Honda CB650R | Guide | Windshield Installation
Vložit
- čas přidán 6. 09. 2024
- Installation guide for a third party CB650R windshield. This windshield provides little to none wind protection but looks really good. All the installation steps were based on the official Honda instructions (source: cdn.powersport.... Any questions feel free to ask in the comment section below.
Camera:
Cannon EOS 1300D | 1080p @ 25fps
Motorcycle:
Honda CB650R (2020 | Euro 4)
Accessories:
Small windshield
Interphone USB adapter
GUB phone mount
Music (by Corbyn Kites):
Staycation
Blurry Vision
Birds
![Honda CB650R | 14 Accessories installed so far [Part 1]](http://i.ytimg.com/vi/dFtRGsmsUMw/mqdefault.jpg)
Very useful & straight forward installation video,thanks! Watched it step by step while installing mine…
Thanks alot, I am really glad that these videos help other people 😊
Great video. Thank you for helping me out on my installation.
Hey man, you're welcome, that's why I do it 😅. Ride safe ✌
couldn't of done it without your help. thank you.😊
Hey hey, thanks alot for the feedback, honestly that's why I do these videos, so people have an easier time working on their bike than I did 😅😅. Ride safe ✌️
Great step by step installation.
Thank you very much 🔥✌
No need to remove the headlight tough.. good video
Hey Tiago,
The procedure depends on the type of bracket you get, some brackets are simpler and don't require the headlight to come out, the one I got does.
Thanks for your feedback anyway 👍
@@ChillMotoRides Didnt know there were different brackets... makes sense then, thanks for the info
Thnx !! Your video made it a Super easy installation 🙏🏻
Hey man, thank you so much, I am really glad the video helped you ✌
Thanks for the instructions. Just on the way to pick up my CB, but the shield is not delivered yet... I will try my luck with your instructions!
Congratz for the purchase, it's a really cool machine. About the windshield, It's not the easiest thing to install but it shouldn't be too hard if you're patient. Be careful with the dash screws, some motorcycles have them really tight, I used a torx head and I had no problems but I've seen people ruining the screws using hex. Best of luck to you ✌
Thanks for the help to instal the windshied ! 😉
No problem man. Really glad I could help you. Ride safe ✌
Very useful video
Glad you enjoyed it, ride safe ✌
It’s perfect! Thanks you
Glad to help my dude ✌
Thanks for sharing✌🏼
Thank you for viewing 😅😅💪
Your “step by step” was so useful for me😁,thanks
Awesome thx
You're welcome bro. I'm really glad you enjoyed the video ✌
Hello and thank you for these very clear instructions! Is this shield protective against wind or is it just for aesthetic?
Hello Eros, this shield is mainly for aesthetics, it might redirect a bit of the wind and perhaps make it a little bit less turbulent but don't expect to notice a huge difference. Thanks for the kind words and ride safe ✌
@@ChillMotoRides thank you! I will 😊✌️
Perfect
Thanks a lot ✌
ola amigo, parece que seria a mesma forma para fazer isso na cb 1000r 2020 em diante, certo ?
Olá Marcos, as motas são muito semelhantes mas eu não te consigo confirmar com 100% de certeza visto que nunca testei na CB 1000R. Espero que o tutorial te seja útil de qualquer forma, para o que puder ajudar, estarei por aqui se quiseres deixar alguma questão sobre o procedimento demonstrado no vídeo. Boa sorte ✌
Gran video explicativo. Gracias.
Thanks man I hope I've helped you ✌
Can anyone tell me what the tool is called to remove the top bolts (0.48 seconds) is it a torx ?? Can you tell me the size- I just got a screen and wanted to fit it but unsure of the tool- any advice would be very much appreciated.
Hello, it's a T40 Torx bit. Good luck on the installation 👍
Boas. Um deflector destes ou parecido para a CB125R também precisa destes passos todos para instalar? Estou a falar de um do aliexpress. Pensei que fosse mais fácil 😅
Boas João.
Não sei qual é o defletor que estás a pensar comprar, mas este também é do AliExpress (tens o link na descrição do vídeo). Quanto à tua dúvida, depende do defletor e das peças que ele tem para montagem. Penso que há uns mais simples que não te obrigam a remover o farol, de qualquer forma, este tipo de suporte que vês no video, parece-me mais seguro. Quanto ao tempo de instalação ou número de passos, eu digo-te que não é assim tão difícil, tenta é deixar uma manhã ou tarde livre para poderes fazer tudo com calma.
