I have a gen 4, and i live in Mexico, in which all cars are left hand driven, so, if i order this armrest, how can i specify that i want the brackets and all that stuff to be fitted properly in the correct seat? Thanks.
Can the seat covers be removed all together? I would like to re-upholster the seats but keep the current seats in the event I sell the car in the future.
I hear the arm rest will strike the gear stick when seat is slid forward. What happens when I'm in neutral and someone slides the passenger seat forward to enter/exit rear seats? Also, it looks like it could rub against my wrist when changing gears. Any thoughts on these ?
Being a proper fitment as used by manufacturers, it simply flicks up out of the way. It doesn't get in the way of the gears when using them. You do have to reach around it to use the handbrake which takes about a week to get used to. I am just under 6ft tall.
@@bigjimny Thanks. My concern is that a passenger may not think about lifting arm rest before sliding the seat. Or other less regular drivers in the family
Can't really tell from the video, does the arm reat block access to the two cup holders? Also I'm in South Africa and there is a HUGE Jimny following over here, would you consider shipping to South Africa?
@@ksazubbie hi. It depends on the length of your leg as this determines where the seat back is inside the car. I am 5ft 11in and means the rear cup holder is accessible and the front cup holder can hold a short height cup of the arm is raised to put the cup in.
Picked this up from Martin yesterday. Video was invaluable in helping me with the fitting.
Very happy with armrest, and Martins professional approach.
Just fitted armrest 20mins. leave the back seat cloth in place just open the zip, easy Great product.
"armrest-systems" make them they are located in Sweden the models are the "ML285 double kit" and
"MLC310 with box".
Thank you. Very informative video. Keep it up!
Hi, where did you buy your armrest? Can you please submit a link? The link above is not functional.
Great addition, thank u for the video
That was great thank you
very good vidéo.
Can you still lay the chair flat without the armrest hitting the cup holders???
Where dose the power for the Qi charger come from? Thanks
Great product - would this work for a 2017 Jimmy? Cheers
It is available for the Gen3, I simply shop a different adaptor in the kit
When will the DUAL ones be available again on your website sir ??
Thank you
All should be back in stock shortly as large order is arriving
How can I make an order to Israel? Great product and a very informative video
הצלחתה להזמין?
I have a gen 4, and i live in Mexico, in which all cars are left hand driven, so, if i order this armrest, how can i specify that i want the brackets and all that stuff to be fitted properly in the correct seat?
Thanks.
Just add the EU Armrest adaptor (free of charge) and I swap it over.
Hello, where can I buy this armrest? The link isn't working. Thanks
Hi where can i get these armrest
Thanks
Can the seat covers be removed all together? I would like to re-upholster the seats but keep the current seats in the event I sell the car in the future.
I am not sure but it looks like the seat back covers can be removed, there is an airbag in there
I don’t want to cut the OEM fabric just for armrest, the cost for the OEM fabric would be higher than armrest
I hear the arm rest will strike the gear stick when seat is slid forward. What happens when I'm in neutral and someone slides the passenger seat forward to enter/exit rear seats?
Also, it looks like it could rub against my wrist when changing gears.
Any thoughts on these ?
Being a proper fitment as used by manufacturers, it simply flicks up out of the way. It doesn't get in the way of the gears when using them. You do have to reach around it to use the handbrake which takes about a week to get used to. I am just under 6ft tall.
@@bigjimny Thanks. My concern is that a passenger may not think about lifting arm rest before sliding the seat. Or other less regular drivers in the family
@@sbird7251 the box version is only fitted to the drivers side so you can slide the passenger seat as much as you like
what if you want to attach it to the other seat?
I have both right hand and left hand adaptors in stock, it simply fits either way around
Very nice, how to order? Shipped to Philippines 2021 jimny
Order from my website www.bigjimny.com/store
Will this kit fit 2021 model laft side driver?
Yes
I have sent an email regarding the dual armrest for the Gen4 Jimny.....I got no answer yet...any other means of communication???
Thank you
Hi, not sure where your email went, can you either send again it ask your question here?
@@bigjimny Good day
I am interested in a Dual Armrest (ML285) set for my 2020 Gen4 Jimny
Thank you
King Regards
George
@@tigrarulez hi, I buy the armrests in batches. I am getting close to ordering another batch. Martin
what size lift and tires? 🤚
2 inch lift and 215/75/R15 tyres
tried to buy, but did not ship to sweden according to web page.
Yes, I have not got the website to calculate it yet. I have sent out EU ones, it costs £18 postage
@@bigjimny ok, thank you
Quick reply !
Can't really tell from the video, does the arm reat block access to the two cup holders? Also I'm in South Africa and there is a HUGE Jimny following over here, would you consider shipping to South Africa?
@@ksazubbie hi. It depends on the length of your leg as this determines where the seat back is inside the car. I am 5ft 11in and means the rear cup holder is accessible and the front cup holder can hold a short height cup of the arm is raised to put the cup in.
And I will ship to SA
can you use these on a commercial ?
Yes
Я такой бы купил но в России его нет
So you are sending to Afghanistan and not to Israel? Seriously?
Afghanistan??