3 Ways To Make The Fantastic Daicamping DL30 Multi-Tool Even Better!
Vložit
- čas přidán 30. 07. 2023
- The Daicamping DL30 is a heavy duty budget multi-tool great!
19-in-1 Screwdriver - amzn.to/3ODYG5i
27 in 1 Klein Screwdriver - amzn.to/45d2Re9
Bosch cutting blade - amzn.to/3qbHJGe
Single mag pouch - amzn.to/3YiMZ7G
Leatherman Large Pouch - amzn.to/3qcPEmA
Amazon affiliate links help support this channel.
Amazon Store - www.amazon.com/shop/hvacbudget
Husky 37 tip Screwdriver - www.homedepot.com/p/Husky-Mul...
Daicamping DL30 - www.aliexpress.us/item/325680... - Věda a technologie
For the bits I just took a yogurt lid and cut a piece down to the size of the elastic sleeve and rounded the corners. I slid the plastic in the elastic sleeve and now my bits slide in very easily in front of the plastic and behind the elastic. The retention is still great and I cannot shake the bits out no matter how hard I try, but inserting and removing is incredibly easy with no snagging at all. And the plastic piece stays put as well. It is a 100% fix that cost zero $ and only took 60 seconds.
Clarification: The order front to back is elastic, plastic, bits, rest of case.
Great idea!!!
That was me pointing that out regarding the bosch blades.I am waiting for my blades to come.The multitool arrived already and it is great.I'll keep the file and a saw in the sheath ,of course
Really appreciate the heads up! Those blades are far better than I expected!
Yes, a great tip. I bought the DL30 a few weeks ago and will now get the Bosch t-shank cutting blades.
What I would love to see wit this tool, replace the thick awl with a thin needle, change the flathead to a scaple holder, change the small flathead with a pry bar type tool.
Thanks for letting us know about the Husky ball detent bits. I picked up some last night and I can't wait to try them.
Nice!
I love mine, never had a tool with the t shank swappable attachments and it’s great. The tool is fantastic.
Great info, I will be back to watch it again. Just bought my DL30 and will get it in October! Thanks for this
Great find on the Husky 37-in-1. I got one the other day. The one big downside is that the bit holder only holds 14 of the 18 bits. I'm looking at alternate bit holders.
Thanks!
This was a great video! Looking forward to more content on this tool!
Thanks!
Really important and useful information, thanks
Absolutely a beautiful & informative review! Thank you 🙏 so so much. Ordering your same set up today
Thanks!!!
Just bought a DL30 thanks to your input!
Very cool! I love mine!
I have the Bibury version of this (essentially the same) and it comes with a little better of a pouch. It’s available on Amazon.
maybe just put an old credit card/phone card/plastic sheet in the elastic pouch to shoehorn the bit kit in easier 🤔
Another potential addition is that Leatherman sells replacement metal cutting blades for their EOD model that fit the same t-shank. I added one to mine.
Great idea! I forgot about that!
Best multitool out there.
Can you do a short or maybe another video on the cardboard "spacer" for the t-shank? You went over that a bit fast and covered up the adaptation with the caption.
Sure!
HUSKY is good value. We use lots of part to mod our multitool. Try using magnets on the holder to hold the bits so it doesn't fall into the sheath. Cheers mate.
Good tip!
I only need about 4 bits for EDC so i drop a tiny round magnet into the driver receptacle and then i can use standard bits. 3 or 4 single sided bits in a slim holder fits into the front pouch much easier
Nice!
I cut an insert from an old plastic check book to cover the space between the bits and the outside elastic pouch. It now doesn’t snag and works perfectly.
Great tip!
I have the dl1 on its way. It is the perfect tool selection for me. I picked up a beat little but kit from Temu. It's called 11pcs/set S2 Alloy Steel Material Screwdriver Bit Spanner Tri Wing Torx Hex Star Spanner Screwdrive Magnetic Bit Holder Screw Driver Bits. Surprisingly useful and will be even better withe the 1/4 bit driver on the Dl1.
Very nice!
Cant wait til other manufacturers make a non skeletonized version
I wish Nextool designs one of the versions.A stone-washed finish one would be nice
Agreed! Stonewash, Black and maybe even a tactical version would be cool!
Awesome
Thanks!
Me again Margret. After your month in video, I am thinking of getting one. My problem is that I want a multitool dedicated to outdoor use. They simply don't make one. I used to modify a Leatherman Wave for the purpose, but eventually snapped the expensive 154CM main blade. Now that they have switched to 420c, I would rather buy a can of beans and make a knife out of it before buying another Wave. I won't pay premium price for junk. However, the steel in these DL30 is okay for the purposes, better actually than Leatherman, so I am thinking of getting one to mod the heck out of. The T shank adapter is going to provide the ability for three extra cutting blades, fine-cut wood, metal, and diamond or carbide coated for stone. That in itself will be worth it's weight in gold. I can also mod some other stuff to fit the T shank, like a gouge and a hook. The screwdriver blades I will turn into chisels, and the can opener can stay a can opener, lol. At this price point, modding is affordable. I also intent to mod a ferrocerium fire-steel to fit the bit holder. THEN it will be outdoor oriented.
That sounds really cool!
Great idea.
