I've been having the crappiest couple of months at work, being beat up by cars and stuck with crappy jobs, developing bad habits and bad attitude. This is definitely a wake up call. I remember just a handful of years ago when I'd give up anything to be a mechanic. Some days when the job gets real tough, it's easy to forget how much I do enjoy working on cars. Thank you for the wake up call and all your amazing videos. I'm also a VW specialist so I can really relate to what you're saying
So after 16 hours in the shop as a lube tech/automotive apprentice I can honestly say that your advice is spot on. I got stuck between tasks that can be done because I had already checked the trash, swept my bay, made sure my fluids were stocked, checked on the mechanics, etc. Finally one of the master techs was like you can go pump used oil into the oil furnace tank, or go clean behind the tire machine. Then he said the drive area can always be sprayed down and dried because we are bringing cars in all the time, customers occasionally come back, and so we do what we can to try and keep the shop clean. Great advice, thanks for all of the information.
Thanks for the advice. I just started my apprenticeship today at Subaru STi and I definitely look at it as my dream job. It took me awhile though I'm 24 and you could say I wasted 6 years of my life in college and hospitality with no degree. I think if I had started when I left high school the passion would have faded very quickly Having to work long hours and battling to hold several part time jobs has taught me to appreciate this job. We have the best Subaru technician in the world with us and I will do my best to soak up as much knowledge from him as I can.
Hell yeah bro I just turned 26 got an apprentice job at a local owned shop on the other end of town but I'm loving every minute of it. Took me forever to get my foot in the door anywhere with no exp. and no degree.
great video mate. I'm 29 and starting an apprentice on the 16th Oct. i always wanted to work on cars but never got to it till now. hardly new anything about cars till start of this year but quite nervous about my first day.
I'm 27 and I'm starting in September, I have been really worrying about how its going to be starting 10 years later than everyone else who started as teenagers. How did it work out for you?
@@darranmilligan9733 Don't worry about it too much! I know you weren't asking me but the best advice I can give is to focus on self improvement. Try not to compare yourself to others especially when it comes to speed. Speed comes with experience and it's really easy to compare yourself to other techs that have a lot more experience. Just focus on how you can improve and don't get overwhelmed with everything you need to learn. I still have a lot to learn and I'm always trying to expand my knowledge. This is an experience based industry so don't feel bad about not knowing everything when you're starting out. The longer you do it the easier it will get. Good luck with the new job!
i have watched this video like 30 times.. love your videos. i am almost done with tech school here in GA. and i have my first interview with a jag dealership tomorrow. I don't have a lot of experience with cars but if work is needed to be done on my own vehicle i try to do it myself.. small things. but anyway just super nervous about jumping into a new career and watching your videos just makes me feel better about my choices. great work friend. wish me luck.
I wanna be an apprentice for the steamfitters local 602. I fear that I will be young compared to everyone else and they would work faster then me :/ College isn't for me
Yup, the pace experienced guys are showing may be quite taunting at first. It's even hard to follow it all. But being slower is nothing to be ashamed of. When you've been working at you new place for a while, you may want to try and be quick on your own vehicle at first when it needs some jobs to be done. Helps at the shop as well.
I'm in my third week of a light vehicle tech apprenticeship with Honda and I've already started to venture into third year processes and ideas. I've also managed to come up with a question that has genuinely stumped every techie in the workshop XD
Great Video!!! I became a Nissan apprentice in December. I pretty much did everything you are saying and still do. I did my first timing chain job on a Frontier this last Friday and did it successfully of course with asking questions when need be and taking breaks when i needed because i was getting a little overwhelmed. I started as a lube tech in Oct. of 13 and knew right away i wasn't doing that for very long. Anytime I had free time from being a lube tech i went and worked with the techs. I pretty much started doing oil changes, tires, any kind of easy job i could do for them then started doing brakes, PDIs, flushes and anything else they would let me do. I finished tech school in Aug of 14. Then finished up any certifications for Nissan for warranty work, piled on a few ASEs and continued to prove myself to the Techs and supervisors that i could be trusted to move up to an apprentice position until I finally became one. Since then i have done a dozens CVTs and a slew of other "hard" jobs. Also grow thick skin you are going to get the hazing of your life. I'm sure its all in good fun.... I think LOL. And a lot of "your not done with that yet?"
I'm just finishing up my first year in auto tech and got one more year to go. I've been at my Chevy dealership 6 months now and already am one month into my apprenticeship. When I first started there I was a lube tech, and I was part time compared to the 2 full time lube techs, so I tended to have a bit of free time. So I would just walk around and see what everyone was working on. They'd usually let me help out or at least watch. I got lucky because one of the master techs that usually never likes having an apprentice grew fond of me and offered to take me under his wing and mentor me. He's the guy everyone goes to when they have a question or concern, so I'm being trained by one of the best. I try my best to work hard to show him that I'm worth all the time and effort he's put in.
Great video Charles, this absolutely applies to all kinds of positions. Right now I'm in college (accounting) and have been fortunate to get internship experience, and everything you said here works in my field too. Learn everything you can, be willing to try different projects, maybe something you aren't sure on or have never done before, etc. My internships have had more than their fair share of boring work but having the right attitude makes everything better and I've been able to learn so much. Learn, hustle, and have the right attitude.
This is my first time watching your video, and I can honestly say that I 'being a mechanic/technician apprentice' have done all of those steps and I had walked in knowing anything about cars to being a tech on gm, ford, dodge, audi, bmw ect.. from that now going to a bmw dealer is a great way, plus you meant many mentors friends and s lot of opportunities with having an open mind and wanting to keep learning. Like I said even though I saw this video a little later I would like to thank you for speaking out and sharing your knowledge, trust me it works!
thank you for this video I am in school for automotive technology at the moment. I also plan on going back to college after I get a job as a auto tech for auto mechanics. unfortunately the school I am at stopped funding engines and transmission repairs. but I have a really great instructor if I need help he's there in seconds and he always stresses on safety. I really enjoy your videos keep up the great work
Awesome video!! I think it's so important to have ENTHUSIAM! Just like you said, that's the main thing that got me my job. When I had free time in sales, I jumped in the shop. I was willing and eager to learn everything I possibly could. Also, admit what you don't know. It shows a willingness to learn, and shows you're not going to make a mistake just because of your ego. It shows you're genuine, and people trust you more. Also, show passion. Be excited! Be eager! When people see my excitement, they're more willing to help me. I've gotten sone awesome training from people who just liked my eagerness. And always be busy! There's ALWAYS something you can do! Ask questions, solve problems as much as possible before you're even asked to. Constantly watch, learn, anticipate the next step watch CZcams videos to learn more, read books, anything you can to learn. It shows when you're in the shop. And also, don't pretend to know everything. When I admit I don't know something, people are willing to teach me, because I'm honest. Be humble!
