Awesome video (as always), I have the Milwaukee setup but it was awesome to see your set up! Loved seeing inside your boxes and seeing what you carry. Wish you showed how you load and transport your stack. As always, thanks for sharing!
they have since updated the yellow tstak latching clips that used to be 100% plastic. I ended up replacing my dolly with a toughsystem 1.0 latching clips which are 100% compatible with TSTAK. They also modified some of the TSTAKs to some degree. The clear top unfortunately hasn't received any updates yet as far as making more water resistant. You are probably wondering what is so good about the TSTAK when compared to Packout. Well, it's the compact size and it doesn't take much space in your working vehicle. The only downside is fitting some of the bigger tools in it. If I were Milwaukee, I would highly think about making a compact system by starting with that compact tool box 48-22-8422 and make a half size dolly or....create a compact packout that is designed to sit/latch in the middle of the current dolly
Does the thoughtsysteme 2.0 fit on the trolley? Looking to put the 2.0 drawers with a box 2.0 on top on this trolley and i want to know if it’s possible
Buen video mostrando las cajas con accesorios realmente se da uno la idea del funcionamiento al manipular cada caja y muchos vídeos solo muestran las cajas vacías 👍🏻
Thanks for review, I'm looking for portable, in and out of truck and apartments. How does it go down couple of steps and to your truck?? I'm looking at the drawers to make it easy access. I have the Rigid system, the drawers are too heavy, as is Mikwaukee.
I like your channel very much, and have many of the same tools.you use. With that being said, I run the Milwaukee Pack Out system, and I know it has the same problem that your new DeWalt system has. All our "stuff" falls over in the van. So we spend time unpacking from the van, stacking and then inside unstacking. It's not really a savings. Sorry brother. It is cool, and would be great in a commercial setting. But for residential, neither systems are worth it. Again, I have one of them, and see no time savings.
To access my drill, I have to remove all the upper layers and find space to place those boxes in small limited space locations. It seems like a cumbersome process?😮
That was an awesome setup. Thanks for the review, tips and tricks! Keep up the great work and stay safe bro!.
Always got it together!! 👍
Thanks brother u are fantastic God bless you
As always another great video
La mejor explicación en CZcams.
Awesome video bro I think I’ll stick with my pack out especially since they have the really big box to stack on now
Love it😎🛠️😎🛠️😎
Awesome video (as always), I have the Milwaukee setup but it was awesome to see your set up! Loved seeing inside your boxes and seeing what you carry. Wish you showed how you load and transport your stack. As always, thanks for sharing!
Appreciate it brother, more to come! 👊
Op demais meu brother!
they have since updated the yellow tstak latching clips that used to be 100% plastic. I ended up replacing my dolly with a toughsystem 1.0 latching clips which are 100% compatible with TSTAK. They also modified some of the TSTAKs to some degree. The clear top unfortunately hasn't received any updates yet as far as making more water resistant. You are probably wondering what is so good about the TSTAK when compared to Packout. Well, it's the compact size and it doesn't take much space in your working vehicle. The only downside is fitting some of the bigger tools in it. If I were Milwaukee, I would highly think about making a compact system by starting with that compact tool box 48-22-8422 and make a half size dolly or....create a compact packout that is designed to sit/latch in the middle of the current dolly
Love the Tstak. I wish they would bring Tstak 2.0 to NA.
Gas for all u do for us the workers
Nice vid man , do you have a vid , how to do a waterproof shower floor?
Thanks fking L so many videos only your make sense cheers mate
What model is that first clear lid organizer? I've never seen them with the 2 long side containers.
Does the thoughtsysteme 2.0 fit on the trolley? Looking to put the 2.0 drawers with a box 2.0 on top on this trolley and i want to know if it’s possible
I wonder if this dolly could be set up/rigged for a packout set up.?
What other trollys are compatible with tstak besides tough system?
mis respetos para tu buen carisma hermano. Dios te bendiga quisiera darte mil likes pero no puedo así que Dios te bendiga.🙏🏻
💪💪💪
👍
From where can buy this please
Great video! Can you use it like a movers Dolley, How does it roll on dirt and grass? Can you lift up the front and roll? Is it strong enough?
yes, yes and yes! has a kick plate to prop up the front wheels when needed. I've placed 300 lbs of thinset and tile on it with no problems.
Buen video mostrando las cajas con accesorios realmente se da uno la idea del funcionamiento al manipular cada caja y muchos vídeos solo muestran las cajas vacías 👍🏻
Thanks for review, I'm looking for portable, in and out of truck and apartments. How does it go down couple of steps and to your truck?? I'm looking at the drawers to make it easy access. I have the Rigid system, the drawers are too heavy, as is Mikwaukee.
Goes up and down easy, has a "peddle" to kick up the front wheels also.
I like your channel very much, and have many of the same tools.you use. With that being said, I run the Milwaukee Pack Out system, and I know it has the same problem that your new DeWalt system has. All our "stuff" falls over in the van. So we spend time unpacking from the van, stacking and then inside unstacking. It's not really a savings. Sorry brother. It is cool, and would be great in a commercial setting. But for residential, neither systems are worth it. Again, I have one of them, and see no time savings.
T-Shirt Link Please? "Dirty Hands"
To access my drill, I have to remove all the upper layers and find space to place those boxes in small limited space locations. It seems like a cumbersome process?😮
I agree with you
Where did you get that laser pole from bro
Hey Tako happy new year brother! 👊 that's a laser pole by Johnson, but they now make better cheaper ones you can get on amazon 👊
@@LandbergTileTV HNY Braddah
Still the biggest Fan. Your work is always cherry
It looks cheap compared to the Milwaukee one.
I mean, no shit, it's like a quarter of the price.