Followed video step by step and you put the second washer in the wrong way around when re-fitting causing chuck to jam with bit in and not release! once put it back the right way around it works great! Thanks
Incase it helps someone else: Mine was seized up (just a strained motor sound and not much spinning) - ended up i didnt need to remove the chuck - just opened the main body, pulled out the gearbox with attached rotor - and blasted the stator with compressed air - got all the dust out of the windings - and then put it back together - though dont use an electric screwdriver as it was a bit tight and was seizing again - did it back by hand and its sweet as :)
Cheers this was much help and the way the ball bearing went into the washer 👌🏻👌🏻👌🏻
Thank you, this vid gave me the confidence to pop mine open and successfully fix it without spending a penny! Much appreciated!
Thanks saved me getting a new drill 👍🏻
Followed video step by step and you put the second washer in the wrong way around when re-fitting causing chuck to jam with bit in and not release! once put it back the right way around it works great! Thanks
Absolutely!!!!!
Incase it helps someone else: Mine was seized up (just a strained motor sound and not much spinning) - ended up i didnt need to remove the chuck - just opened the main body, pulled out the gearbox with attached rotor - and blasted the stator with compressed air - got all the dust out of the windings - and then put it back together - though dont use an electric screwdriver as it was a bit tight and was seizing again - did it back by hand and its sweet as :)
Thanks for your help it worked a treat
Nice and good video, thank you 👍
Looks like washer holding spring was replaced upside down
Ok im definitely getting the quickchange version dhr243z lol
Lucky with that circlip! 😢😖
Nice vid
helped me ,thanks
Please Mr. C clip, please don't kick my ass.
You installed the washer around the wrong way, not helpful.
Thank you for your help it worked a treat