Thanks for the video is a very inspiring message to me. I'm a person that's interested in the automotive industry a the message is very clear.Thank you Mr. Humble mechanic.
I work at a small independent euro repair facility as a shop assistant and I think one of the big things is to have an open mind. We have a MB master tech, a VW master tech, and a domestic, Asian based master tech. They each have very different approaches to diagnostics but they all produce well so its worth it to take note of the tools used often and try to be as helpful as you can in their diagnostic process. Transitioning from a SO Verus to Autologic and Vag-com has also been a great learning experience.
There are definitely two types of apprentice - those who are into it, and those who just have no "gumption" at all. They have to be pro-active (or hussle), and show initiative - I didn't mind being asked for help if they're not sure or they needed something checked, but it does bug when they don't think things through when with a little bit of thought they could have easily come up with an answer themselves (I mean when they do it consistently), or at least not try. It's a balancing act as well, at first they need to be doing stuff, and asking questions, but not to the point where they wear you out with it. I don't expect them to always be off doing something either, sometimes they need to watch what you're doing - I guess it's a bit like the the "monkey see, monkey do" thing, they need to see how it's done first, before doing it themselves and eventually learn why along the way.
Im in grade 11 and im in my 3rd year of automotive but my last year really set my mind towards being a technician so next semester im have a coop that i am hopefully taking some sort of automotive for but your videos have really helped me learn more about the mindest and things to know going into this environment then my autoshop teachers could of taught me, so i say thank you
getting back into my trade again, Very hard very stressful but I love watching this video over & over just to get my self of steam back up. Went to so many shops were I was just being called Stupid. Never a good feeling (even worse when you start believing them). I hope this next job will be different & I hope I can be a good Apprentice for the shop. thanks again for this video
You mind sharing your experience? I’m about to start my very 1st apprenticeship here in central Cali as a 43 yr old nursing graduate. I love cars to care more than actual people but of course don’t get me wrong I still love people 😅
Huge thanks for the advice. I start an apprenticeship on Tuesday at a Subaru dealer and i’m super nervous for the first day. Had 2 years shop experience at my high school and looking forward to tech school in the fall. Thanks!
@Humblemechanic I just wanted to publicly say thank you for your podcasts and the work you put into it to make it what it is. I am looking to give her a go, as it were, and make a career change. Everything has been very informative and helpful to being able to navigate the start up process.
I am looking to start out at a shop apprentice, and a great way to determine what tools you need is go to several different colleges/tech schools that have automotive programs and ask to see a required tool list. You can also contact the sales reps from Snap-On, Mac, Matco etc. that service that area. Requesting a tool list that the college requires. doesn't necessarily mean buying from the sales rep. But there are ways to find out what you need without taking time out of your shop forman or journeyman mechanics day to explain what tools you need, why you need this specific tool, etc. CZcams also has instructional videos on how to use tools correctly. So that way your tool lending program doesn't come to a crashing halt when your mechanic sees you using their 50.00 screwdriver to pry out a nail or what have you.
awesome video, makes me motivated to go back to my old apprenticeship. i thought i just wasn't good enough at it but i check almost every other box for a good apprentice. thanks a lot man this video was inspiring.
Charles great insight, that positive reinforcement and leading people into becoming leaders themselves Is good. I found the author John Maxwell has helped me develop my people into better leaders who eventually lead themselves and help carry the load instead of burden their leader. Thanks for this vid !
I started from the bottom in detail working my way up. Leaving behind 10 years as a butcher with Wholefoods Market to follow my dream. I've been a apprentice for three months now. Have two of my eight certification done need more classes for the rest. Have a key to my mentor's box never used it. Have more tools than most of the other tech's already. I'm hourly so five days a week I'm there 7-6. Giving it my all to one day be a Certified Master Subaru technician! Love the channel and thanks for all the advice.
Hi Charles, Great video! What I think makes a great apprentice is attitude as you have spoken about. You can teach a mechanic skills and how to fix a vehicle if they have the right attitude. The best apprentices make your life easier, they are helpful but dont get in the way. They think ahead about what might be needed next. There is nothing better than getting up to the next stage of the job and your apprentice has gone and got the equipment you need and has everything ready for you.
This really set things pretty concrete for me. What I mean is that, based on what I've been doing in the last few weeks in GM's Apprenticeship program, it's made me feel a lot better about myself. I always ask questions, I try to learn every little detail from our senior tech when he's working, he allows me to do stuff and be hands-on, he makes sure that I don't go in over my head. Within the first 2 weeks of my apprenticeship, I was doing a 12.6hr engine rebuild practically by myself. (And I finished that job in 11hrs!) However, because where I work at is such a small dealership and our senior tech is extremely old school, it does make me feel like I'm missing out on good education. If anything, what I do take away from all of it is what others do and don't do, learning from their mistakes, and watching what the master tech does and learning from anything he does when I can. I think the best part is that despite having to deal with a rather hostile work environment due to lack of communication (which has gotten better) and a general manager with a fire-happy way of life, I've been able to impress everyone with the skills I've brought to the table and things I've learned thus far, and I've really only been in the automotive technician (lube tech) world for a few months. I can only push myself to be better. I just hope things either improve or I can find away to move to a better store that will allow me learn much more and work on higher-end vehicles in the brand.
Here's the thing about being a good apprentice. You're number one thing you do not want to do is walk into the shop thinking you're the next best tech because will be put in you're place real quick. Until you're mentor can figure you out and what you can and can't do you will be doing the little jobs like getting oil filters, handing tools to techs etc. When a person like Charles asks you to do something like change oil by you're self for instance while he is across the shop and you don't feel conferrable just say so we would rather do it than have you mess it up by thinking you know. And I think the most important is there is no stupid question we all have made it in this trade by asking questions.
