Replace Worm gear Eumig S905 film projector instruction (PP-0069 Van Eck )
Vložit
- čas přidán 14. 10. 2024
- Instruction Video: repairing broken worm gear in Eumig S9 series, like the Eumig S910, S905, S932, etc.
New gear available from webshop:
van-eck.net/en...
For more parts for film projectors, see: van-eck.net/en...
He puesto este vídeo en mis favoritos. Es una pasada verte trabajar con tantos cables y maquinaria tan delicada y que todo funcione . Dar una segunda oportunidad a estos aparatos es magistral para mi. Me sigue impresionando veros trabajar con esa profesionalidad que es lo que falta hoy en día. Gracias por ofrecer estos vídeos tan interesantes.
Felicidades este trabajo tan bien hecho y sobre todo en estos aparatos que son una joya!! Te felicito de verdad.!!!
Justo estás reparando la pieza que se ha roto en mi Eumig S905. Cuando pueda os tengo que pedir la pieza aunque veo que lo estáis destripando un montón hasta llegar ahí . . no soy mecánica pero me encanta y paciencia tengo mucha, no sé si podría hacerlo pero los retos como este me entusiasman. Que me costaría un cambio como ese y mano de obra y envío desde vuestra localidad ?.. Que delicado todo de montar.
Grazie a Van Eck Video Service e a questo video, due anni fa, ho riparato personalmente il mio cine proiettore Eumig S940, con il pezzo di ricambio acquistato da Van Eck Video Service: ingranaggio a vite senza fine - PP-0069 per Eumig Serie S9.
Thanks to Van Eck Video Service and this video, two years ago, I personally repaired my Eumig S940 film projector, with the spare part purchased by Van Eck Video Service: worm gear - PP-0069 for Eumig S9 Series.
good afternoon, very instructive and entertaining and clear your explanatory video thank you. One question, where can I buy three gears like that, since here in my country Argentina I don't get them? thank you best regards and congratulations on the video.
You can order them from our webshop. We ship worldwide. Link: shop.van-eck.net/PP-0069.html?_globalsearch=pp-0069
Por favor poner video reparacion eumig RS 3000 se me ha roto pieza que mueve las dos bobinas .Os compre la pieza pero no me atrevo, hay que desarmar mucho y temo cargarmelo del todo. Gracias por poner videos de reparaciones.
Os falta hablar en el vídeo. Aunque hay traductores.
I have a Eumig S910 take up spool not spinning. Seems like a clutch is not placing enough pressure on the gear that drives the spool. I found this video on CZcams which is essentially the same projector, but the video doesn't explain if the worm gear is being replaced because of the issue I have listed above. Any idea, please?
عمل متقن وراثع
This is a very good product. I have fitted 2 already.
Thanks to Edwin for making these.
Frank.. Projector Heaven
Thank you! We keep your memories from 8mm and 16mm film equipment alive!
Mientras buscaba servicios técnicos COMO VOSOTROS O MAS CERCA DE ESPAÑA, compré otro igual por internet pero el envío no tiene devolución y ha sido una compra terrible ya que todo su interior está como salmitre y no se como quitar ese polvo blanco tan indeseable adherido a las piezas de metal y zonas plásticas del proyector, y el altavoz sale ruido pero no se oyen las películas , es cuestión de algún fusible ? son sonoras pero no se oyen.AHHHHHH.......SI QUE LAS HE PODIDO VISUALIZAR MENOS MAL .Gracias de nuevo.
hello, buy a dielectric cleaner for white powder!; in my case I buy one called sillijet. and stop the sound the same put it on the volume control potentiometers or isoprop alcohol Isopropyl. Also check the fuses. I hope it helps you . Cheers
I have around 20 projector of 8mm,16mm and 35 mm. How can I get the parts of any if needed. I am in India. One more point I want to get cleared that after changing any part does it require any oiling or greasing.
Thanks.
The parts you need, can we ordered via: van-eck.net/en/spare-part-finder/ We ship worldwide. At the part you can find the advised lubrication grease / oil. You can also order these.
@@VanEckVideoThanks for your reply. Sir I have one same s 905 projector with same trouble. I need this gear .How can I get this in India and what will be cost including shipping.
@@karamchand2211 shop.van-eck.net/paying-and-shipping/ for shipping fees. shop.van-eck.net/?_globalsearch=pp-0069 for price. Price is including 21% Vat. For deliveries outside EU (e.g. India) VAT is substracted.
Is dit allemaal nog te krijgen ?
Jazeker, zie: winkel.van-eck.net/PP-0069--filmprojector-onderdelen.html?_globalsearch=pp-0069
Good Evening! I buy one worm gear for my projector Eumig S912 GL HQS , today (23-07-2020) , i hope you send to me , on Brazil! TKS!
Sending to Brazil is now available again.
How to install the motor belt to the shown part 03:40
It's a bit tricky, you have to place the part first, and remove the cover of other side of the machine (where the controls are placed). Then you have to fit the belt between both roller arms. They are pushed one against each other with the spring, so they'll keep the belt under tension