HOW to BUILD a SOLAR CAMPER VAN | Designing My Solar Array Version 2.0 | Solar Electric Vehicle
Vložit
- čas přidán 26. 12. 2020
- How do you even begin to design one of these machines? It's a lot of information but Route Del Sol is willing to take on the challenge! Watch as I try to explain my design process in this short and sweet video!
Chapter 1:
• Chapter 1
Chapter 2:
• Chapter 2
We're driving from Alaska to Argentina, only using renewable energy in our 100% Electric, Solar Powered Camper Van.
💪 👉 SUPPORT US on PATREON: / routedelsol
🖥️ 👉 SUBSCRIBE: bit.ly/RouteDelSol
🎧 🏖️ 👉 Playlist: Alaska to Argentina Traveling: bit.ly/AlaskatoArgentina
🎧 🚐 👉 Playlist: By Road Trip Traveling Vlogs CZcams: bit.ly/ByRoadTrip
🌏 👉 More information: www.routedelsol.com
INSTAGRAM: / routedelsol
Facebook: / routedelsol
Our Camera Gear:
Vlogging Camera - amzn.to/2WFyoSa
Photography Camera - amzn.to/2WF7p98
Videography Camera - amzn.to/2WDSZWZ
Lenses:
Vlogging - amzn.to/2WAb0p3
Photography - amzn.to/2WDl7te
Videography - amzn.to/2WDwwt5
Drone - amzn.to/2WA2Pcs
Stabilizer - amzn.to/2WDTdgN
Batteries:
Canon - amzn.to/2WDxHJ1
Sony - amzn.to/2WAZUAk
Drone - amzn.to/2WHPgI9
#vanilfe #electricvehicle #SolarVan
#AlaskatoArgentina #VanTourSolar #paradise
#TravelingVan #SolarElectricVan - Krátké a kreslené filmy
Awesome!!!! 😁👍 Swiveling arrays will be great to see!
That is a lot of panels
I think so too!
Haha it's a big ol array hey 😁👌
Think they’d be interested in building another one of those? I’m doing a 24’ solar powered pontoon/houseboat. Already have the Torqeedo motors and SunPower panels, just need a way to tuck the panels in when it’s on the trailer.
@@FullTimeOverland send me an email if you are serious. I'm sure we could get another one built here at the shop routedelsol@gmail.com
So glad to see you’re getting back on the road. Be very careful how you attach the panels. I bought a pallet of sun power panels and attach them to a frame on top of an off-road camp trailer. I used one bolt through each grommet, and within 1000 miles, the corners started breaking off, from the panels vibrating in the wind. Of course, I didn’t know this was happening until one flew off going down the freeway. Lucky, like you, no one was hurt.
Thanks for the tip!
Excellent Joel, looks that Route del Sol 2.0 is moving!!!!
Yes! It is! We missed you you were in the comments instead of the chat! haha!
@@RouteDelSol ETA for the completion? I am finishing "the smal leak" in my RV, as soon as I finish it we are planning to go to Baja for few days, we may meet there... if the pandemia let us
Ready for the video!!!
Glad you were there anyway :)
Me alegro mucho que Route del Sol marche sobre ruedas pero mas sabiendo que hay argentinos colaborando en el proyecto. Te felicito y sigue adelante que los caminos son marcados por los grandes soñadores
ooo that looks crazy, really looking forward to seeing how this shapes up!
You and me both!
ok, feliz 2021!!!!
Looks great, good luck with the build. Love your content.
Much appreciated!
I have followed you from the start and have loved your travels (especially the drone footage). Although I was left a bit wanting on the technical specifications So Mate! Make sure this time you give us a blow-by-blow run down a detail of the build! a 7.9 Kw array seems workable, but we need to know things like expected total storage of batteries and expected average Watts per Km/Mile. I think there will be a lot of people who will want to follow on your coat tails and try to do the same thing.