Just got a hell of an opportunity @ 29 yrs old as an apprentice mechanic at a Chevy dealer with very minimal experience. I’m so willing to hustle and excited to learn all this knowledge. Just hope I can do a great job. Thanks for the inspiration Im hoping my good mindset will carry me to success and make up for my minimal experience
Thanks brother . I’m about to start my very 1st apprenticeship today at this independent licensed shop here in central cali. I was referred from an aspiring mobile mechanic I spoken to. I figured independent shop can have more pros than cons when it comes to servicing variety of car repairs and diagnostics compared to a particular dealer out there. I’m 43 yrs old and have some work experience on my backbone. I have a bachelor nursing degree from Philippines but the concept of becoming an RN is just not for me. Regardless I learned a great deal of PATIENCE which I can truly apply to become an ASE tech here in Cali. UTI by the way tuition is $40K compared to an online I enrolled $999 but CON is with no hands on as part of their program. Affordability is a must for me haha. Anyway…after watching this vid …to prep yourself mentally on the reality is essential at every detail aspect of becoming a PRO. Your tips is 1st class exceptional! 😊
I'm fixing to graduate lincoln tech in grand praire texas.i was gonna start my own business but now that I'm on my last 2 weeks I have decided to wait until I have a few years under my belt at a dealership or shop before I do that cause knowin my luck somethin bad would happen.this video has help give me confidence heading into this new world of car mechanics
Great video!! I just started a new job this week working in a Indy shop after working in a GM dealer for the last 12 years. A lot of what you said also applies to a journeyman starting in a new shop.
Qualified Vloger Thanks! They are very similar, and share a lot of similar parts. I hear MB is a great company and takes really good care of their techs
those are cool shades!. on another note, being a brand tech in the US looks like a solid career, over here it doesn't exists and the handful of "stealerships" are known to be crooked(always try to sell you severely overpriced stuff) with very substandard work and tales of horrors from former tech working there
I got screwed on a couple euro cars by torquing spark plugs… fords I will torque every time, otherwise you build that muscle memory of what the proper tightness is and what will keep the plug in the engine.
I have worked as an Audio Engineer for 8 years but I have been really thinking about changing careers. Since I have been building cars as a hobby (2 BMW's and 3 VW's) I have been thinking about applying at a dealership and starting from the bottom and working my way up. Some possible cons: I know I like to work in my own rhythm. I know I get really frustrated as an enthusiast when I don't have the right tool for the job. I'm not sure if i could work on other people's cars since I won't be able to enjoy the work I've done first hand and people's neglect for their cars would bring me down. Lastly, I don't have the cleanest driving record. Some pros: My rhythm is pretty fast. I care more about the job being done correctly than just getting it done. I seem to have a bit of a talent for diagnosing issues. I see it as making money doing a hobby I love. Do you think its something that I should possibly pursue or should I keep it as a hobby?
I’m not the humble mechanic but I can relate to how u feel and where u coming from…I think imo that it goes more deeper than a hobby …it’s something that you truly have passion for it…like the story of athletes such as Kobe MJ and Tom Brady…they have that hunger to win 😊
@@leetos.4915 lol wow! 8 years ago. Still working in the AVL industry. I have sold all my euro cars at this point and have since gotten into bikes as a hobby. 70’s era choppers and new Harleys. Way easier to move around and a different kind of fun.
great video I think the most important thing is having a really great attitude and a willingness to do the Dirty Jobs nobody else wants to do absolutely key I work in the heavy truck feild and love it out your work in and you will make it
That buying tools thing must be really frustrating! In Germany the shop owns the tools, isn't that the better system? Saves you so much money and frustration! 🤔
Sebastian Eschenbach I like the freedom of owning my tools and my toolbox. You find yourself out of work you have everything to make money in your possession
the tech he is describing is far and few between. a lot of the new kids have an entitled mentality witch needs to be conquered before they can start working in auto repair. UTI sells a romantic image of auto repair and when the reality sets in and the kid lands the job at say "Toyota of South Carolina" and they have to sweep the floor or bust tires they get a bad attitude.
Again great video, one thing I wanted to point out is you always mention that you torque spark plugs. I always that was overkill, until you told your story in this video of how one guy did not and the car got towed back with the threads stripped out of the head. So it can be important for you as a trainer to tell your apprentices why, or a story behind why you do things a certain way instead of just saying do it this way. It may take a minute or two longer but how much time will they save in the long run if they do it right the first time, every time. Also important to note if you are an apprentice and you don't understand why someone is doing something a certain way or taking extra steps ask why or ask is there a story behind why you do it that way?
I am trying to change career and am starting my first work trial tomorrow. I have no experience (coming from a completely different industry) but will follow your advice and hope for a positive outcome.. At least I won’t have to fake wanting to be there, I genuinely want to be there and want to learn and have been counting the days till I start.
I work as a Porter at a Chevy dealer and everyone is cool there, the electrical tech says if I finish Electrical I *which I'm taking now* and Eletrical II he will see what he can do about me being his apprentice.
Could you possibly make a video on how to land a job as a apprentice? and where are the best places to apply to Im going to be taking automotive in a few months for high school and learn the basics then try and get in a company
Listening skills are so important for an apprentice. I think you have to accept that you really don't know much of anything when you start out. A lot of techs will offer advice to those who listen to it and apply it. Also, like someone else said, having thick skin is important. You are going to mess up. Learn from it and try not to dwell on it.
I was doing the wiring harnesses and turbo charger recall on the civic type R, working with the master tech. I start on the bottom of their car unplugging the harness and then I get to the starter. Should have know not to touch it but I did anyways and what do you know, I broke the starter. Not only did I touch something I shouldn’t have but I broke it. At the end of the day it wasn’t a big deal we got it replaced and the car rolled out no one was mad. But touching stuff you shouldn’t is a good point and asking questions is always the right thing to do.
I start as an apprentice at Volvo truck & bus in a couple of weeks as a third year apprentice as I’ve already completed two years at my current place. Wish me luck!
your videos are awesome and have helped me a lot in general i cant explain how much this one confirms my getting out of the army. i love to work and here when were not deployed we sit in an office with a thumb up our ass. budget too small to get parts.... and im sitting there after 4 years of being a diesel mechanic, doing nothing to better myself or the equipment; sweep the floor or just sit there on my phone because im replaceable. Im so done with this. Id rather go to school (thanks to the army money which is an awesome benefit) and work toward something i actually love doing.
hi i have been doing my apprenticeship in the UK for honda now for 2 years (total is 3) i like to be really interested in what my mentor is telling me, and at every opportunity learining something new! this video has really given me insentive to keep it up thanks!!
