Best blades for me is the is the bablyliss OEM blade, babyliss taper blade, and oster fast feed blade. Good all around wahl fade, jrl vapor and andis taper blade. (Don’t last long) Every other blade either pulls or snags the skin, or just doesn’t as I like no matter how it’s adjusted.
In my experience with them all, the caper blade set is less forgiving when fading. Super intentional with how it cuts. Works different depending on the hair type
The black wedge blade goes through bulk just as good as any blade up there, plus it’s fades cleaner and closer, so I don’t understand why it’s not used as much. And it naturally lays flat on the scalp when blending and detailing. Most barbers think fade blades are the way to go when fading but don’t hold the blade flush to the scalp, instead they use the blade at a 45 degree angle which is wrong.
Rad content my guy, i love that babyliss blue blade. I use it on my Tpob goblins. It’s my go to for detailed fading. What are your thoughts on the wedge blade and the blade that comes on the TPOB Play? Respectfully
Switching the blades out to ceramic does not make the blade move faster. I tested this out with two corded fast feed clippers. I used the RPM app, Giri. Both machines ran at 3633.7 rpms. Unless I’m incorrect, I think the machine is capped at that rpm speed which would make the blade move at the same speed.
i have that rpm tester as well ...however it doesn't detect 100% accurate but its close ...and for me ive used it on masters and fast feeds ..i feel it move faster however i like the steel better...but most that use ceramic will probably say the same that it can move faster
Depends on the motor type and clipper. It certainly does increase speeds on many setups. I always do before and after RPM tests when modifying clippers. Will never slow it down, but high chance to improve speeds slightly by around 5-10 percent in many of my test findings. Poor RPM apps don’t do the job. You need to buy an actual rpm laser tester to see it properly
I use fast feed at work with a ceramic blade. I don’t think the blade moves quicker. It might be smoother and stay cooler longer. after using the rpm app and watching the blade move, I still believe that particular machine is tuned and set at a certain rpm speed. Nothing will make the blade move faster, and if it does, it’s negligible. I think this myth came out of it moving faster back in the day before all these cheap rpm apps were available on phones. I’m going to call this one debunked.
@@joshuasuarez2370 it may increase the speed on other machines (vector motor) but on the fast feed it does not. I haven’t tested other clippers with ceramic blades to confirm or not.
@@ConcisetheBarber I put the fusion blade on my VGR v003....it has a nice crunch on the low speed 7000 rpms .....high speed 8-9000.......blades definitely are the difference
i only still keep my magic clips for the staggertooth. once JRL makes a staggertooth blade, the magic clips are out of my station
That’s would be interesting
Appreciate this content Og🙏🏽
you're welcome
Video so good I need to watch it again to really absorb the valuable information right now I use the jrl fade blade and I really love it
Dope Mike glad you like it
Best blades for me is the is the bablyliss OEM blade, babyliss taper blade, and oster fast feed blade.
Good all around wahl fade, jrl vapor and andis taper blade. (Don’t last long)
Every other blade either pulls or snags the skin, or just doesn’t as I like no matter how it’s adjusted.
Dope line up
In my experience with them all, the caper blade set is less forgiving when fading. Super intentional with how it cuts. Works different depending on the hair type
True also depends on the barbers how they use it
Most hated Wedge blade is missing my guy!!😆
lol true..its definitely not one of the most used...that a specialty blade same at the surgical blade
I love that blade.i Didn't at 1st.untill iI learned to cut with it
Crazy thing is it's 1 of my favorite blades.
@@desmondmitchell5602what tips do u have using it?
The black wedge blade goes through bulk just as good as any blade up there, plus it’s fades cleaner and closer, so I don’t understand why it’s not used as much. And it naturally lays flat on the scalp when blending and detailing. Most barbers think fade blades are the way to go when fading but don’t hold the blade flush to the scalp, instead they use the blade at a 45 degree angle which is wrong.
Thx u for sharing very informative 👍
You’re welcome
Nice!
Thanks!