I would love to know guesstimated budgets, and who your sponsors are (You have given us the Solar panels) etc. etc
Definitely want to give all that information. You should join in on the next livestream and throw out some of those questions would love to answer them live for you.
@@RouteDelSol I am out of whack with your time zone here in Victoria.
This is the most incredible van I've ever seen! I'm planning to build something like this, only I'm gonna use an xt truck platform and a roll array (rollable solar charger). Imagine, within our lifetime, we could have a nearly infrastructure free camper van.
I like the new array much better then the old one.
keep up the good work .
Wonderfull route del 🌞 congratulations
Many thanks!
new design looks good, looking forward to seeing the prgoress
Vale, perdón, fue culpa mia. Saludos!!!!
Glad to see a new plan and the much needed help you got. I wish you where closer or I was down in Baja to physically help you out and donate my time to your mission. Looking forward to seeing it action! Good luck.
That would be cool
Great work man.. you're legend.
I'm looking forward to seeing the completed system in action. The swivel will make it a very cool looking system. All the technical/practical stuff aside, this will definitely help with creating great shots for your videos. Which in turn will excite more people into solar energy!
Right on! :)
69 panels - nice. While I was one of those doubters on insta for the folding method, but you've explained your reasoning well and I think it will work just fine. I also like how you're using tons of smaller panels, repairs should be very easy in the field with a few spares tucked under the bed. You're pioneering a whole new concept, I can't wait to see the next solar travelers iterate even further. My personal hope is a small solar motorcycle camper trailer towed by a zero or something, that would be a fun trip.
Thanks so much for you comment!
@3:20. I went with the thin flexible panels too. In addition to being hundreds of kilos lighter over the entire array, their thinner profile creates a lot less drag. At speeds of 55-60 mph I've noticed less than a 4% loss of efficiency of my Leaf AFTER adding the roof rack and panels. Those thin panels cut through the air like a knife. I also like that you used the smaller 100 watt panels for the array. It's a lot more nuts and bolts than the bigger ones, but if one goes out on you (as they occasionally do) you loose a smaller percent of the overall output. Video like #122
Yes all the same sort of reasoning here from me. And yeah the idea is to be able to easily replace the panel if I should need to.
This was an excellent and concise summary of both the adventure and challenges with using, breaking, and redesigning unique systems for a specific purpose. I especially like the decision point regarding the expensive sliders. Looking forward to 2021!!
Glad you enjoyed it!
Great work folks!
Glad you enjoyed it!
awesome. happy new year! 🎉
Happy new year!!
Excelente video Joel. Pero insisto, ampliarlas muchísimo tus seguidores si colocarás subtitulos en español. Ojalá tuvieras oportunidad de acerlos así. Como sea seguiremos pendiente de tu progreso y te deseamos lo mejor en tu aventura. Un fuerte abrazo!!!
@javier Podes ir a la esquina inferior derecha del video, donde dice "CC" y seleccionar subtitulos en espanol ;)
@@onehappykombi chingon, gracias que bien. Así lo entenderé mejor. Un abrazo!
@@onehappykombi mucho mejor. Ahora sí Joel podrá ampliar sus seguidores por lo que le resta de su recorrido y seguro tendrá muchas aventuras que compartir.
I am concerned about the attrition on the mobile parts. They are going to work on the structure of the array or on the frame of the solar panels structure? I think you should design it with some pieces that you can replace easily in case of weathering, breaking or bending.
Yeah definitely a good point! You'll see how we overcome all this as we move further into the build.
Looks amazing, I am so inspired on how you ovecamed this hard situation after the fire and never gave up.
I am really looking forward on seeing the results.
Greetings from Mexico City.
Gracias! Saludos de baja!
Hi thats amazing :) Good Job!
Swivels are awesome. What does the new multi direction solar panels mean for this design type?