Can you please do a video on a fix to the infamous CEL "bank 1 sensor 2" on the MK6 GLI/GTI when installing aftermarket catalytic converter and test/downpipes?
First of all I just want to say nice beard 👍 I am 17 and I have had a two day trial In a garage. This is one of my first videos I have seen of yours. I will be watching many, many more. Thank you for all the kind words you have said in this video. Keep up the videos. I have a lot to catch up on. 😁
+HumbleMechanic Thank you, iv seen quite a lot of your videos now. you are not boring and I can easily sit through a 20 minute video. so fascinating. 😀 🚗💨
+HumbleMechanic This is fantastic advice, as an apprentice myself (Currently Furniture Making, different industry altogether) this is spot on what I try to do every day. To get the most out of our training, we need to be good apprentices, but also need a good trainer.. like you. I would be honoured to be the Apprentice of someone with your additude.
Excellent video, I just got my Associate Degree in Automotive Technician at my local community college and I have applied to a few places, the most recent being a Cadillac Dealership any tips on how I should prepare myself? I have basic tools and have completed repairs on my 2007 Buick Lacrosse such as, sway bar, sway bar links, inner tie rods, wheel bearing, and brake jobs. I also wired and replaced a blower motor resistor that failed. Don't have too much experience anywhere else in vehicles.
I am a current bicycle mechanic, my shops head and master mechanic. I learn best with my hands and am quite mechanically inclined. Made a mistake of going to college and getting four year degree and no solid job after. Mechanics i feel is still my calling. What advice would you tell a mid 20s year old? start a path to be a journeyman? ASE certification? go back to school or a local JC that offers a trade program? Im doing ok now but know I want to do more.
what does it take to get a job in a dealer... i am pretty knowledgeable and love vw what should my steps be in becoming a tech... thanks for your time love the vids
+billy craven yep, be honest about what you know and what you don't. It may not be as hard as you think. Especially if they have a service express program. That is a great place to start.
I really want to love cars again I got a apprenticeship soon I'm only in it for the money now, but I forgot why I chose this career in the first place got any advice I'm 17 BTW
I just landed an apprenticeship about to start June 6th little nervous been wanting to do this my whole life now that I have the chance I wanna give it everything I have to be a certified technician any advice would be awesome 😁✊✊
I've been ASE certified for close to 20yrs. Lately my last batch of apprentices has been dismal. Failing simple entry level ASE exams. I have one now who has a bit of hope but he's got this "I need to be the hero" attitude and with ease throws you under the bus to the service manager when you don't teach him something cuz you're busy. He also gets "friendly" with parts guys and lately it seems to take longer to get parts. Should I just drop him like a rock so he learns the super hard way not to be a slime ball? or take the high road and hope he doesn't keep the attitude up after certification (if he even makes it)
+humblemechanic I start at Ford tomorrow I'm kind of stressed I want to impress the crap out of my trading guy. He got me In the door and gave me a cart to start filling. I hope I don't screw this up thanks for the advice.
DUDE you got this! Just be open minded, do what you're asked, NEVER stop working, and ask questions. First day is the most stressful, but the easiest too. Go F*cking get it man. I am pumped for ya
HumbleMechanic its personal preference really, I did regular technician for 8 months as a full time co op student and didn't like it so I got an apprenticeship at a truck centre and I love it. I'm tall so having no hoists is nice haha
thanks for the input i would like to get in the parts department as in a apprentice i currently work in the oil and gas industry for about 6 years its time for a change
I know that I'm a good apprentice or whatever you wanna call me but my mentor is such an ass and honestly I'm not learning like anything from his to be honest especially things like diag which I REALLY want to improve on but for the love of god he just wont really tell me how to do properly because im pretty sure he doesn't know how to do it himself
one more thing as an apprentice, don't ask too much when your trainer is troubleshooting. 😊 ask later once he found the problem.
I'm a mold maker, but I never mind questions just say "this m thought process, ect" never hurts to bounce ideas around.
,
I've been having the crappiest couple of months at work, being beat up by cars and stuck with crappy jobs, developing bad habits and bad attitude. This is definitely a wake up call. I remember just a handful of years ago when I'd give up anything to be a mechanic. Some days when the job gets real tough, it's easy to forget how much I do enjoy working on cars. Thank you for the wake up call and all your amazing videos. I'm also a VW specialist so I can really relate to what you're saying
So after 16 hours in the shop as a lube tech/automotive apprentice I can honestly say that your advice is spot on.
I got stuck between tasks that can be done because I had already checked the trash, swept my bay, made sure my fluids were stocked, checked on the mechanics, etc.
Finally one of the master techs was like you can go pump used oil into the oil furnace tank, or go clean behind the tire machine.
Then he said the drive area can always be sprayed down and dried because we are bringing cars in all the time, customers occasionally come back, and so we do what we can to try and keep the shop clean.
Great advice, thanks for all of the information.
Thanks for the advice. I just started my apprenticeship today at Subaru STi and I definitely look at it as my dream job. It took me awhile though I'm 24 and you could say I wasted 6 years of my life in college and hospitality with no degree. I think if I had started when I left high school the passion would have faded very quickly Having to work long hours and battling to hold several part time jobs has taught me to appreciate this job. We have the best Subaru technician in the world with us and I will do my best to soak up as much knowledge from him as I can.
Hell yeah bro I just turned 26 got an apprentice job at a local owned shop on the other end of town but I'm loving every minute of it. Took me forever to get my foot in the door anywhere with no exp. and no degree.
I’ve been a express lube tech at Subaru but going to start next week as an apprentice. I am 22
I’m an apprentice for Audi and I just wanted say thank you, because your video really boosted my confidence.
Same here
great video mate. I'm 29 and starting an apprentice on the 16th Oct. i always wanted to work on cars but never got to it till now. hardly new anything about cars till start of this year but quite nervous about my first day.
How's it going?
I'm 27 and I'm starting in September, I have been really worrying about how its going to be starting 10 years later than everyone else who started as teenagers. How did it work out for you?
