Passat B7 CC Can Gateway replacement
Vložit
- čas přidán 8. 12. 2021
- B7 CC gateway
AN hardware fitted for Can Extended required by ACC and TPMS high.
Coding has to be done in installation list and in coding to select the correct platform. - Auta a dopravní prostředky
It helped lot bro.
Thanks
Thx brother
Thank you :-)
thx a lot.
Hi, how do you know which modules you have/do not have after installing the new CAN gateway?
Did you take a screenshot of the old CAN gateway installation list before installing the new one so that you know which checkboxes to tick?
Correct, take a picture of the old checkboxes as new one can be different order. If the old one is broken, open the autoscan and click gateway installation list and see what’s showing as not registered , then take a picture of it and add to installation list in can gateway
Hey there, so I have a 2012 NMS Passat and it has a faulty gateway. I’ve never replaced a gateway and I just got obdeleven. I’ve noticed a gateway on eBay with the same hardware & software version but it says SJ8 and my original part has YNF on it. Is there a difference?
Hi, NMS Passat is based on Jetta , Can gateway will have to be replaced with same part number ideally but will need coding. Not sure is even in the same location, might be in the drivers side behind relays as golf mk6 , look on passat forums , USA ones, B7 EUROPEAN is different in many ways compared to NMS
Hello! When change canbus for the other vehicle(used one)the system deploy component protection, or not? Thanks in advance.
Not on passat b7 untill 2015, if 2016 onwards yes
good day I need help, I looked for the problem and found your video, I found the module, where before the lights on the car's roof, the outside and the sunroof didn't come on, I removed it and everything worked except the roof didn't open, what could it be!!
Use vcds and do a complete scan, see what comes back after clearing faults. Is rare for the gateway to become faulty but can be.