DIY Guitar Pedal Guide - Fuzz Factory & Soldering The Circuit - Part 2
Vložit
- čas přidán 25. 08. 2024
- Part 2 of my DIY guitar pedal guide focuses on how to build and solder the circuit for a Fuzz Factory clone. This circuit is quite small and doesn’t require many components, so it should serve as a good introduction for beginners. But to be honest this pedal isn’t for everyone. If you currently don’t have a fuzz and are wanting to build one, then you might want to start with a more traditional fuzz pedal. The Fuzz Factory isn't your typical fuzz, it can do some crazy oscillation effects that are great for experimental sounds!
Part 1 of this guide: • DIY Guitar Pedal Guide...
Part 3: • DIY Guitar Pedal Guide...
Previous video where I demo my custom built pedalboard: • My Custom Built Guitar...
Previous video on DIY Marshall JCM800 clone: • Build Your Own Guitar ...
Fuzz Factory stripboard layout: tagboardeffect...
Schematics and instructions to build your own beavis board: beavisaudio.com...
Weller Digital Soldering Station: amzn.to/3QKd5OP
Hakko Digital Soldering Station: amzn.to/45vswz1
These are affiliate links where I earn a small commission for purchases at no extra cost to you.
This is the easiest way to help the channel, thank you!
Amazon: amzn.to/484HUnU
Website: phazertech.com/
Donations
Buy me a coffee: www.buymeacoff...
Something I should have mentioned: Make sure electrolytic caps are orientated correctly as shown in the layout. The white stripe indicates which side is negative polarity. If they're not correct then they might pop!
Great job, man. Very thoughtful and thorough. Sounds right too! 🤙
Thanks man I really appreciate that!
I want to build some of these for my son so your video was very helpful. I know my way around electronics already, but just the general tips of what to buy was insanely helpful! Thanks!
Glad to hear it was helpful for you. I'm planning to show a modded guitar in several weeks which I think will be pretty interesting, so stay tuned!
just started on my Big Muff Pi clone with 4x 2N5088, this looks like a fun one too.
Nice, the Big Muff is a great choice for the more traditional fuzz sound. I have one on my board and it rips!
Very interesting! You motivated me to make my own. Just one question, do you have a diagram for adding the fat switch?
Awesome I'm glad to hear that! Yes it turns out there's another layout which includes the fat switch, but instead of a 3-way toggle like the original, this one is only a 2-way switch. tagboardeffects.blogspot.com/2017/12/zvex-fat-fuzz-factory.html
I have a spare dual rail variable +- 18vdc linear psu if someone needs it.
Use good solder too. Its a horrible place to cheap out. Cold joints are the worst. That board holder hinders more than it helps. I had one and donated it. I replaced all the jelly bean parts i learned using with digikey orders. Caps alone cost me 200+.
Having good fluxes and solder braid is good too. I use vector board or etch my own. I spent a fortune on liquid tin haha. I regret it haha. Busboard systems brand protoboard is awesome as well. Cheap too considering you can cut the pcbs and get 4 circuits that you know will work.
Im buying a tektronix curve tracer. Im gonna sell my rtx 3090ti while it's still worth money.
A good jbc station is good too. Moat people dont realize that the pedal dc jack should be center negative. Makea biasing the transistors and comparators easier. Hahaha you said negative as i typed it.
I'm using the solder that came with my soldering iron. Is that good enough?
@@fernandosepulveda7297 yeah man. Some cheap stuff is great. Chipqwik is super cheap and just as good as kester or mg chemicals imo. Some of the cheap stuff forces you to use more flux sometimes I find bro. Sorry if I sounded snobby. I used plumbing solder for changing pickups for years but I retired super young and have just bought stuff on sale here and there. Donated tons of stuff. Got burned on opamps way too many times though
Dude you need to practice scales. No offense. Great content though