Looks like you have some great people adding their support to the project. If you looked back to when you started, would you have imagined the whole adventure turning out like this? Quite amazing how far a bit of perseverance has taken you. :)
No way would I have imagined it to be like this! It's been such an adventure
In india aka Bharath these where not sports but life at that era , archery and every wepon based practice where real life incident with many board based games etc chathurankam
Thinking about a battery-powered boat one day and was wondering how I could expose more panels to the sun when at anchor. Your system is genius. WIll be keep to see how you brace them (if needed) against the wind. Cheers and Happy New year from me back here in Oz 🍺☀️😀
Cheers! Hope to see that boat one day!!!
If you are charging with lets say 7kw of solar panels in ideal conditions, how efficient is the whole process until it reaches the batteries? are you actually getting close to 7kw of charge or does the charge controller/inverter etc. take some power away?
It is never 100% efficient. You have even voltage drop in the wires so not only the instrumentation that has inefficiencies. There is up to a10% loss from the panels to the batteries...
@@RouteDelSol Thank you for the info. :)
Is this array less power than the last one.. if it is does the weight loss for the lighter panels make up for that power loss? How much power can your charging equipment handle? 8kw from what I remember. You could get a 2-4kw deployable array to keep in the back to keep you charging at full capacity power while stopped.
Yes slightly less power but way better quality panels. We have to wait until field tests to see what that means in the real world.
Great to see! Q: how are the flexible panels going to be attached to the frame of the array?
I think with nuts and bolts and some metal shingles
At first, I got to say I love that you carry on and that you get that kind of support. The mission to a sustainable future needs to carry on.
I got a question on the solar-modules Choice. You said it was because of weight issues. I know, that there are „light“ glass panels with a aluminum casing that only weight about 15kg (33lbs) an has 325watts peak output.
With your railing systems isn’t the whole construction equaly heavy to such a system?
Is it because you need to stick to 12/24volts?
Why not use marine grade solarpanels with a wood or cardboard backing?
Is the weightlimit do tu regulation of the van? Or because of the railing system? Because if learned, that weight on a vehicle is only a problem while accelerating. When cursing the weight should matter as much.
You are right about the glass panels and us reframing them. They end up the same but there is not really a way around framing the panels ourselves no matter which we choose from. There are a million ways to do things too I wish I could try them all. I can't wait to see the community grow and learn from one another all the ways to do these kinds of builds.
@@RouteDelSol
Thx for the reply. I love the Projekt, especially from an engineering standpoint. it shows what „diy“ can do.
I’ve looked a little further into the topic, to see if it’s possible to do some kind of camper trailer (popular in Europe) system, that can be used off-grid and will be able to support an electric towing vehicle.
I‘ve found the sunman earche modules with just 4.5kg (~10lbs) because weight limitations are pretty harsh in Germany.
Looking forward to your project I hope that more people will look in this topic and that it‘ll become a massmarket product
Cool! And how are you guys getting financial support for your trip? This kind of experiences (the broken panels) make me thing that you may have some back up or certain income to respond to.
what sort of range do you get with the system? and how long do you normally hang out for to recharge?
Up to 200 miles (300kms) and about 2-4 days of hanging out
@@RouteDelSol that's utterly wild dude well done!
I'm not an engineer or anything, but doesnt having so many pivots and sliding stuff, bring in many potential points of failure? I am sure you have done your homework and it should look amazing, but it seems like that could go wrong in many ways, not to mention the amount of precision needed to keep it together with such a long turning arm
We're pretty confident in how this is gonna shape up there's lots of advantages and disadvantages in this design but ultimately it will work out :)
My name is Curtis And I'm 7 years in tiny home
Hello I'm new to this channel
I was wondering did you say the Mobile Van is on a 48 volt drive system and the main question is are your panels run in series or are they going to a solar booster, and what convigeration are the panels
I hope your still well
No veo los subtitulos en español :-(
Ya vendrán. Tu mismo podrías traducir.