@@darranmilligan9733 Don't worry about it too much! I know you weren't asking me but the best advice I can give is to focus on self improvement. Try not to compare yourself to others especially when it comes to speed. Speed comes with experience and it's really easy to compare yourself to other techs that have a lot more experience. Just focus on how you can improve and don't get overwhelmed with everything you need to learn. I still have a lot to learn and I'm always trying to expand my knowledge. This is an experience based industry so don't feel bad about not knowing everything when you're starting out. The longer you do it the easier it will get. Good luck with the new job!
i have watched this video like 30 times.. love your videos. i am almost done with tech school here in GA. and i have my first interview with a jag dealership tomorrow. I don't have a lot of experience with cars but if work is needed to be done on my own vehicle i try to do it myself.. small things. but anyway just super nervous about jumping into a new career and watching your videos just makes me feel better about my choices. great work friend. wish me luck.
I hope that it went well for you. :)
I wanna be an apprentice for the steamfitters local 602. I fear that I will be young compared to everyone else and they would work faster then me :/ College isn't for me
Yup, the pace experienced guys are showing may be quite taunting at first. It's even hard to follow it all. But being slower is nothing to be ashamed of. When you've been working at you new place for a while, you may want to try and be quick on your own vehicle at first when it needs some jobs to be done. Helps at the shop as well.
Update?
Watched this before possibly starting my first job. Helped a lot with my nervousness because I have no experience at all. Wish me luck!!
I hope it's going good/you're happy
i am in the exact same position right now i hope u see this and let me know how it was for you!
the filter can crusher has been a good friend to me to release stress some days
I'm in my third week of a light vehicle tech apprenticeship with Honda and I've already started to venture into third year processes and ideas. I've also managed to come up with a question that has genuinely stumped every techie in the workshop XD
Great Video!!! I became a Nissan apprentice in December. I pretty much did everything you are saying and still do. I did my first timing chain job on a Frontier this last Friday and did it successfully of course with asking questions when need be and taking breaks when i needed because i was getting a little overwhelmed. I started as a lube tech in Oct. of 13 and knew right away i wasn't doing that for very long. Anytime I had free time from being a lube tech i went and worked with the techs. I pretty much started doing oil changes, tires, any kind of easy job i could do for them then started doing brakes, PDIs, flushes and anything else they would let me do. I finished tech school in Aug of 14. Then finished up any certifications for Nissan for warranty work, piled on a few ASEs and continued to prove myself to the Techs and supervisors that i could be trusted to move up to an apprentice position until I finally became one. Since then i have done a dozens CVTs and a slew of other "hard" jobs. Also grow thick skin you are going to get the hazing of your life. I'm sure its all in good fun.... I think LOL. And a lot of "your not done with that yet?"
I'm just finishing up my first year in auto tech and got one more year to go. I've been at my Chevy dealership 6 months now and already am one month into my apprenticeship. When I first started there I was a lube tech, and I was part time compared to the 2 full time lube techs, so I tended to have a bit of free time. So I would just walk around and see what everyone was working on. They'd usually let me help out or at least watch. I got lucky because one of the master techs that usually never likes having an apprentice grew fond of me and offered to take me under his wing and mentor me. He's the guy everyone goes to when they have a question or concern, so I'm being trained by one of the best. I try my best to work hard to show him that I'm worth all the time and effort he's put in.
Great video Charles, this absolutely applies to all kinds of positions. Right now I'm in college (accounting) and have been fortunate to get internship experience, and everything you said here works in my field too. Learn everything you can, be willing to try different projects, maybe something you aren't sure on or have never done before, etc. My internships have had more than their fair share of boring work but having the right attitude makes everything better and I've been able to learn so much. Learn, hustle, and have the right attitude.
This is my first time watching your video, and I can honestly say that I 'being a mechanic/technician apprentice' have done all of those steps and I had walked in knowing anything about cars to being a tech on gm, ford, dodge, audi, bmw ect.. from that now going to a bmw dealer is a great way, plus you meant many mentors friends and s lot of opportunities with having an open mind and wanting to keep learning. Like I said even though I saw this video a little later I would like to thank you for speaking out and sharing your knowledge, trust me it works!
Love this podcast. As a brand new apprentice these videos are extremely interesting and helpful. Thanks buddy
thank you for this video I am in school for automotive technology at the moment. I also plan on going back to college after I get a job as a auto tech for auto mechanics. unfortunately the school I am at stopped funding engines and transmission repairs. but I have a really great instructor if I need help he's there in seconds and he always stresses on safety. I really enjoy your videos keep up the great work
Thanks for the video, man. It's not only about mechanics, I'm a psychologist and the theory still applies. Cheers from Brazil!
Awesome video!! I think it's so important to have ENTHUSIAM! Just like you said, that's the main thing that got me my job. When I had free time in sales, I jumped in the shop. I was willing and eager to learn everything I possibly could. Also, admit what you don't know. It shows a willingness to learn, and shows you're not going to make a mistake just because of your ego. It shows you're genuine, and people trust you more. Also, show passion. Be excited! Be eager! When people see my excitement, they're more willing to help me. I've gotten sone awesome training from people who just liked my eagerness. And always be busy! There's ALWAYS something you can do! Ask questions, solve problems as much as possible before you're even asked to. Constantly watch, learn, anticipate the next step watch CZcams videos to learn more, read books, anything you can to learn. It shows when you're in the shop. And also, don't pretend to know everything. When I admit I don't know something, people are willing to teach me, because I'm honest. Be humble!
And may I add…be a slave cylinder to the master
Thanks you so much got this video! I am a green first term Electrician Apprentice and it has really helped.
Thanks for the video is a very inspiring message to me. I'm a person that's interested in the automotive industry a the message is very clear.Thank you Mr. Humble mechanic.
I just started as a apprentice at Toyota. Thanks for the tips.
AWESOME! Congrats
Update
I'm sorry. Worked at Toyota and was the worst mechanic experience I've ever had with a mechanic job as well as a job in general. Best of luck.
I work at a small independent euro repair facility as a shop assistant and I think one of the big things is to have an open mind. We have a MB master tech, a VW master tech, and a domestic, Asian based master tech. They each have very different approaches to diagnostics but they all produce well so its worth it to take note of the tools used often and try to be as helpful as you can in their diagnostic process. Transitioning from a SO Verus to Autologic and Vag-com has also been a great learning experience.
There are definitely two types of apprentice - those who are into it, and those who just have no "gumption" at all.
They have to be pro-active (or hussle), and show initiative - I didn't mind being asked for help if they're not sure or they needed something checked, but it does bug when they don't think things through when with a little bit of thought they could have easily come up with an answer themselves (I mean when they do it consistently), or at least not try.
