I ordered 1 also earlier. Had second toughts before, but I really like the looks of it. Much better than those brackets for the sidemirrors. But I wonder if I need to adjust something for the the bolts on the sides. Do I need to put some innerbolts like the ones for the visor? The brass or stainless ones that replaced the rubber ones
@lenysalangsang I did, with the brass nuts. But it still has a spacing between the body of the bike above the headlight. Cant make it more tight, cos the spacing is only the pointy part, not on the sides. Still happy with it. Maybe its for rain drainage, no idea
How much itong facelift set for N nax 2024 fitted ba ito sa new unit ano ang complete description kubg oorderin ito sa Lazada pls or direct order sa inyo
gusto q dn san bumili nito, kya lang ngdadalawang isip na aq.. bka kc maalog, tas ung knakapitan ng side mirror bka mabasag kpag natagtag. any feedback mga boss sa mga nkabli na dn?
@@abcarillo there actually was some vibration on the set I ordered from your shop on shopee. From the 2 plastic brackets on the windshield. Its only 1 bolt per bracket and the top should be locked in that square hole with plastic clip. The hole was 3x wider than the clip, so I added a piece of rubber spacer and is nice and tight now. Very happy with the looks of it. Only checked vibration by running it on the centerstand due heavy thunderstorm after installing. Really happy with the looks. Really hated the looks of the r3 bracket and the batmanbracket.
@@otszzz79 Thanks for the info. Planning to get one too. A few more questions, how's the view angle from the side mirrors? Can you see everything? Are the hands visible? After you installed it with the rubber, were there no more vibrations?
@@BenjaxRivera there is no extra vibration. Like all the nmax and aerox models the issue is vibration when start and when temperature is low. I just start and let ot run in stationairy , turning tcs off for moment and throttle before I go. The mirrors, look nice but the view is less, guess the mid stem model is better for clear view. Missing the angle to spot kamotes taking over suddenly sometimes. And I saved the protection foil of visor, used it to maoe a mold on paper for spare visor and made a spare visor already. Worked out pretty well, curved and all. Some roads to Laiya and other surrounding area's here have lots of roadworks ongoing. So lot of sand, rocks on the road
@@BenjaxRivera here is a little sample, got my left mirror on a wider angle and the right a bit more narrow so I can see the ones suddenly taking over on the right better. The vibration is same as original set up, and way less compared to the bracket I had before. Didnt use the rubber spacers for the kit. czcams.com/video/gmBXLihB_50/video.html
Ayos na ayos, inadd ko na sa cart. Hinihintay nalang ung bonus hahaha. More power sa inyo lodi.
buti nlng nagsearch muna aq bago bumili.. sa fiber lng nka kapit ung side mirror.. magka crack yan for sure pag tagal
Solid sa angas .... pagbalik ko Pinas pakabit ako boss
Perfect
Kamusta po viewing angle ng side mirror sa haràp? Kita lang naman po properly?
nakikita po ba sa likod yung short stem side mirror ?
Nice,ganda boss san mo nabili yang gnyan
di po ba nagagasgas yung pinatungna na cover?
Ayus na byahe lods, nakadikit na sayo sana maka resbacks naman sa support lods thanks
No prob po ba ang naked handle bar sa metro manila?
By any chance na nakapag try mag palit ng visor lang? Sukat po kaya ang visor ng xmax?
Sir pwede itaas kunti Yong side mirror holder
Can I install this on NMAX 2020?
I ordered 1 also earlier. Had second toughts before, but I really like the looks of it. Much better than those brackets for the sidemirrors. But I wonder if I need to adjust something for the the bolts on the sides. Do I need to put some innerbolts like the ones for the visor? The brass or stainless ones that replaced the rubber ones
You need to replace the rubber to make a perfect fit.
@lenysalangsang I did, with the brass nuts. But it still has a spacing between the body of the bike above the headlight. Cant make it more tight, cos the spacing is only the pointy part, not on the sides. Still happy with it. Maybe its for rain drainage, no idea
Pangarap ko yang voltron mask kaso may utang pa ako sa shopee 🤣
How much itong facelift set for N nax 2024 fitted ba ito sa new unit ano ang complete description kubg oorderin ito sa Lazada pls or direct order sa inyo
Pano kung may vibration sir sa may side mirror? Review muh sir slamt. Suscribe kita. 😊
Pwede ba dyan side mirror na parang pan ninja?
What if only the visor needs to be replaced? Need to buy a complete new kit?
YES
@@abcarillo thanks for the info, will skip that one.
Parang nakita ko pic mo sa Rates sa shoppee. Haha
Kira ba mga kamay sir sa side mirror?
pasok din po b sa pcx160
lokasi dimana bang harga berapa klo di online shof di apa?
