VXLAN Bridging with BGP EVPN - Step-By-Step Configuration

In this video, I have demonstrated how VXLAN bridging works with BGP EVPN. A detailed step by step demo on Arista switches.
Download the free PDF file containing the slides and configurations shown in this video.
If you find it valuable, consider paying what you like. Your support encourages me to create more valuable content:
ko-fi.com/s/d4...
For VXLAN Bridging packet walk, watch this video:
• VLAN Switching vs VXLA...
12:16 Configuration Steps
16:23 Configuration on the CLI

[@getadvice6412]

Thank you so much for the Video. superrrrly explained the concept

[@sunilmallya6147]

Thanks for the video and your valuable time. Really loved it

[@MalayMaverick]

I don't see the configs in the video description, have they been removed ?

[@CCIEOnTheSpectrum]

@@MalayMaverick can you see a link in the description? Received many emails, ppl were asking for slides as well, download the pdf it has both slides and configurations. Dont worry its free . Let me know if there is any problem. Cheers

[@MalayMaverick]

@@CCIEOnTheSpectrum Thank you. I got a question though. I see that you have used "interface Vxlan 1" and used the vni mapping inside it. Is it different than configuring "interface nve 1" ?
Or it just varies from code to code ? I am trying to figure out if interface Vxlan and interface nve both do the same thing.

[@CCIEOnTheSpectrum]

@@MalayMaverick correct. What cisco calls NVE, Arista calls it Vxlan1 interface. Its just a virtual interface that encapsulate/decapsulates packets for vxlan.

[@sagartorase5154]

please make a video for different vlans

[@CCIEOnTheSpectrum]

Sure, very soon

[@ferozsyed2014]

very informative, and kinda confusing so am going to make it lab to see how its going to work.

[@CCIEOnTheSpectrum]

Thanks. Sure practice it. Whats confusing, let me know?

[@ferozsyed2014]

@CCIEOnTheSpectrum confusing part about Route dustinguser and route targets. How does it map Mac to ip and where the encapsulation and decap are happening.

[@CCIEOnTheSpectrum]

Didn't understand your question. RD/RT are just like L3VPN, RT is used to install the routes in right MAC-VRF. VNI information helps for data plane forwarding. Split the concept in 2 parts control plan and data plane, would be easier to understand then.
MAC to IP?? leaf switches don't need to learn about IP in this case, they are just acting like a layer 2 switch as its VXLAN bridging demo.

[@AdouYaoMAuriceAmalaman]

great explanation . Thanks alot

[@LanternDevilYT]

Hi sir,
I have shared a mail for PDF
Please consider this request and share the PDF.
Thank you

[@CCIEOnTheSpectrum]

@@LanternDevilYT hi dear, sure, i ll put a link for the pdf. Thanks for reminding.

[@AdouYaoMAuriceAmalaman]

Sir plesae share the PDF i've sent an email to you

[@CCIEOnTheSpectrum]

Sure, i will email you.