It's a balancing act as well, at first they need to be doing stuff, and asking questions, but not to the point where they wear you out with it. I don't expect them to always be off doing something either, sometimes they need to watch what you're doing - I guess it's a bit like the the "monkey see, monkey do" thing, they need to see how it's done first, before doing it themselves and eventually learn why along the way.
Im in grade 11 and im in my 3rd year of automotive but my last year really set my mind towards being a technician so next semester im have a coop that i am hopefully taking some sort of automotive for but your videos have really helped me learn more about the mindest and things to know going into this environment then my autoshop teachers could of taught me, so i say thank you
Your videos have really helped me with with a lot when dealing with the shop even staying away from tool trunk thank you.
awesome. Glad to help/
getting back into my trade again, Very hard very stressful but I love watching this video over & over just to get my self of steam back up. Went to so many shops were I was just being called Stupid. Never a good feeling (even worse when you start believing them). I hope this next job will be different & I hope I can be a good Apprentice for the shop. thanks again for this video
You mind sharing your experience? I’m about to start my very 1st apprenticeship here in central Cali as a 43 yr old nursing graduate. I love cars to care more than actual people but of course don’t get me wrong I still love people 😅
Thank you for all of these tips, they have helped me and I can guarantee many others. Very motivating
+Billen Ted awesome. Thank you
Huge thanks for the advice. I start an apprenticeship on Tuesday at a Subaru dealer and i’m super nervous for the first day. Had 2 years shop experience at my high school and looking forward to tech school in the fall. Thanks!
@Humblemechanic I just wanted to publicly say thank you for your podcasts and the work you put into it to make it what it is. I am looking to give her a go, as it were, and make a career change. Everything has been very informative and helpful to being able to navigate the start up process.
I am looking to start out at a shop apprentice, and a great way to determine what tools you need is go to several different colleges/tech schools that have automotive programs and ask to see a required tool list. You can also contact the sales reps from Snap-On, Mac, Matco etc. that service that area. Requesting a tool list that the college requires. doesn't necessarily mean buying from the sales rep. But there are ways to find out what you need without taking time out of your shop forman or journeyman mechanics day to explain what tools you need, why you need this specific tool, etc.
CZcams also has instructional videos on how to use tools correctly. So that way your tool lending program doesn't come to a crashing halt when your mechanic sees you using their 50.00 screwdriver to pry out a nail or what have you.
awesome video, makes me motivated to go back to my old apprenticeship. i thought i just wasn't good enough at it but i check almost every other box for a good apprentice. thanks a lot man this video was inspiring.
Charles great insight, that positive reinforcement and leading people into becoming leaders themselves Is good.
I found the author John Maxwell has helped me develop my people into better leaders who eventually lead themselves and help carry the load instead of burden their leader.
Thanks for this vid !
I started from the bottom in detail working my way up. Leaving behind 10 years as a butcher with Wholefoods Market to follow my dream. I've been a apprentice for three months now. Have two of my eight certification done need more classes for the rest. Have a key to my mentor's box never used it. Have more tools than most of the other tech's already. I'm hourly so five days a week I'm there 7-6. Giving it my all to one day be a Certified Master Subaru technician! Love the channel and thanks for all the advice.
Hi Charles, Great video! What I think makes a great apprentice is attitude as you have spoken about. You can teach a mechanic skills and how to fix a vehicle if they have the right attitude. The best apprentices make your life easier, they are helpful but dont get in the way. They think ahead about what might be needed next. There is nothing better than getting up to the next stage of the job and your apprentice has gone and got the equipment you need and has everything ready for you.
This really set things pretty concrete for me. What I mean is that, based on what I've been doing in the last few weeks in GM's Apprenticeship program, it's made me feel a lot better about myself. I always ask questions, I try to learn every little detail from our senior tech when he's working, he allows me to do stuff and be hands-on, he makes sure that I don't go in over my head. Within the first 2 weeks of my apprenticeship, I was doing a 12.6hr engine rebuild practically by myself. (And I finished that job in 11hrs!) However, because where I work at is such a small dealership and our senior tech is extremely old school, it does make me feel like I'm missing out on good education. If anything, what I do take away from all of it is what others do and don't do, learning from their mistakes, and watching what the master tech does and learning from anything he does when I can. I think the best part is that despite having to deal with a rather hostile work environment due to lack of communication (which has gotten better) and a general manager with a fire-happy way of life, I've been able to impress everyone with the skills I've brought to the table and things I've learned thus far, and I've really only been in the automotive technician (lube tech) world for a few months. I can only push myself to be better. I just hope things either improve or I can find away to move to a better store that will allow me learn much more and work on higher-end vehicles in the brand.
Here's the thing about being a good apprentice. You're number one thing you do not want to do is walk into the shop thinking you're the next best tech because will be put in you're place real quick. Until you're mentor can figure you out and what you can and can't do you will be doing the little jobs like getting oil filters, handing tools to techs etc. When a person like Charles asks you to do something like change oil by you're self for instance while he is across the shop and you don't feel conferrable just say so we would rather do it than have you mess it up by thinking you know. And I think the most important is there is no stupid question we all have made it in this trade by asking questions.
+Lucas Desjardins
in other words dont be a "know it all"
Be a slave cylinder
Thank you for this video! A lot of what you say is very motivating!
Very useful video. Those who have no mechanical or trade background are often confused about how to behave or act as an apprentice.
Just got a hell of an opportunity @ 29 yrs old as an apprentice mechanic at a Chevy dealer with very minimal experience. I’m so willing to hustle and excited to learn all this knowledge. Just hope I can do a great job. Thanks for the inspiration Im hoping my good mindset will carry me to success and make up for my minimal experience
You got this!!!
