Worthy to note. When you disable the MOST setting, you then disable the EXTERNAL AMP setting which changes to INTERNAL AMP. You need to add one futher step and that is to re-enable the EXTERNAL AMP setting. Otherwise you will lose all audio out.
Hello Harris! Now I know why I lasted the Audio car. I think made some mistake you mentioned. Do you know what happened and how can I fix it? Thanks a lot in advance 🙂
Another thing of note is that by disabling MOST you not only disable the external amp as Jermoe says, which will mean you have zero audio output, but because you had UCI enabled and this also reset you will now no longer be able to get an audio output via the MMI aux cable, bad video this which could cause people more problems than it fixes
Hello, I have installed Android screen in my Mercedes B180, W248 which has NTG 5.1 stereo, I have connected all the hardware correctly and I checked again, it is about AUX, Auxillary, I am not able to hear anything what is playing on the New Android screen, (I can play radio, cd and from usb memory stick and SD memory card) But I need to set the NGT5 system to AUX audio. I have tried the commands to get into Engineering mode, but my endcall+1+# doesn’t show up anything and only other 2 commans works, endcall+7+9 and endcall+3+* and I get only the Radio Frequency and some other setting in 2 commands, Can you help me to get to Engineering mode? why that endcall+1+# doesn’t show up? I am willing to pay for your information you give me. I will really appreciate if you can help me please.
I tired this and it worked, I can not get AUX out of pins 6,11,12. I'm able to get audio from the Android screen into the car speakers. However doing this disabled the Media Interface option from the head unit. I do not need this now since I will be using the android screen with apple carplay, but I would like know if there is a way together this option back in case it in the future. Thanks
Hey Tony, were you able to get back your options? I got rid of the 10" screen and went with something else and want to go back to the way it was and looking for the proper steps. Thanks
Hi Tony, do you have NTG4.5? Are you able to automatically switch to the AUX mode to get sound from the android HU? My 2015 GLA250 has AUX in the Audio menu. I just installed a 10.25 inch android HU. Cannot get auto AUX switching work so I have switch manually. I would like to know how you did it?
Worthy to note. When you disable the MOST setting, you then disable the EXTERNAL AMP setting which changes to INTERNAL AMP. You need to add one futher step and that is to re-enable the EXTERNAL AMP setting. Otherwise you will lose all audio out.
Hello Harris!
Now I know why I lasted the Audio car. I think made some mistake you mentioned.
Do you know what happened and how can I fix it? Thanks a lot in advance 🙂
Another thing of note is that by disabling MOST you not only disable the external amp as Jermoe says, which will mean you have zero audio output, but because you had UCI enabled and this also reset you will now no longer be able to get an audio output via the MMI aux cable, bad video this which could cause people more problems than it fixes
I'm having the same issue with my android 10 installed audio is not coming from the aux ami connections. would love some help here
Hey , you got any solution ?
Hi is there a setting to adjust equaliser
Hello,
I have installed Android screen in my Mercedes B180, W248 which has NTG 5.1 stereo,
I have connected all the hardware correctly and I checked again, it is about AUX, Auxillary,
I am not able to hear anything what is playing on the New Android screen, (I can play radio, cd and from usb memory stick and SD memory card) But I need to set the NGT5 system to AUX audio.
I have tried the commands to get into Engineering mode, but my endcall+1+# doesn’t show up anything and only other 2 commans works, endcall+7+9 and endcall+3+* and I get only the Radio Frequency and some other setting in 2 commands,
Can you help me to get to Engineering mode? why that endcall+1+# doesn’t show up?
I am willing to pay for your information you give me.
I will really appreciate if you can help me please.
How to enable Input Video?
I'm having the same issue with my android 10 installed audio is not coming from the aux ami connections. would love some help here
Are you using a keyboard to navigate?! And it works if the knob is not functional?!
Please, how can I do for Video aux?
I tired this and it worked, I can not get AUX out of pins 6,11,12. I'm able to get audio from the Android screen into the car speakers. However doing this disabled the Media Interface option from the head unit. I do not need this now since I will be using the android screen with apple carplay, but I would like know if there is a way together this option back in case it in the future. Thanks
Hey Tony, were you able to get back your options? I got rid of the 10" screen and went with something else and want to go back to the way it was and looking for the proper steps. Thanks
@@shearcarnage what did you install instead of the 10" screen? another Android unit? perhaps 12.3" ?
Hi Tony, did you figure out a way of getting media interface back?
Hi Tony, do you have NTG4.5? Are you able to automatically switch to the AUX mode to get sound from the android HU? My 2015 GLA250 has AUX in the Audio menu. I just installed a 10.25 inch android HU. Cannot get auto AUX switching work so I have switch manually. I would like to know how you did it?
@@mybluewater1 did your aux work for Android Hu ?