How to install the Associated 4 shoe clutch system on nitro engine
Vložit
- čas přidán 12. 09. 2024
- If you try to install this clutch system any other way it will not work, I had built the clutch system first off of the engine & then tried to install it & it just wouldn’t fit, eventually I found out the problem, flywheel has to be installed first then the shoes
Watch the video & follow the steps
Thanks for watching
Subscribe, like and share the video
Im 100 years old now…….Thx for the video
Thank you for making this video. Not too fast and not too slow, really easy to understand for a beginner like me.
Thanks, glad you found it helpful
I recently came across your channel. I’ve enjoyed your videos, and feel you do a great job. Subbed
Thank you 🙏
Thank you for making this video. I feel confident building mine now. I appreciate it.
Glad it helped you
Great video and thanks!
Todo un cirujano con su proceder
.... solo creo dalto anestesiar al paciente...
you didn't use a tie wrap or piston stopper???
I used a thick zip tie
whats the trick getting flywheel off
They actually have a special tool to get it off or els tap it off with a hammer
Is that clutchbell bigger than most?
No, it’s the AE clutch, I think it looks big because of the closeup
It actually is installed differently than most, on this one you have to install the flywheel without the shoes first, after you have the flywheel on tight then you go ahead and install the clutch shoes
Why the marking of bottom dead center on flywheel? Whats the point?
That’s only if you’re a beginner it’s more of a tip for a beginner a experienced person probably doesn’t need it, but it’s so you know if your piston is at the bottom visually pretty much
@@weekendrc But why do you need to know that? Or when does your piston need to be in that exact position? :)
@@dieseldoesthings527 it’s good to know because if your piston is not at bottom bead center after a run you need to get it down because if it’s at top and your engine cools down the piston can get stuck and if it gets stuck up at top your probably going to have to take your engine apart or use unnecessary force to bring the piston to the bottom that’s why it’s important that your piston is at bottom dead center after every run hopefully this answers your questions
Nice video but the music is terrible
Yeah I know lol sorry for that it’s really hard choosing music
Np! I noticed you didn’t use the spring cam, any reason why?
❤🎉😮😊ไฟไฟแดอ์