Thanks brother . I’m about to start my very 1st apprenticeship today at this independent licensed shop here in central cali. I was referred from an aspiring mobile mechanic I spoken to. I figured independent shop can have more pros than cons when it comes to servicing variety of car repairs and diagnostics compared to a particular dealer out there. I’m 43 yrs old and have some work experience on my backbone. I have a bachelor nursing degree from Philippines but the concept of becoming an RN is just not for me. Regardless I learned a great deal of PATIENCE which I can truly apply to become an ASE tech here in Cali. UTI by the way tuition is $40K compared to an online I enrolled $999 but CON is with no hands on as part of their program. Affordability is a must for me haha. Anyway…after watching this vid …to prep yourself mentally on the reality is essential at every detail aspect of becoming a PRO. Your tips is 1st class exceptional! 😊
I'm fixing to graduate lincoln tech in grand praire texas.i was gonna start my own business but now that I'm on my last 2 weeks I have decided to wait until I have a few years under my belt at a dealership or shop before I do that cause knowin my luck somethin bad would happen.this video has help give me confidence heading into this new world of car mechanics
Ill deff look in to it always wanted to work for a dealer... thanks
Great video!! I just started a new job this week working in a Indy shop after working in a GM dealer for the last 12 years. A lot of what you said also applies to a journeyman starting in a new shop.
thanks. congrats on the new job.
Very inspiring. Almost finished with the auto program I'm in, and starting to have doubts, but this definitely helped me out. Thanks!
Awesome! For me those doubts have come and gone a lot in my career
How do you motivate yourself to continue your work?
thanks great video.
Just started working for Mercedes-Benz and from what I hear the work is rather similar to vw
Qualified Vloger Thanks!
They are very similar, and share a lot of similar parts. I hear MB is a great company and takes really good care of their techs
those are cool shades!.
on another note, being a brand tech in the US looks like a solid career, over here it doesn't exists and the handful of "stealerships" are known to be crooked(always try to sell you severely overpriced stuff) with very substandard work and tales of horrors from former tech working there
Excellent video, thank you for sharing your knowledge.
I got screwed on a couple euro cars by torquing spark plugs… fords I will torque every time, otherwise you build that muscle memory of what the proper tightness is and what will keep the plug in the engine.
Charles this video is so on point. Well said sir. I don't even work on cars and it still made sense.
Ted Bear a
Really good advice! Awesome vids as always man. Keep it up! I start my apprenticeship in less than a month, can't wait.
I have worked as an Audio Engineer for 8 years but I have been really thinking about changing careers. Since I have been building cars as a hobby (2 BMW's and 3 VW's) I have been thinking about applying at a dealership and starting from the bottom and working my way up.
Some possible cons: I know I like to work in my own rhythm. I know I get really frustrated as an enthusiast when I don't have the right tool for the job. I'm not sure if i could work on other people's cars since I won't be able to enjoy the work I've done first hand and people's neglect for their cars would bring me down. Lastly, I don't have the cleanest driving record.
Some pros: My rhythm is pretty fast. I care more about the job being done correctly than just getting it done. I seem to have a bit of a talent for diagnosing issues. I see it as making money doing a hobby I love.
Do you think its something that I should possibly pursue or should I keep it as a hobby?
I’m not the humble mechanic but I can relate to how u feel and where u coming from…I think imo that it goes more deeper than a hobby …it’s something that you truly have passion for it…like the story of athletes such as Kobe MJ and Tom Brady…they have that hunger to win 😊
@@leetos.4915 lol wow! 8 years ago. Still working in the AVL industry. I have sold all my euro cars at this point and have since gotten into bikes as a hobby. 70’s era choppers and new Harleys. Way easier to move around and a different kind of fun.
Thanks I’m starting my apprenticeship soon
great video
I think the most important thing is having a really great attitude and a willingness to do the Dirty Jobs nobody else wants to do absolutely key I work in the heavy truck feild and love it out your work in and you will make it
That buying tools thing must be really frustrating!
In Germany the shop owns the tools, isn't that the better system? Saves you so much money and frustration! 🤔
Sebastian Eschenbach I like the freedom of owning my tools and my toolbox. You find yourself out of work you have everything to make money in your possession
the tech he is describing is far and few between. a lot of the new kids have an entitled mentality witch needs to be conquered before they can start working in auto repair. UTI sells a romantic image of auto repair and when the reality sets in and the kid lands the job at say "Toyota of South Carolina" and they have to sweep the floor or bust tires they get a bad attitude.
Eddie Da Silva thankfully I'm not like my age group as every old person think I'd be..
Great insight- thanks
Again great video, one thing I wanted to point out is you always mention that you torque spark plugs. I always that was overkill, until you told your story in this video of how one guy did not and the car got towed back with the threads stripped out of the head. So it can be important for you as a trainer to tell your apprentices why, or a story behind why you do things a certain way instead of just saying do it this way. It may take a minute or two longer but how much time will they save in the long run if they do it right the first time, every time. Also important to note if you are an apprentice and you don't understand why someone is doing something a certain way or taking extra steps ask why or ask is there a story behind why you do it that way?
Is torquing the same as snugging it equally?
@@leetos.4915 nope you need to get a torque wrench to get it to the correct tightness
@@jamez2u thanks brother
or for get to tighten the bleeder screws on a floating caliper when you do a full flush...
jameson collins oh, ull know when you back into the wall or fellow co-workers bay
I landed an apprenticeship at a local mechanic shop and it’s so hard to not feel shitty when you fail and having to learn on the fly .
YEP! This is where your leadership should be coming in to help you keep a level head.
I am trying to change career and am starting my first work trial tomorrow. I have no experience (coming from a completely different industry) but will follow your advice and hope for a positive outcome.. At least I won’t have to fake wanting to be there, I genuinely want to be there and want to learn and have been counting the days till I start.
Great advice to anyone looking to start in any trade!
Thanks, appreciate you sharing your knowledge!
people that dont watch videos like this one aren't good apprentice.. here for a reason
I work as a Porter at a Chevy dealer and everyone is cool there, the electrical tech says if I finish Electrical I *which I'm taking now* and Eletrical II he will see what he can do about me being his apprentice.
Jack Mendez HELL YEA!! Keep up the hard work man, and buy that other tech a beer or 2
Update
Nice video, I'm showing this to the all the new guys that walk through the shop.
Could you possibly make a video on how to land a job as a apprentice? and where are the best places to apply to
Im going to be taking automotive in a few months for high school and learn the basics then try and get in a company
Listening skills are so important for an apprentice. I think you have to accept that you really don't know much of anything when you start out. A lot of techs will offer advice to those who listen to it and apply it. Also, like someone else said, having thick skin is important. You are going to mess up. Learn from it and try not to dwell on it.
I was doing the wiring harnesses and turbo charger recall on the civic type R, working with the master tech. I start on the bottom of their car unplugging the harness and then I get to the starter. Should have know not to touch it but I did anyways and what do you know, I broke the starter. Not only did I touch something I shouldn’t have but I broke it. At the end of the day it wasn’t a big deal we got it replaced and the car rolled out no one was mad. But touching stuff you shouldn’t is a good point and asking questions is always the right thing to do.