Much needed🔥💈👑
Glad you enjoyed the video
Right to the point 🤙🏽
Thank you
I use a ceramic on my fast feed. Love that…
yea man dope combo
They do make ceramic stagger blades and i put cermic on my corded masters and yes it stays cooler longer.
You forgot about the wahl taper blade...1006
It really .. it’s a taper blade so I talked about that blade .. many companies have taper blades just showing the true differences to blades period
@@ConcisetheBarbergotcha
Faper blade on magic clip! Crazy great vid
Thank you 🙏🏾… glad you liked the vid
@@akronrc2827 Imma try the faper blade with the FF cutter on my MC
Which blade would he best for bread? I like no clip all the way to the top
what do you mean by no clip?
Faper or taper blade with magic staggered cutting blade even more forgiving?
Taper blade is more forgiving.
Got a link and code to buy them black fast feed blades and ceramic cutting blade?
Do trimmer blades next
Working on it
@@ConcisetheBarber thanks man 💪🏾 I’m looking forward to it
Anyone have experience with the mim blade? What I like or dont about it
Lets go!
thank you
There's a blue mim blade with 27 teeth. You should review that one
Yea I would like to try that one
Babyliss loves over releasing jeez... the 27 tooth doesn't come on the loprofxone I'm assuming?
@@Luke-wh9rulol nope
@@desmondmitchell5602 shady biz moves right there fr!
Rad content my guy, i love that babyliss blue blade. I use it on my Tpob goblins. It’s my go to for detailed fading. What are your thoughts on the wedge blade and the blade that comes on the TPOB Play? Respectfully
Will the stagger tooth Wahl cutting blade fit on the babyliss lopro fx with the MIM blade or the TPOB Play??
yes it should fit on the lopro
Switching the blades out to ceramic does not make the blade move faster. I tested this out with two corded fast feed clippers. I used the RPM app, Giri. Both machines ran at 3633.7 rpms. Unless I’m incorrect, I think the machine is capped at that rpm speed which would make the blade move at the same speed.
i have that rpm tester as well ...however it doesn't detect 100% accurate but its close ...and for me ive used it on masters and fast feeds ..i feel it move faster however i like the steel better...but most that use ceramic will probably say the same that it can move faster
@@valetudo025 there's less drag with ceramic tho
Depends on the motor type and clipper. It certainly does increase speeds on many setups. I always do before and after RPM tests when modifying clippers. Will never slow it down, but high chance to improve speeds slightly by around 5-10 percent in many of my test findings. Poor RPM apps don’t do the job. You need to buy an actual rpm laser tester to see it properly
I use fast feed at work with a ceramic blade. I don’t think the blade moves quicker. It might be smoother and stay cooler longer. after using the rpm app and watching the blade move, I still believe that particular machine is tuned and set at a certain rpm speed. Nothing will make the blade move faster, and if it does, it’s negligible. I think this myth came out of it moving faster back in the day before all these cheap rpm apps were available on phones. I’m going to call this one debunked.
@@joshuasuarez2370 it may increase the speed on other machines (vector motor) but on the fast feed it does not. I haven’t tested other clippers with ceramic blades to confirm or not.
If I need one good caliper just for styling the beard, do you recommend whal Magic Clip Gold ?
That’s not a bad one to pick plus its good pricing and I also have a discount with wahl at their direct site (concise15)
how about vgr-001/kemei 2796 fusion blade??can you review it??
yea one day when i get it
@@ConcisetheBarber okay bro..waiting for it👍👍👍🙏
🔥🔥🔥
Appreciate it
What clippers will the Wahl stagger tooth blade fit on???
its a good amount ..say the name of them and i can let you know
@@ConcisetheBarber instincts?
Which blade has that crunch factor
Andis and oster will always have the loudest sound to me
@@ConcisetheBarber I put the fusion blade on my VGR v003....it has a nice crunch on the low speed 7000 rpms .....high speed 8-9000.......blades definitely are the difference
Which trimmer for beard design and lines do you recommend, Babyliss Gold fx or saber?
Both are good really preference with that comparison
Do they both come with a dock ? Battery life etc etc .. like that time of stuff .. but performance is very comparable
@@ConcisetheBarber thanks man
noti ganggg