2004 Mazda 6 Side View Mirror replacement

This is a step by step video on replacing a broken side view mirror on a 2004 Mazda 6.
Here is an Amazon link to the side view mirror I used in my video amzn.to/11GhIhp
~-~~-~~~-~~-~
Please watch: "Are Nordic Air Filters a way to save money? Review Inside!"
• Are Nordic Air Filters...
~-~~-~~~-~~-~

[@pjjones897]

Mt wife lost a battle with a garbage can and I had to replace her mirror...thanks for taking the time to post your video it really helped me complete the job without too much cursing(: Many regards - PJ

[@fransheridan1881]

I used your video to change the driver's side mirror on my son's 2005 Mazda 6. Everything was as the video showed. Quick, easy, and painless. Thank you

[@kaitlinespanol6064]

This video also works for a 2003 Mazda 6! Thanks for a helpful and easy to follow video!

[@alexcherney4586]

Thank you man you're a life saver! Followed your instructions and had everything done in 20 minutes.

[@mjoshimd]

That was a great and informative video. I had broken my mirror on my 2004 Mazda and was going to take it to the dealer, but was able to do it myself with a mirror purchased from Amazon after watching your video. The hardest part was probably getting the door panel back on correctly. Thanks for sharing your knowledge!

[@ChaTobProductions]

Very helpful and clear cut where it was most needed. I took a bit longer than your 16 minute video (which is certainly par for my course anyway) but like a few of the previous commentators I appreciated not only having the guidance as to what to do and which order to do it in, but also saving quite a bit of money installing it myself. Many thanks for posting it!

[@chrisanderson4310]

Hey Thanks for great DIY video!! Thanks to guys like you doing the hard work I was easily able to replace my Mazda 6 2007 mirror!! You're the best! Total cost $37.04 for part on eBay...

[@Nemesis099]

Awesome!

[@mokana713]

Thank you so much for this tutorial. It really helped me after I snapped off the mirror of my car.

[@ednolan402]

Thanks for posting. Saved me a lot of time trying to figure it out on my own.

[@mdlairdjr]

Very helpful. Thank you for posting. Just replaced the mirror on my daughter's 2003 Mazda 6.

[@danielmccamish3080]

Thank you!! Just got this Mazda last weekend. $38 for the part on amazon.com... about 1/2 hour to install. Non-heated mirror connects fine... motor works, harness fits, just no wiring for the heating element. Door panel on this car is a dream to work with. Colored outer mirror covers aren't interchangeable (this car is red), so I left it black for now.

[@palemoonknight]

Thanks for the vid, i finished mine in less than 25 minutes. Instructions made it easy and quick

[@roger9328]

thanks for this, I just bought an 05 mazda 6 and the driver's side mirror was missing, so this was exactly what I needed.

[@nikkibear85]

Thanks so much for titling this rear view mirror replacement and replacing the side view mirror!

[@zandapp]

Thx...Just what I needed to know. A lot easier than I thought it was going to be.

[@pereirarichard07]

Thanks for taking the time to make the video. It was extremely informative.

[@Nemesis099]

Glad to hear it! I thought the videos that were out there left a lot unexplained.

[@bannor7]

Thanks so much--went from spending to $275 (!) for dealer installed to $35 for buying online and installing myself. Wow.

[@orlandojackson2341]

bannor7 What site did you order yours from? I need my passenger side.

[@Nemesis099]

+Orlando Jackson ordered from Amazon not sure of pricing today.

[@christopherjimenez9758]

So I watched 3 videos on how to replace the mirror on my 2009 Mazda 6 all of them showed having to take the complete door panel off. That is so unnecessary when you pull the speaker off all three screws to hold the mirror on are right there one of them you have to use an open-end wrench and be a little careful so you don't drop the nut but no need to take the door panel off

[@gizmaticopappy1524]

Thank you for this video... It helped tremendously... You sir.... Are a rock star

[@flintapanda]

Thanks!just followed your instructions and it worked out perfect

[@bertodias80]

Thanks a lot man you just made me save a few dollars... great job

[@mtl514dg]

Thanks a lot,
got the mirror off amazon as well.

[@xIrHaxor]

i removed the 3 screws that are required, but it still feels really tight (on the side where you are pulling first to get the door frame off) like there's another screw. i do have a 2005 but its very similar. I'm just wondering if it was a little tough to pull from on that side.

[@Nemesis099]

The first time I went to take the panel off I missed a screw and found it to be held on really tight. If you feel it is held in the middle of the panel maybe Mazda did add another screw somewhere but if it is near the side of the panel it is probably a clip that is really tough as it does take quite a bit of force to get it off.

[@xIrHaxor]

cool i'll give it another good pull once i have the time .... thanks for your help

[@jimmon3023]

Thanks for download the video, it helped me a lot.

[@crazyeye1]

Thank you for the useful information bro

[@miditime]

No need to pull the door panel.
Just pop the little corner panel over the 3 bolts, and you have enough access to make the switch. I was done in 5 minutes with a 2012 Mazda 6.

[@Nemesis099]

***** 2012 is a newer model design. Glad they decided to make this job even easier!

[@tyronestewart446]

Very helpful and easy

[@sinanoorani7513]

It helped, thank you

[@bettereveryday9034]

Thank you!

[@xNickyJ]

i can’t find the clip when i take the
chords out of the white part

[@JosrRocks]

thank you

[@Rjborgs]

Is this similar to 2014 model replacement?

[@Nemesis099]

I’m not sure they probably changed some of the screw locations

[@Rjborgs]

Do you think I would need to take off the door panel tho? A deer took the whole thing off

[@Nemesis099]

I know I had to but I don't know if they changed anything as I think the 2014 was a newly designed model.

[@ztnebii]

thanks men a lot

[@henrycowan8824]

You Lookin fiiiinnnneee🥴

[@ismaelperez9256]

Bullshit don't need to take the door panel off did it without doing that