Man i really want one of these 1/24s but they look so hard to work on. So small😄 i guess I will watch you for now🙏✝️☮️😄 always appreciate and enjoy your talent
I got an Orlandoo last week. This changed my perspective. I can assure you the 24s're huge😉🤣. Just kidding, they're still challenging, but the right tools make the job easy. Thanks for watching Lou
Yeah there is definitely a lot of trial and error with Scx24 parts I have had parts not fit properly very frustrating good work though it does look nice
Three times Brent, three times I tried it. "So einen Hals!" (such a throat)😡. Now I have best of both worlds, a straight axle at the rear and brass parts at the front😉. AND a mega flex😁
Nice one Dirk! Sorry the front housing didn’t work out. I hope the company will supply you with one that is machined better? That little rig is a beast anyway! 👍👌 thanks for sharing my friend.
Thank you for your great words. This means a lot to me. I thought about it. But it also meant putting of the rear axle, cleaning up everything and hoping (cheap China) the new one might fit. Big A would have exepted my complainment, but I'm not sure if they would direct me to the manufactor. So, one axle fits and the other one not. I put this to my experiences for the next car😉
Hi Craig, I had the same thoughts first. But these little cars are astonishing easy, when it comes to screws. But cheap parts are sometimes trash, and it's hard to know when qualitiy parts are cheap, too. But all together the SCX24 is great to handle, even with big hands😁
Oh yeah, you know me well. If something didn't work, I put it away and forget it. Someday I'll get a fladh into my mind, try it again and most time I'll find a satifying solution😉
Very cool it looks a lot like mine, I had the same problem with the Injora wheel weights I messaged them and they sent me a new set but it took awhile to get them!
Thank you for the tip. I think the problem is that the rims are not from Injora. First I had the right rims and they fitted well. Maybe I'll find nice Injora rims. Even thought of letting the rings made wider at some juvilery.
@@RCBirds Interesting mine were Injora rims and tires but didn't fit. Oh well maybe like a ring you can have them sized to fit! Lol! Funny thing is I have a set and I know how to size rings hmmm 🤔 lol!
That was the big issue with my old beadlocks on the TRX4. It's snowing, you want to ride with the tracks and end up with two hours of changing. Snow's not seen ofzen here and it doesn't stay long. Leading to hectic 🤪 Thanks for watching and your kind comment Steve
@@RCBirds Try treal for the crawlers I have them on my 1/10 trucks they come apart with only a few screws and fit and work much better easy to assemble with the tires too. I think I have some videos showing them and they make the 1/24 scale ones now too.
Thank you Steve, the link had reached me. I was blocked by youtube. I think it´s because of your link. I watched the video again, I let it pass. But I don´t know why I´m not seeing here. And I think it´s because I have problems by remembering names that I don´t know what Treal means.
Looks great, but soo anyoing when you buy upgrade-parts and they dont fit. Hope it will perform as you expect even whitout the metal front axle housing.
The rear axle now is straight, that's a key point. But, yeah it sucks. You don't remove the parts you already had build in, clean everything up and send it back, hoping the new might fit. Thanks for watching Mattias.
❤ Buenas, felicidades amigo, Good content naman nito ayos na ayos, ahh galing keep safe po lng lagi. keep on MALAYO MARARATING NG CHANNEL MO, NEW FAN MO NA AKO LODS . keep on vlogging more videos pa lods . salute . ❤ matek yan lods nasa likod mo lng ako! ❤ silent suporter mo na ako lods pa shout out naman lods ❤ 5;56 I WANT TO HAVE ONE TOO WOW SO COOL LOVE IT
Nuja, da ist noch eine vierstellige Differenz zu überbrücken. Das Projekt lag im Sommer schon bei über 2 Mille und das waren nur Traxxas-Teile (Alles rein, was reingeht), sowie der Dualsound. Mit den Aftermarkets habe ich noch gar nicht kalkuliert🙄🤪. Aber kommt noch, sieht im Augenblick sehr gut aus.
This Bronco is without a doubt, a great looking one...and I love the new rims 👍😊
Thank you so much. What was interesting for me were only five screws on every rim. But that the brass rings won't fit is annoying.
*Thank you for sharing such a great video! 👍👍👍*
Thank you so much my friend, you're welcome
Hi,
Nice update of your crafting!👍
Greetings Seven🖖
Thanks a lot for watching and your kind comment my friend 😊
Man i really want one of these 1/24s but they look so hard to work on.
