Thanks man!I'm glad you like it. My mount is completely custom as the Tuareg doesn't have enough mounting points under the triple tree. You can check my previous videos to see what I did. CamelADV is working on theirs as well
I like the High Fender a lot! Makes the bike look much better. As for the front brake oil line, another solution would be completely removing one of the brake rotors and caliper.
Thanks Man, yeah there are multiple solutions about the brake line Like you said, make a single brake caliper conversion Or cut the front of the OEM fender, and cut in half the high fender. Like the new T7 extreme edition and the new KTM 890 Adventure Super moto
This is the best looking Tuareg 660 front! Anyhow, I guess it was a costly change of the forks but I guess you can still use the original forks and add high fender.
@@SuperCheesyMan Ooh I understood that you had changed the whole fork with WP forks from KTM 890r. My mistake. I hope that there is not a lot of vibrations on the front tire with the high Polisport fender because it looks amazing. I have experienced issues with high fender only when the speed is above 120 km/h and there are strong side winds.
The illumination doesn't change with the high fender on, however I find that the Tuareg isn't very bright when riding at night. Adding 2 fog/spot lights makes a big difference :)
@@SuperCheesyMan on my cfr250l I can see clearly that the beam is blocked by the fender, you have the shadow of it. I hope that on the tuareg will not have that problem cause with the high fender is so sweet
Salut Efixe! Sympa le mod! Je voudrais savoir aussi d'autres choses, tu es content du sabot moteur heed? Les support latérale de GIVI sont-ils solides en cas de chute? Merci d'avance pour ta réponse ✌😉
Salut Daniel, ouaip franchement HEED c'est du bon matériel, je fais tomber ma moto souvent quand je fais du offroad et elles tiennent bien le coup. J'ai cassé les fixations du sabot sur un énorme caillou en descendant une pente, et j'ai pu racheter des nouvelles pièces chez HEED. J'ai remplacé mes protections par le nouveau sabot AXP et les barres de protection Outback Motortek (elles se plient super facilement. A éviter) En gros HEED a le meilleur rapport qualité/prix :)
I was concerned too. Turned out it was super easy. Just a normal procedure to bleed the brakes. To flush the abs pump, take the bike for a ride and brake hard to activate the ABS. Done!
This looks awesome man! I never knew this was available! When I bought mine I thought that this is exactly what it needed to look perfect! Great work!
Thanks man!I'm glad you like it. My mount is completely custom as the Tuareg doesn't have enough mounting points under the triple tree. You can check my previous videos to see what I did.
CamelADV is working on theirs as well
Hi what fender did you use? Going to do this on mine
@@mikebaines4111 it's the Polisport Universal SM Line
Looks great
I like the High Fender a lot! Makes the bike look much better. As for the front brake oil line, another solution would be completely removing one of the brake rotors and caliper.
Thanks Man, yeah there are multiple solutions about the brake line
Like you said, make a single brake caliper conversion
Or cut the front of the OEM fender, and cut in half the high fender. Like the new T7 extreme edition and the new KTM 890 Adventure Super moto
That looks so much more "Moto" - I love it!
yeah it's a nice change for the standard look :)
Looks much better . Love it ❤
This is the best looking Tuareg 660 front! Anyhow, I guess it was a costly change of the forks but I guess you can still use the original forks and add high fender.
Thanks, adding the fork guards were cheap. Got a set from a used KTM 890r adventure for 30 bucks :)
@@SuperCheesyMan Ooh I understood that you had changed the whole fork with WP forks from KTM 890r. My mistake. I hope that there is not a lot of vibrations on the front tire with the high Polisport fender because it looks amazing. I have experienced issues with high fender only when the speed is above 120 km/h and there are strong side winds.
@@lyubengeorgiev1751 oh hell no I'm not that rich 😅
My bike has been very stable with the high fender....
I think looks awesome but for what I need to do I will stick with the standard. I prefer more illumination on the road. Good one 👍
The illumination doesn't change with the high fender on, however I find that the Tuareg isn't very bright when riding at night. Adding 2 fog/spot lights makes a big difference :)
@@SuperCheesyMan on my cfr250l I can see clearly that the beam is blocked by the fender, you have the shadow of it. I hope that on the tuareg will not have that problem cause with the high fender is so sweet
@@Nulrom the CRF's fender is waaaay longer than the Polisport I installed (I had CRF Rally).
Really it doesn't change a thing here :)
@@SuperCheesyMan I'm so glad to hear 🤩
Salut Efixe! Sympa le mod! Je voudrais savoir aussi d'autres choses, tu es content du sabot moteur heed? Les support latérale de GIVI sont-ils solides en cas de chute? Merci d'avance pour ta réponse ✌😉
Salut Daniel, ouaip franchement HEED c'est du bon matériel, je fais tomber ma moto souvent quand je fais du offroad et elles tiennent bien le coup. J'ai cassé les fixations du sabot sur un énorme caillou en descendant une pente, et j'ai pu racheter des nouvelles pièces chez HEED.
J'ai remplacé mes protections par le nouveau sabot AXP et les barres de protection Outback Motortek (elles se plient super facilement. A éviter)
En gros HEED a le meilleur rapport qualité/prix :)
J'ai mal lu ta question ahah. Les supports latéraux tu parles des porte bagages GIVI? Si c'est le cas, ouaip suuuper solide :)
awesome build! Is there any chance you can share you design for the fender adaptor? I can wire you some money for it as well. Thank you.
Oh man you don't need to. CamelADV now sells a high fender kit for the Tuareg. Look it up on google :)
what brand of high fender didn u instal on your bike?
Polisport SM universal
I love the crash bars you put. Do you have the brand and model please?
hey man, those are HEED crash bars/skid plate combo, look for Heed Tuareg 660 on google :)
Love the setup! What headlight protector do you have?
It's the AliExpress one. Just look it up. Tuareg 660 headlight protector. :)
I painted mine in white
@@SuperCheesyMan Looks awesome. Love the look!
@@granthammon9023 thanks bud :)
Is it easy to change the oil line and fill it up again? I am I little concerned about the abs
I was concerned too. Turned out it was super easy. Just a normal procedure to bleed the brakes.
To flush the abs pump, take the bike for a ride and brake hard to activate the ABS. Done!
What bike is the front fender?
Are there any modification to make to mount it?
Thank you
Front fender is a Polisport Universal SM,
The mounts are completely custom. CamelADV is working on theirs but no ETA
Hello
Looks great 👍where do you find the hose clamps?
Hey I designed them and got them 3D printed.
Now I replaced them with CNC clamps I found on AliExpress. Much better and durable
@@SuperCheesyMando you have link pls?
@@davidprachar5222 yup right here
a.aliexpress.com/_mqMyKEK
gay AF. high fender on enduro, low on adv ;
Hahahaha that's cute, but I don't care about your opinion
Let me guess you also liked your own comment? So gaaaaaay 🤣🤣
It must sucks being you 🤣🤣