Start to Finish!! 2021 Can-Am Renegade X-MR 1000R 4Lok Build & Ride
Vložit
- čas přidán 14. 02. 2021
- On this episode of ehTV. We're off to join in on a build, and ride with our friends from New2YouTires & @BackfortyATV. Jerry has bought himself a new 2021 Can-Am Renegade Xmr and asked for a hand putting it together. It's a Renegade build with just about all the bolt-on's a guy can throw at one. Stay tuned and join us as we take this stock Xmr1000r and transform it into a Demon Renegade. Then it's time to test out the 34" Motohavoks with a winter rip. Will the Renegade hold up to the big guy's thumb? How will it preform? Will it Wheelie on command? Also I selected a new wheel and tire setup for Honeybee from Roger and the boys at the shop. What do ya's think of our choice? Comment below and let us know what ya think of the Renegades. Shout out to Dirtylife.ca for the parts hookup!! And a huge thank you to Roger and his crew at New2YouTires for allowing me to work with them on this project. If your looking for Wheels and tires for your Car, Truck, UTV or ATV, These guys are top notch!! Cheers folks &Thanks for watching.
Looking for a new vehicle? Checkout the great selection at Jim Thompson Chrysler in Kingston, Ontario www.jimthompsonchrysler.com/
Looking to shop powersports and enjoy the outdoors? Checkout the great selection at Bay Marine in Trenton, Ontario www.bay-marine.com/
Instagram
/ eh_tv
Facebook group page eh TV
/ 1075765425896938 - Auta a dopravní prostředky
The stickers under the fender nice touch ,excellent build doing it right.
Can-Am renegade 1000 2021 looking good
You should do a parts list price to give guys the idea on a build like this is big money 💰🤑
Awesome 😎
Sweet baby Jesus those machines are sick! Wicked content man. And ya can't beat some good shine! Cheers bro!
Absolutely a dream fourwheeler I would kill for one
Kill what
My rene been in retirement too. Broke rear drive shaft and pulled fuel line off gas tank. It hasn’t started since it broke on January 11. Won’t be back up and going for awhile and seen some real cold temps here in Minnesota I hope battery is okay lol
I've been watching this man for a while and I've def noticed that he's putting out professional content for a smaller channel. Keep up the great work tho man!!
@Eli Eugene stfu eugene lmao
The only bee I’ve seen this winter
Boy it’s tough lol Good vid brotha 🤘
Sweet bike too wow
That's a sharp lookin rene!! Killer work boyz
what a build, awesome!!!!
havent even watched the video yet but ill go ahead and see im sure its gonna be a good one.
I painted my snorkel gloss black like the machine made a huge difference nothing like a new machine and new parts lol
Awesome build guys!!
That build is wicked cool
Looks awesome man good job! Looked like a lot of fun.
Yeah man, super good group of lads to hang with.
🤘 sweet build guy
I can only dream of having a quad like that right now. Maybe sum day when I’m 50 I guess lol only 5 more years I better get on it hahah
Wow.....just wow...awesome work 🤘🤘🤘
Wicked build, great video
Great video man!! Was awesome getting to meet you guy's!! Hope you guy's had an awesome time at the shop with us!! Can't wait to ride with you again brother!! My video from the day is up as well 😎👊🍻
Can't thank you boys enough for the great hospitality. Ya's know how to have a ripping good time eh. Cheers brother
SICK!!!!
Can’t wait to see what honey bee can do the tires you showed at the end of the video 👍👍
Yeah man, me too!
S3 has the forwarded A arms and the stretched trailing arms for the 19s and newer now, I plan on doing both over the winter as the wheelers get used mainly for plowing when the snows on the ground and my sleds are the primarys during that time.
At the time they had them listed, but no stock!
Holy s... Eh the Monster looks Awsome Men 🔥💯🔥👌😍, i hope you have so mutch fun with the New Beuti 👍. Lets Rockn Roll Baby !!! Awsome Video Men ! And the Snow Fun Killahhh 🤙
Thx bud! It was a fun filled weekend without a doubt.