@@hvacbudget8600 At that price, if the blade ticks me off too much I can tear it apart and make a real main cutting blade from O1 tool steel. What I DON'T want in a blade is to have to resharpen every five minutes when using it to carve wood or prepare game. At that point, stainless steel really is bottom-shelf grade material for the job. The whole "sharpens easily" argument leaves out the fact that it gets dull just as easily. I think I am asking too much out of commercial companies expecting quality though. Even the 154CM wasn't as good as O1 can be, if hardened and tempered properly. You can do stuff with O1 that freaks people out, such as have a rockwell 60 edge and a dead soft spine, which means the blade won't break, can literally get bent into a "U" shape, even though it will get scary sharp and hold that edge for half of forever. If you do it right, the edge won't even crack when bent, but that shows skill.
@@paulandrulis4672 that sounds awesome!
I bought a dl1 and a dl30 as father's day gift and both are great. I keep dl1 at home and dl30 in the garage on my toolbox. I often just use dl30 and it serves me well on various tasks. I have a folding utility knife and a Victorinox swisschamp for more fine works where I need to work on small stuff. Then dl1 and dl30 comes into play for more heavy duty home DIY repairs
They are great tools!
Thanks for this, i like the ratchet driver, extension bit and clip on the surge, do you have any work arounds for these? Thanks for sharing and your hard work.
Great ideas for a follow up video! I'll look into some options.
Thanks
If you just use the screw driver without the handle you have eight tips and two nut drivers and possibly an extension. Just that alone may store nicely in a pouch.
True.
The last thing to upgrade in this tool - is to grind the hook on the serrated blade and and put a little ratchet into the pouch :D
what I learned having multitools - the metal\plastic saw is really essential. It already saved me many times - just last weekend I cut the copper 125A bus to proper size to repair broken distribution box, and cut additional holes in thick plastic box to fit the corrugated pipes inside - the wooden saw just can't help me with that as well as battery tools. Disposable t-shank blades are really good find!
That would be cool to have that hook on the serrated blade!!
Hello, my daicamping dl30 just came in and so far it's great. I have a one problem, when I open serrated knife, the lock stick is not working sometimes. Is there any way to fix this?
I would check to see if the bottom of the blade is ground too flat or not enough. Maybe the pivot needs loosened or tightened. It sounds like maybe the blade just isn't clearing the spring so it can snap out in place.
Had the same issue. After oiling and a day or breaking it in it has never failed to lock up.
Will the pair fit inside a roxon phantom pouch with the bit pouch behind the tool or put the bitkit in a little ziploc bag (with a side benefit of less chance of rust/corrosion)?
That might work. The Roxon Phantom is definitely a larger tool.
Love my chonky phantom. Only multitool in my collection that can be carried out and about in Aus.
2:12 Aren't scalpel blades cheaper? I didn't even know there was a T shank scalpel adaptor. If I get the DL30 I'll definitely have to look into one. Though I'm thinking about getting the scalpel replacement for the blade slot and trading out the serrated blade for it. I never use a serrated blade but a scalpel blade would be great for boxes.
4:26 Thanks for they Husky recommendation. That looks like a good, cheap driver set on it's own.
Scalpel blades are cheaper. I don't know for sure if a scalpel mod for the Surge fits in here but it might.
@@hvacbudget8600 I know there is a scalpel mod for the wave but what I don't know is if the Surge blades and Wave blades are compatible. If they are then the Wave scalpel might work. If I get the DL30 I might try putting one of the Wave's blades on it as a test run.
@@form4li7y I like that idea! Let me know if it works!
@@hvacbudget8600 I will if I go with the DL30 or the Surge. I still haven't made up my mind yet. Looking into GOAT multitool now. I've run into an issue though. Watched a few videos on it and went through it's site and still can't find out where it's made. I know it's a US company owned by a vet but I can't find out where it and the components are made.
Edit: I just checked and the same guy that makes the Wave scalpel also makes them for the Surge. Both left hand and right hand versions.
@@form4li7y Nice!
Nice tool but where is the pocket clip?
I'll have to work on that. Hmmm.....🤔
Why not use the built in blade for cardboard cutting ?
You could but I'm not a fan of sharpening my blade a lot if I can use a blade like this one.
What kind of metal is the handles? I want to get my son one and have his initials engraved.
2CR13
Can you find some bits we can buy here in europe without breaking the bank? The dl30 is just arrived at home today and I already want extra bits
It is a bit hard to find these on Aliexpress at least. In the USA Klien and Husky are great options to find double sided detent bits. Are there any 10-in-1 or 12-in-1 screwdrivers that use double sided bits at any of your local home improvement stores?
Is the Bibury version of this better or are they exactly the same?
The Bibury version looks exactly the same to me just more expensive. I don't have the Bibury but from the pictures, it's the exact same tool.
Amazon has the Bibury version for $42 currently, after applying the 40% off coupon. Plus they offer an extended warranty for an additional cost.
Was that blood on the inside of the box 😂
How can I put a clip on it.
czcams.com/video/vXCOZsAKmSc/video.html
Has anyone found a pocket clip that fits this multi tool? I think that's the only thing I'm not liking about it. Otherwise I love it
The Niteize pocket clip I attached is the easiest option.
please what is the length of the blade
3 1/16" Long
@@hvacbudget8600 thank you very much