Try First: Easy FIX for Stuck Front Door Handle
Vložit
- čas přidán 11. 03. 2021
- The thumb latch / handle on my front door became very hard to press down. Check out how easy it is to repair this! Do NOT use WD-40. Use Silicon spray Amazon USA: amzn.to/38sSyHS
Amazon Canada: amzn.to/38tgSZX
Amazon UK: amzn.to/3l50lk4
If you need to replace the door handle, I appreciate if you use these links - it costs you nothing more, but sends a small commission to me when you make a purchase.
Amazon USA: amzn.to/2PVbXL5
Amazon Canada: amzn.to/38t70zI
Amazon UK: amzn.to/3bAhxLd
The kids could not even open the door.
Taking apart the handle only takes a screwdriver and a few minutes. With a little silcone spray, this door handle is working smoothly again and should last for many more years!
.353 - Jak na to + styl
Finally, a video I can show my landlord
You are one of the best videographers on CZcams. We are able to see everything perfectly.
Yes indeed, a fine video explanation of how the thumb latch mechanism works. Close inspection showed that my spring pin had slipped out on one end. In hindsight troubleshooting a half-working thumb latch pin issue is easy: there isn’t a consistent pressure (spring tension)when actuating the thumb latch. Now with the pin in place there is a constant ‘feel’, the thumb latch feels brand new. Excellent video.
So my door latch wouldn't fully release the latch, it would only come in 80%.
It looked exactly the same as yours but wasn't as worn.
I flipped it over the SPINDLE like you did, no changes
In my case the latch was crooked, your's wasn't...?
Upon better inspection the thumb latch lever (part that hits the CAM on the SPINDLE) rides on a pin with the spring, one side of the pin came out.
I used carb or brake cleaner to get rid of the grime and reassembled pounding the pin back in place.
I used a penetrate fluid similar to WD40 to lube it up and works great now.
I was going to go to Home Depot to buy a new one but thought I'd drink my coffee and spend 5mins at CZcams University and found your video.
YOUR VIDEO INSPIRED ME TO DO THIS AND I FIXED IT IN ABOUT 30mins!
THANKS!!! GREAT VIDEO
Now I can spend $50 on something else at home depot! LOL
Excellent video! Thorough without being too drawn out. Multiple camera angles and clean shots. Thanks for the how to, the lubricating worked for our door!
Glad it helped and thanks for the feedback!
@@TomahawkDIY What kind of lubrication would you recommend that has stay power, yet doesn't leak out of the handle?
For me just lubricating the mechanism worked. Thank you for the info.
I removed the door knob, which is on the inside, and lubricated it and it works like a butter. I didn't even have to remove the handle that is on the outside. Btw, I used white lithium grease (by Liquid Wrench) and works very well.
Thank you very much as your video really helped as I wouldn't even have thought that lubricating it would work.
It's simply impossible to think of a life without Google and CZcams is just amazing. :)
Saved me $100. Different mechanism, but was able to see some screws were loose. Tightened up and back in business. Now the kids can open the door
Oh my this is brilliant. I think the easiest way to see if this is your solution is if your inside handle gets stuck one way and not the other, this would be a very straight forward fix!
Great video. It took me longer to watch it than it did to actually fix my latch. That's how easy it was. Thank you!
Glad it helped!
Hi Mike! Thank you so much for this video. I was able to use my dremel to slightly smooth out an internal worn area in my door handle. For now, it works perfectly. Your suggestion saved me probably north of $175 to replace the whole thing! Kudos!
Fantastic! Glad it helped you saved $$$
Simple. Straight forward. Great camera angle.
Thanks for the feedback 😊
thank you , very helpful
excellent video and explanation - you gave me the confidence to try to fix my door handle myself, and I did it! Thank you!
Wow! Great job!
You're welcome, thanks for watching!
Bea-u-ti-fully and clearly produced video!!!! OMG! Wish they were all so well done & explained.
Wow, thank you!
Thank you so much! I had this exact problem and your video was so good that I was able to fix it myself! It was very simple, just as you said. Thank you!
Excellent!
The wd-40 silicone did the trick and I didn't have to take apart the latch. Thanks for the idea of using it
This is very useful
The inside knob worked great but I was having a lot of trouble with the outside handle. I didn't have a clue of how to approach it until watching y0our video. Turns out my metal pieces weren't worn so I just took the mechanism apart and lubed the heck out of any of the movable pieces. Works like a charm now. Thanks for showing the way!