Dang I knew I should have went with a 1000cc Outlander Max. Instead of a 650. You fellas have a lot of cool aftermarket stuff out there. Nice video. Don't think my 650 can turn them wheels.
Thanks for the vid man 👍 do you know if there is much power difference between my 850 xt if I go with the 1000 next?
Nothin like apple cider shine. Real shine.
Loving the 21 models man. Broke out both atvs. After we've got about a foot of snow here in Arkansas. Im currently running 29.5 assassinators on my 13 model renegade eats through every unless you bust through some ice in a deep mud hole.
Calling for some good snowfall tonight in my area. Hopefully I can get out tomorrow for a rip. Figured it's about time we give the nators a run. Looking to take the 🐝 through everything. Haha
David Wilcox - YUP! One of my personal favorites for sure! Yeeehaw!
Seen him 4 times over the years! Great performance. Big time performer. Haha
@@ehTV1000 U got that right! I saw him once in Regina and once in the Toronto. Both in the 80's - lol
Great Vid and Build Lads💪🏾🔥
Appreciate it
Hey man I Know its a long shot but what color is that Radiator Relocation Kit Looks sick. Wanted it for my 2022 Cam Am Renegade Magma Red.
I bet when the big dude was ordering pizza,that was just for him😂👍
She turned out awesome love the red flake in the plastics looks absolutely killer and I can't wait to see those rims when you get them there gonna be off hook great video brother
I actually decided on some msa, mlocks.
@@ehTV1000 the ones that you were looking at in the box right gonna put yellow 🟡 on the aluminum parts if so those rims looked badass what do you mean by m lock
@@donaldwilliams5448 that was original plan, but 18's. But then we went Assassinators as he happened to have one set of thirty two's kicking around. So 14"msa beadlocks will be required.
🏆🏆🏆👍🙏
Thank you for sharing
Cheers
Sweet outcome but ?how does the pant on the plastics hold up
Sweet👌
Too much Canadian in one garage it's blowing my mind!!!!! 35:27 Canadian tuxedo in the background at it's finest!
Where did you get those fittings for the rad relocate?
What do you think I would have to do to run 33s on a 570 xmr Outlander
The yellow looks wow🙏💪🏻 How much is the price fro on the some too send in Europe? Thank you 🙏
What size rims and tires on the black one?
Wicket
EXHAUST SOUNDS AWESOME..... eh
He should have just ordered the frame and the motor lol j/k. Monster of a build.
Hahahaha
could you possibly do a parts list? im about to purchase a 2021 rene 1000xmr
Nice new video agan Thanks 👍How much everything here cost 😱 Looks amazing 👌 Your Renegade looks very nice🤗
Thx my friend, I would guess he was in around 10 to 12k after all said and done
Switching from video to video,hey Job I want xm310 31x10-14's😉
Cómo se llama ese lugar donde mudificaste tu cam am
Question buddy what kind of black glossy Rim that was and if I got 32" would I have to change gear shifts
I saw you put S3 "no lift shift" A Arms on with Demon axels, Were you able to remove the steering restrictor?
Wheel spacers ?
hello where did you buy all the accessories????
En qué tienda es eso
Great Vid. What Camera are you using?
How much was your yellow renegade?
how many miles do u have on ur renni
With the tune and the headers what do you have to do with dyno jet tune do you only tune it or does it need other flashes on it
It's as easy as picking the corresponding tune for the additions on the machine. Dyno jet has plenty combinations to choose from.
Please give me some suggestions on heavy duty tie rods, I do ot of forest riding driving over huge logs , I was told that's why my left tie rod bolt is loose , tightened it but see how long that lasts.
Lots of options for HD tie rods. I run stock to keep it a breaking point purposely. Easy to replace one. However, I have yet to bend one yet. Lol. But I have had the issue of the ends loosening up. Locktight if necessary.
