Door Skin and Quarter Panel Repair | TOYOTA CAMRY
Vložit
- čas přidán 26. 08. 2024
- Check out my shop for all toolslinktr.ee/AUTO...
This Toyota came in with damage on the rear door and quarter panel.
We replaced the rear door skin and repaired the quarter panel using conventional autobody shop methods.
As an Amazon Associate, I earn a small commission from qualifying purchases. Some of the links are affiliate links and if you decide to buy the tools through them I earn a tiny commission. It costs you nothing but helps me big time.
Astro Pneumatic DS1000 Pneumatic Door Skinning Toolamzn.to/3uuEoEg
Slapping Fileamzn.to/49vFKOu
Slide Hammeramzn.to/4bNL2q2
Wiggle Wireamzn.to/3TcR8ZV
7 Piece Dura Block Sanding Kit:amzn.to/48xvNj3
Steck Quarter Panel Puller 20022:amzn.to/48NjvCJ
Astro Pneumatic Tool 930 Mini Reciprocating Air Sawamzn.to/41SYQeq
Sunex SX8200 Surface Blaster Kit:amzn.to/48J7Swz
The MAXI - 220v:www.dentfix.co....
Evercoat Rage OPTEX Color Changing Filler:amzn.to/3OhiHhR
Evercoat 425 Metal Glaze Ultra 30oz:amzn.to/492KXg7
Canadian Tool and Supply 7-Inch Air Angle:amzn.to/3tJ2zOQ
Wurth 1/4" ANGLED 90 DEGREE DIE GRINDER:shop.wurth.ca/....
Mirka MR-6 Finishing Sander:amzn.to/3vrjje5
Body Line Tool:amzn.to/3tNoZP1
Martin 1024 9" Blade Surfacing Spoon:amzn.to/3SbJ8I5
Uni spotter 5500:www.toolsource....
3M Belt Sander:amzn.to/48qO4hI
Milwaukee M12 FUEL 3/8 Stubby Impact:amzn.to/3H9va2V
Easy Strip Discs Angle Die Grinderamzn.to/3TbxFax
Pry Bar Scraperamzn.to/3Pn6Oax
I’m a 21 year old body tech apprentice and I love your work bro and videos I learn a lot thank you !!
Same here but I’m 20
I appreciate that
love your work, keep it up
Thanks, will do!
hi, what's the spray that you use to see the result at the end ?
Btw love ur videos :)
It's called quick check made by quick90.
You can use a prep de greaser as an alternative. Thanks!
Great work! I used to do door skins by hand until I found that Astro door skinning tool! It’s one of my favorite tools! Saves so much time. Keep making great videos
Yup!! It's a game changer for sure!
Thanks
Great video!
Thanks for sharing great work
Thank you too
👏👏👏
Yea that was done all wrong… not painted on back side ..not sanded with 80grt on back side for adhesive bond. That skin will rust out
If you want to see all the steps in detail, check out my other door skin video! Also the door gets fully painted inside and out after the install. Thanks for watching!
What’s the name of that puller you were using? Is that a spot shrinker?
It's called The Maxi, Its a dent puller with multiple attachments. It also has a shrinking bit attachment
Where did you get that tool you use to seperate skins,i got a regular weld thru breaker but i like the tool your using?
Hey! it's a regular pry tool from Home Depot. I sharpened the end to use as seen. Check out my tool links in the description
8:18 what is that spray ?
Quick check. It's a clear coat simulator to cross check your body work
@@AUTOBODYTECH Good, it is on sale here in Canada? I'm from Gatineau 👍
@lermi15912 Alternatively, you can use wax and grease remover, but this works better! Awesome!! I am in Ontario not far from you
@@AUTOBODYTECH I use sikkens M600 Surface Cleaner to check mi work but could be better to try that spray and see how doest it works, It is good to know you are near Gatineau, are you in Ottawa ?