Looks good! Easy fix when you can access the inside of the door. I have one that is keeping us locked out....gotta work that penetrant in from the outside.
wow so glad I found this video, I'm going to take apart my latch right now and hopefully it's the same or just as easy to fix issue! thank you!
Hope it works for you!
Thank you so much!! I'm not handy at all. I greatly appreciate the basic terms you use. Now I can do this myself. 💪
You're so welcome!
This is perfect! Thank you!
You're so welcome!
You just saved me $100, thanks so much !
Glad I could help!
Great video. Thanks v much
Thanks. Helped a bunch.
You're welcome!
Fantastic ! I have this exact problem and now, thanks to you, I know how to fix it !
Subscribed ! 👍🏻
Awesome, thank you!
@@TomahawkDIY I wanted to follow up to say that after watching your video I followed the same steps and FIXED my door handle. I sprayed the parts with silicone lube before putting everything back together and now it works like new ! I can’t thank you enough. Kudos, Sir.
Thank you. This fixed mine and saved me the $ and trip to the store.
Excellent!
Thank you Sir. You just saved me $50!
Glad I could help!
Thank you 🙏🏽
If you don’t have this style door handle like me. I fixed mine by replacing the latch with another door latch from in my house and now both work great with no issues
I don’t know if it was the spindle being turned or the lubrication, but this worked. Thank you!
That's awesome. Glad to help
Outstanding
Very cool Thx
Hi there, thanks for this video. Gives me some idea, however, my doorlatch will not turn, so it will not let me open my front door. I took off the internal knob, but still cannot get it to open. Do I have to remove the external latch as well? I dont see a screw outside to remove it
TIA for your help
Nice work bud
Thanks for the visit
Thanks Brother! Happy New Year..
You're welcome! May you have a prosperous New Year!
Thanks for the video - went into my latch and found that my flange was a little worn, also, but the bigger issue was the the pin had slipped out of the hinge for the thumb button, causing it to articulate off-center.
Re-aligned, lubed up, and put back together, and door latch works great.
This happened to me too. The tiny pin infront of the thumb plate came out. Can the pin be put back in to make it work without buying new parts? Who can help?
Thank you.
You're welcome!
Now, did you mean the three screws that you already took out or three screws that you didn’t show?
Hello. our thumb latch / handle fell off, we have exact same handle. Do you think it's broken and I should purchase a new handle? Please help me out. Thank you.
It worked!
Good job!
You saved me !!
Glad I could help
So it doesn't mater which side that half moon piece is on ? I bought a new lock mechanism and now it only opens when I lift up on it. (the kind of handle that looks like a flat letter s. I've taken it to the lock smith twice but there recomendations didn't work.
My problem is different. It depresses easily enough, but won't spring back. much like the later problem. But it's not lube, it's very easy to move. Just no spring action. But it's ok from the knob side.
Thanks for a nice video ! My latch sticks and doesn't come out all the way. I would have thought you would have lubricated everything first. Why is WD-40 not advised ? I will try with Silicon Spray today ! :)
Hope it works for you! Thanks for watching
@@TomahawkDIY Thanks, I took out the lock pieces and sprayed with silicone and everything was loose. The problem was that the latch head doesn't come out far enough ( only half way ) and I don't see how to adjust it. So, I removed the plate which the latch head goes into and made it come out an 1/8" to have a little better contact with the latch head. I don't like it but better than buying a whole new lock. I don't know if the latch head piece can be replaced ?
Great video. I had the same problem, where it was hard to press down, but not for the same reason.
I put the hardware together so I would see how it functions and discovered that the bottom screw for the inside knob, if over tightened, interrupted the function of the handle, preventing the handle from completing the cycle of turning the latch.
In addition, while removing the inside knob, I discovered a small piece of plastic that I could not figure out where it belong. So I left it out. Maybe it was from a previous installation.
That's awesome! Thanks for watching
Thanks for the tip, saved me $150 to replace a new one. Hopefully it will last me another 10 years.
Great to hear!
A dab of grease at the contact point would reduce friction and wear.
Ok I have high hopes for this video...hopefully it solves the same problem I'm having. Ok, gonna watch it. Stay tuned for the results....
Hope it works for you
Silicon spray attracts dust. Why not use graphite? I would rub some pencil lead on it or get some graphite powder.
Can I use wd40
So, couldn't you just have sprayed silicone lubricant the first time and that would have unstuck the whole mechanism?
Well well looks like I found my problem
🙏👏👏👏
What do you do when it completely falls out of place and won’t even open the door
Call a locksmith lol
Please show how to add extra keys and program in Hyundai i20 cars without programming tools.
Demonic thumbnail
replace the whole front door wtf. chill out