Nice build but Honey Bee 🐝 sounds better 🤘🏻
Hahaha
Love the sound of that exhaust, What exhaust is that?
RJWC
And again why can’t I find that water pump anywhere
Rjwc headers
What headlights are on the black one? It looks like 4 LED's in each.
RJWC neutrinos
Im want to make my renegade 1000 xmr
2018 into a trail atv any suggestions what i should do for tires and all
Those efx mct's Roger has would be a great fit, same great preforming trail tread pattern as the bighorn, with deeper lug. Better protection from punctures and better performance in sloppy conditions.
Are the Halo's the Chasing Halo's 2.0 or the regular original chasing halos? I'm looking at getting some also. Great job on the video it was super fun to watch! Nicely done
Yeah new 2.0 I believe. Pretty cool setup
I've been trying to get an 850 XMR I live in central Newfoundland Canada I tried from Erica New Brunswick is there anyone you could recommend that's in the Atlantic provinces that might have an 850 XMR
Thinking about getting a sexy of assassinators for my renegade 1000 xmr what’s your opinion on them?
Great for the slop, use ⚠️for higher speeds and aggressive trail rides.
What's the wheel and tire setup on the black one? Is that 33s and 18s or 20s?
34's on 20's. But I had 18's with 34's havoks prior to this setup and it preformed better.
question where did they get those brake lights?
Slobbyknobs.com
Extend the rear ! That will make it badde than all them there. No more short wheelbase bs
Hey just wondering if another rider wanted to do a build just like your killer Bee would you point them in the right direction?
Sure man love to help, where are ya at with it thus far?
I'm still enjoying my kodiak build but it should be all paid off by oct this year then its time for a second ride and I really want to go can am
Jerry, what did that build run you?
Jerry: ....yes 🤑
At the very least I'd say 10 to 12k
Bro she is nasty.... mrrpm mods next?
How does the painted plastics hold up?
Not good
How Much for Plastics
Will he be selling those stock a arms front and rear ?
He is
how well does the paint hold up on the plastics and who did it
to early to really say I suppose, But it sure looks fantastic. I believe he said he was going to clear wrap the nose and side panels as they vibrate and could cause rashing after a while. Simcoe Auto Collision in Barrie Ontario did the paint on the plastics.
eh TV awesome thanks for the reply. Im from the Severn area so I know where that is. Also who did the running boards they look great.
Which cvt is that?
STM
Ride with braydon price he has an 1000c mr renegade
You gonna scoop them tires ?
Would love to, But don't know anyone close that does.
I want to buy one and have one built like this, i just wonder how much it'll cost me!
Around 10 to 15k on top
Hows the paint hold up on the plastics?
Seemed good but Jerry said he was going to clear wrap side and nose panels for extra protection from vibration.
@@ehTV1000 makes sense!! And that was a good hike for you going to barrie I'm in Keswick and went to bay city to look at a x3 last summer. Looks like I'll be getting 2 outlanders now
Where is this shop located
Barrie Ontario
great video #atvpassion
😎 can I try?
Where can I get those halo lights
Farmudding.com
Farmudding.com
Get a custom demon wrap
Tough to cover up that beautiful paint though. Lol
You need to buy and outy
I really need new tires I took my wheeler for a walk today
Well these boys got plenty to choose from.
@@ehTV1000 I don’t think my tiny 500 would turn them tires
should have told em to just sell you the motor and chassis lmao, talk about a rebuild
Hahaha
4x4 yes bioes ever aelor toia ojo sii
When the mods cost more than the bike🤣
Snow riding looks like as much fun as a raging case of the herpes. Js
Hi
Good day
You are so cool
@@ehTV1000 are you Going to lift it
I hear too much music not enough commentary... music way too loud
Street bike in Canada = ZERO SENSE/WASTE OF $$$$