a 1/4" to avoid the machine from catching on the ground. I have a perfectly level cement driveway with composite shoes and I can go quite fast with no catching and clear the ground so there is nothing left but cement basically.
Nothing Is level bumps and rocks
Really don’t like the left to right adjustment for the chute, you shouldn’t have to lean over the controls to make adjustments 😕. Overall though, a beast of a machine. Thanks for the video!
Nice machine...eats lots of snow - . I own 2003 Ariens -- take care of it and it will take care of you --- suggest in the future you not let go of the pull cord like shown here --- hold onto it until it retracts fully -- can cause damage. Secondly - If you have not removed the wheels and put anti-seize on axles you may want to do that so over time they do not "rust weld" onto axle and be nightmare to get off - lastly -- if you have not added SeaFoam to gas you may want to do that --
Thanks for the comment William ! Great tips I appreciate them 👍🏻
Wow, for a 24", this machine EATS the snow. How is it in wet/heavy snow? (that's the real test)
We had a wet heavy snow fall a couple weeks ago and it performed great in my opinion. You do have to slow down and take your time but the machine worked through the snow with out an issue .
3 ft Fresh snow keeps it happy. This machine will not let you down. Tough guys, not too many left.
That's another thing. You can't forget about that gearbox on the till.
Mark it on your fucking calendar. 2 years.
not seen snow like that in years here in the uk
We usually get at least one good storm every year. Plus regular snow fall through out the season
Do you really store it outside all the time?
It’s in a carport
Why constantly shift it to reverse if you need to go back? I thought it easily rolls back. No?>
It is pretty easy but if you do it repeatedly you'll have a sore back the next day. :)
You should only pump it 3 times i never pump my deluxe 30 more than 3 times and it always starts on first pull, if u put too much fuel in it it creats an even larger explosion wich could warp the head, i knkw this becahse i did that to my dirt bike i put too much in in i started it ran for 2 seconds and it warped the head
Thanks for the comment bud
All depends on ambient temperature.
+Eragon that sounds like a different problem. too much full, I mean _way_ too much, could hydrolock a motor. that would cause physical damage. but damage from "warping" is typically heat related, which would suggest a lean condition, not a rich one.
*Dont read outloud to your wife*
Winnipeg bought one after first snowfall earlier this season. 12.5 she's a beast. Alkalate fuel is worth the purchase if it sits. If I was to change anything on my purchase it would be tracks. Great machine either way. Taking everyone's money. She was on the truck through minus 35(excludinng windchill) for a few hours highway speed for three hours, 3 primes one pull. Fuel line closed for the trip of course. You'll thank yourself lads. She gets it done. I'd rather have a 24 than a 28. wink More torque
It likes deep snow. It performs best in deep snow. She's hungry.
GET IT LADS. It's as strong as the operator.
Exactly.🤝
Mine works like a horse no problems other then tracks are better. I wouldn't sell mine. I'd trade for tracks though.
Hi, looking to purchase one of the but see in different reviews conflicting reports about how it does in the heavy stuff thrown up by the plows at the end of the driveway? Have you found it to have no problems? I’m trying to avoid paying for snow removal next year. Paid way too much for a very weird year with only 2 snowstorms. Not been happy with reviews for Toronto and others, too many reports of simple clips breaking. I’m a 67 yr old and do NOT want to have to deal with repairs from a junky poor design. Thank you.
I use it all around. I'm happy with it.
i love mine too but my light went out :c
Is that a halogen or an LED? IIRC Ariens is still using halogens, perhaps your bulb is burned out? I hope it's not something more costly.
@@floobertuber im not sure but its only 1 and half years old. Its a deluxe 24
It’s surging. Time for a carb cleaning.
Sea Foam fuel additive will straighten that out. Worked for me👍
Sounded like the machine was surging a little mabe the carburetor is a little dirty dont listen to me if it smoothed out though
that much gas around all that flammable material is a disaster waiting to happen ... be careful my guy ... great Blower ...!!!
Yeah I gotta get that area re organized.
@@KyleHallwoodworker A metal storage cabinet designed for flammable liquids would be a good investment for his wood shop.
After only 4 light seasons, the Muffler Shield (part 20001017) attachment flanges fracture, as well as the flanges on the Heater Box (part # 20001047) which are another point of Muffler Shield attachment. Too thin metal was used for the heat strees this part ungoes. Once fractured, Muffler Shield vibrates wildly, must be replaced. Known design flaw. No excuse, Ariens. Parts $140 or so. Not happy.
Yup mine just did as well
I have never seen a snowblower with such a small throat
ahh also that mean you had a white xmas to cool never happen here at xmas
I don't know what you"re doing partner mine burns through that.