Espero ter ajudado amigo ✌
@@ChillMotoRides Obrigado pela resposta 👍
Hi mate, could u pls share me a link to buy this windshield
Hey man ✌. I've ordered mine through AliExpress, I cannot find the exact link but if you search for "CB650R Windshield" or something, it shouldn't be too hard to find. Let me know if you have any additional questions.
@@ChillMotoRides thanks dude🙌🏻
Not related, but asking. Can we install cb650r headlight on cb300r? Need that drl light looks on the cb300r.
Hey, I am not sure about that, never tried it 😅😅
Muito fixe o vídeo!!! Sentiu alguma diferença acima dos 120km/h com o defletor? Estou a pensar em comprar um. Abraço
Se existe alguma diferença é realmente muito pequena, o motivo da minha compra foi mais por questões estéticas, acho que a mota fica mais bonita assim.
Hi! Did ithe Small windshield improve anything?
Mostly the looks in my opinion, the wind protection is basically none.
On the 2022 CB650R - installation of the windsheild eliminates a high pitch whistle created by the dash when travelling upwards of 40mph. Worth it imo
Hey, have you bought the original one? i found some on ali express and they look the same and are more cheaper. what do you think?
Hey Aposematic. I didn't buy the original one, I bought one from AliExpress (I don't really think the one from Honda is really worth it). If you want to learn more please check the video description. Ride safe.
What size was that piece you used to remove the top bolt holding the head light?
Hello. I believe I used the T40 torx head because I didn't find the right size hex head. Did this help you?
So I just went to check the screw head and you really have to use the T40 head, any hex/allen head will not fit properly.
@@ChillMotoRides Yes thank you.
Same installation steps for cb300r?
Hello Gary, I don't know for sure if the steps are exactly the same but I wouldn't think they differ all that much. The windshield I bought came with instructions, maybe you can follow the instructions that come with yours and refer to this video to see if it can help you at any point. Any questions feel free to ask.
@@ChillMotoRides u r on insta?
Not yet, but maybe soon I'll be ...
Aber warum den Scheinwerfer rausnehmen??
Hey my friend, I do not speak German but I've used Google to translate it. I took out the headlight because the bracket that came with my windshield screws to a panel behind the headlight. I know that not all windshields come with that bracket and for some cases in fact you don't need to remove the headlight. I hope it helps you.
Always remove red battery cable first! And when connecting the black first
Thanks for the tip. You might have noticed I am not really too mechanically inclined 😅😅
@@ChillMotoRides your are welcome! Good luck with the chanel 🏍😎
@@motorr7394 Thanks man 🤙
This is wrong! When disconnecting, disconnect the negative first (black here). When connecting, connect the positive first (red here).
No it is always black first, i have the manual of this bike at the moment . . .
Por mais vidios cb 650r motor
Hey, yeah I should do it but I've been very busy lately. I do however have another idea for a future video, but it might be a while until I can publish it. Thank you for your comment man, ride safe ✌
bought on amazon? thanks in advance for the reply
Hello Emanuele, this product was bought from AliExpress although I believe you could easily find a similar one in Amazon with no problems. I'll leave a link here for the product so you can have a point of reference: www.aliexpress.com/item/4000822203146.html.
@@ChillMotoRides thanks man
When purchasing the windshield from the link you provided, does the bracket come with it as well? Or something that's ordered separately?
which year is this?
I think you're referring to the year of the motorcycle, in that case the bike is the 2020 model although the process is the same for the 2021 year version.
You don’t have to do all these steps, it’s way easier
Hey Jonas, I know some of these windshields come with alternative brackets that are indeed easier to install but that's not the case for everyone nor was mine. Maybe you could skip one or two steps, but for the sake of completion I decided to include every step mentioned in the official Honda installation guide. Thanks for the feedback, ride safe.
WTF Honda
What do you mean? 🤔
@@ChillMotoRides Just a lot of steps required to install a windshield is all, on my old bike it's like 4 bolts in total 🤣
To be fair I think the bracket I got is the hardest to install. There are other versions of these brackets that are fairly easier to install (you won't need to remove the headlight). Anyway, it takes time but it's not really hard to do. 😅