Déjame el link de otra forma instalación
short stem ba gamit niyo sir
San mabili yan at pede pakabit
d b maalog yn o mvibrate ?
meron po bang para sa nmax v1?
May ganyan ba na pang v1 boss?
Sir pano mag order …at magkano ganyang style?
Kl mau pesan link dimana
san maka bili ng side mirror paps
Fit po ba sa nmax v2.1?
Meron bang glossy nyan boss?
Harga berapa
Boss magkno po ung ganyan facelite
Magkano po lahat yan kasama shipping? Taga bohol po ako
indonesia shopee?
How to order boss ?
Meron bang carbon fiber niyan
Kano po pa set
How can i order sir?
Pa link lazada shop boss
How to order po?
san pi nakakabili nyan ser at magkano po
Hm po
Mgkano boss ganyan
Bossing anong remedyo mo dun sa mask nagagasgas kase yung fairings ko e siguro sa vibration bumabakat yung mask sa fairings
lagyan mo ng carbon fiber sticker yung part na gagasgas, puwede mo din lagyan ng strips sa gilid, yung nilalagay sa visor.
Maalog ba to lods
vibrate sigurado ng side mirror nyan.. hindi solid ang base na pinaglagyan
Ada ini xmax look for v1 nmax?
meron po pang v1
gusto q dn san bumili nito, kya lang ngdadalawang isip na aq..
bka kc maalog, tas ung knakapitan ng side mirror bka mabasag kpag natagtag.
any feedback mga boss sa mga nkabli na dn?
super goods
boss send me the link where to order facelift version.thanks
POSTED IN SHOPEE ACCOUNT
@@abcarillo what's your Shopee account name?
lazda meron p0 b ?
uubra kaya to sa rusi rfi?
Pang nmax lang po sir.
hm san po noorder?
seller.shopee.ph/portal/product/14250612756/
Magkano boss?
Hindi b maalog yan boss pag naandar na
Hindi sir
Konting higpit pa crack Yan..😂😂
Di ba maalog o mavibrate??
D po
boss link nga po..thanks
seller.shopee.ph/portal/product/14250612756/
hm yan paps
5200
Copy by Difcustom design production Indonésia 😂👍🏻
boz LTO legit ba yan?
yes
Hm yan boss?
5,200 sir
Paps san mo nabili to paps?
SA SHOPEE ACCOUNT PO NAMIN NAKAPOST
meron po b s lazada yn bozz ?
How is the vibration when driving. No annoying sounds from the plastic hood and vibrating mirrors?
No vibration and no annoying sounds
@@abcarillo there actually was some vibration on the set I ordered from your shop on shopee. From the 2 plastic brackets on the windshield. Its only 1 bolt per bracket and the top should be locked in that square hole with plastic clip. The hole was 3x wider than the clip, so I added a piece of rubber spacer and is nice and tight now. Very happy with the looks of it. Only checked vibration by running it on the centerstand due heavy thunderstorm after installing. Really happy with the looks. Really hated the looks of the r3 bracket and the batmanbracket.
@@otszzz79 Thanks for the info. Planning to get one too. A few more questions, how's the view angle from the side mirrors? Can you see everything? Are the hands visible? After you installed it with the rubber, were there no more vibrations?
@@BenjaxRivera there is no extra vibration. Like all the nmax and aerox models the issue is vibration when start and when temperature is low. I just start and let ot run in stationairy , turning tcs off for moment and throttle before I go. The mirrors, look nice but the view is less, guess the mid stem model is better for clear view. Missing the angle to spot kamotes taking over suddenly sometimes. And I saved the protection foil of visor, used it to maoe a mold on paper for spare visor and made a spare visor already. Worked out pretty well, curved and all. Some roads to Laiya and other surrounding area's here have lots of roadworks ongoing. So lot of sand, rocks on the road
@@BenjaxRivera here is a little sample, got my left mirror on a wider angle and the right a bit more narrow so I can see the ones suddenly taking over on the right better. The vibration is same as original set up, and way less compared to the bracket I had before. Didnt use the rubber spacers for the kit.
czcams.com/video/gmBXLihB_50/video.html
How much po yan set?
5500
saan ko po kayo pwede macontact?
@@kevincarlblanco2341 0927-406-2351
HM PO??
5200
pa link boss ng lazada
sellercenter.lazada.com.ph/apps/product/publish?spm=a1zawj.24863640.table_online_product.d_action_edit.36c74edfDC4oLo&productId=2730762243
BABY TMAX LOOK FACELIFT
HINDI " XMAX" HAHAHA
Hm po boss?
5,200
Sir pwde bang ako na lang ang maginstall or dalhin ko pa sa shop nyo?
pumangit boss
Orang indonesia gada yg bisa bikin nih? Biasanya @AFMOTO yg but ginian
lokasi dimana bang harga berapa klo di online shof di apa?