I’d rather answer “does this look right” than “why didn’t the mechanics fix my car right?”
I start as an apprentice at Volvo truck & bus in a couple of weeks as a third year apprentice as I’ve already completed two years at my current place. Wish me luck!
Hell yes!!!
your videos are awesome and have helped me a lot in general i cant explain how much this one confirms my getting out of the army. i love to work and here when were not deployed we sit in an office with a thumb up our ass. budget too small to get parts.... and im sitting there after 4 years of being a diesel mechanic, doing nothing to better myself or the equipment; sweep the floor or just sit there on my phone because im replaceable. Im so done with this. Id rather go to school (thanks to the army money which is an awesome benefit) and work toward something i actually love doing.
+Chase Dupeire that's awesome man. Thanks for your service.
Great tips, thanks for the video you really are a humble technician !!!
+Bostero 12 thank you!
Thanks for the tip I'ma be on top of my game with this one
Go get it!!!
hi i have been doing my apprenticeship in the UK for honda now for 2 years (total is 3) i like to be really interested in what my mentor is telling me, and at every opportunity learining something new! this video has really given me insentive to keep it up thanks!!
💯 Thank you!
Can you please do a video on a fix to the infamous CEL "bank 1 sensor 2" on the MK6 GLI/GTI when installing aftermarket catalytic converter and test/downpipes?
Thank you so much will follow your advice
Starting tommorow at ford and I know nothing about cars I am slightly worried, what if I’m not good?
You won’t be... at first. This is why your main job is to learn. Not just at the shop. At home too
First of all I just want to say nice beard 👍 I am 17 and I have had a two day trial In a garage. This is one of my first videos I have seen of yours. I will be watching many, many more. Thank you for all the kind words you have said in this video. Keep up the videos. I have a lot to catch up on. 😁
+Craig lister rock on man!!!! Good luck in your garage time
+HumbleMechanic Thank you, iv seen quite a lot of your videos now. you are not boring and I can easily sit through a 20 minute video. so fascinating. 😀 🚗💨
2021 I've seen this video more than 5 times and I've even cried with so much anger at myself
+HumbleMechanic This is fantastic advice, as an apprentice myself (Currently Furniture Making, different industry altogether) this is spot on what I try to do every day.
To get the most out of our training, we need to be good apprentices, but also need a good trainer.. like you. I would be honoured to be the Apprentice of someone with your additude.
Thanks man, Keep hustling
Thanks for the video.
Pendemic :)
Thank you very much this was very helpful for me
This was great
Thanks I really needed to hear that advise
Awesome!
Excellent video, I just got my Associate Degree in Automotive Technician at my local community college and I have applied to a few places, the most recent being a Cadillac Dealership any tips on how I should prepare myself? I have basic tools and have completed repairs on my 2007 Buick Lacrosse such as, sway bar, sway bar links, inner tie rods, wheel bearing, and brake jobs. I also wired and replaced a blower motor resistor that failed. Don't have too much experience anywhere else in vehicles.
I am a current bicycle mechanic, my shops head and master mechanic. I learn best with my hands and am quite mechanically inclined. Made a mistake of going to college and getting four year degree and no solid job after. Mechanics i feel is still my calling. What advice would you tell a mid 20s year old? start a path to be a journeyman? ASE certification? go back to school or a local JC that offers a trade program? Im doing ok now but know I want to do more.
Hi Charles could you do a video on technician salary’s ?
Very helpful thanx a lot
good speech
what does it take to get a job in a dealer... i am pretty knowledgeable and love vw what should my steps be in becoming a tech... thanks for your time love the vids
+billy craven Go and apply! That is really the best thing to do.
+billy craven yep, be honest about what you know and what you don't. It may not be as hard as you think. Especially if they have a service express program. That is a great place to start.
I lost my passion in cars I'm more of a motorcycle person now but I prefer being a mechanic for cars even tho it doesn't interest me anymore 😢
I really want to love cars again I got a apprenticeship soon I'm only in it for the money now, but I forgot why I chose this career in the first place got any advice I'm 17 BTW
I just landed an apprenticeship about to start June 6th little nervous been wanting to do this my whole life now that I have the chance I wanna give it everything I have to be a certified technician any advice would be awesome 😁✊✊
You got this!!
I've been ASE certified for close to 20yrs. Lately my last batch of apprentices has been dismal. Failing simple entry level ASE exams. I have one now who has a bit of hope but he's got this "I need to be the hero" attitude and with ease throws you under the bus to the service manager when you don't teach him something cuz you're busy. He also gets "friendly" with parts guys and lately it seems to take longer to get parts. Should I just drop him like a rock so he learns the super hard way not to be a slime ball? or take the high road and hope he doesn't keep the attitude up after certification (if he even makes it)
+humblemechanic I start at Ford tomorrow I'm kind of stressed I want to impress the crap out of my trading guy. He got me In the door and gave me a cart to start filling. I hope I don't screw this up thanks for the advice.
DUDE you got this! Just be open minded, do what you're asked, NEVER stop working, and ask questions. First day is the most stressful, but the easiest too. Go F*cking get it man. I am pumped for ya
How's it going
Being a diesel/heavy duty mechanic is way better
I have heard that many times before. It's a totally different world.
HumbleMechanic its personal preference really, I did regular technician for 8 months as a full time co op student and didn't like it so I got an apprenticeship at a truck centre and I love it. I'm tall so having no hoists is nice haha
Im not trying to hate on nissan trucks ... out of asian trucks manufacturers i like toyota tacoma trucks
That’s fair. This was a great truck for us. My wife LOVED it. Lol
where were you three months ago....
Chase Stapley working in express lube for my dealership.
thanks for the input i would like to get in the parts department as in a apprentice i currently work in the oil and gas industry for about 6 years its time for a change
That should be pretty easy. Parts is a tough spot to be in, but the good ones are much needed
yeah that is true
I know that I'm a good apprentice or whatever you wanna call me but my mentor is such an ass and honestly I'm not learning like anything from his to be honest especially things like diag which I REALLY want to improve on but for the love of god he just wont really tell me how to do properly because im pretty sure he doesn't know how to do it himself
How can I find a apprenticeship if I have no experience whatsoever?