So small😄 i guess I will watch you for now🙏✝️☮️😄 always appreciate and enjoy your talent
I got an Orlandoo last week. This changed my perspective. I can assure you the 24s're huge😉🤣. Just kidding, they're still challenging, but the right tools make the job easy.
Thanks for watching Lou
@@RCBirds
🤣🤣🤣 Perspective is correct
Yeah there is definitely a lot of trial and error with Scx24 parts I have had parts not fit properly very frustrating good work though it does look nice
Three times Brent, three times I tried it. "So einen Hals!" (such a throat)😡. Now I have best of both worlds, a straight axle at the rear and brass parts at the front😉. AND a mega flex😁
Nice one Dirk! Sorry the front housing didn’t work out. I hope the company will supply you with one that is machined better? That little rig is a beast anyway! 👍👌 thanks for sharing my friend.
Thank you for your great words. This means a lot to me. I thought about it. But it also meant putting of the rear axle, cleaning up everything and hoping (cheap China) the new one might fit. Big A would have exepted my complainment, but I'm not sure if they would direct me to the manufactor. So, one axle fits and the other one not. I put this to my experiences for the next car😉
🇮🇪 cool sharing very good
Thank you so much for watching and your kind comment my friend 😊
to achieve the goals we want, of course there are many obstacles. but what you do, I think is very good. good job my friend.
I have a straight rear axle and more flex in the chassis, so over all I'm hsppy. Thanks for watching and have a great weekend
Great video as usual
Thank you so much my friend😊
Sweet upgrades! Awesome work.
Thank you so much for watching and your kind comment my friend 😊
Very nice upgrade build bro 👍😊
Thanks a lot for watching and your kind comment my friend 😊
Nice upgrades RC Birds 🤘🏾
Thanks a lot for watching and your kind comment my friend 😊
Schön gemachtes Video. Ich bin aktuell auch viel an meinem SCX 24 dran ✌✌
Danke sehr. Irgendwie habe ich das Gefühl, das wird ne neverending Story. Macht aber Lenz😁
Looking good Dirk!🙂👍
Thank you Peter and have a nice weekend😊
@@RCBirds You too Dirk!🙂
Some great upgrades Dirk. I am not sure I could work on such a small scale!!
Hi Craig, I had the same thoughts first. But these little cars are astonishing easy, when it comes to screws. But cheap parts are sometimes trash, and it's hard to know when qualitiy parts are cheap, too. But all together the SCX24 is great to handle, even with big hands😁
Cool upgrade Buddy 👍👍
Thanks a lot my friend 😊
Too bad about the front axle housing!😔
The new bead locks look real nice Dirk!
👍😊
But the rear is straight now. But you're right it's fustrating first. Glad, you like the rims. Thanks for watching Jeremy😊
21 so nice thank u
Thanks a lot for watching and your kind comment 😊
Nice mods! Too bad the front axle housing didn’t work for now. I’m sure you’ll get it sorted eventually.👍😊
Oh yeah, you know me well. If something didn't work, I put it away and forget it. Someday I'll get a fladh into my mind, try it again and most time I'll find a satifying solution😉
Nice upgrade! 😎👍
Thanks a lot for watching and your kind comment my friend
Very cool it looks a lot like mine, I had the same problem with the Injora wheel weights I messaged them and they sent me a new set but it took awhile to get them!
Thank you for the tip. I think the problem is that the rims are not from Injora. First I had the right rims and they fitted well. Maybe I'll find nice Injora rims. Even thought of letting the rings made wider at some juvilery.
@@RCBirds Interesting mine were Injora rims and tires but didn't fit. Oh well maybe like a ring you can have them sized to fit! Lol! Funny thing is I have a set and I know how to size rings hmmm 🤔 lol!
It sucks not everything worked out to plan! It looks good and I am sure it will perform great!
You got it Addam. I'm happy that the rear axle is straight now and the costs aren't such as high like on the biggies😉
Hallo Dirk, wieder super interessant 👍 Hab ein schönes Wochenende und LG Heiko
Danke sehr Heiko, Dir auch ein schönes Wochenende 😊
Great job bro, great upgrade👍😀
Thank you so much for watching and your kind comment my friend 😊
Großartige Job, das schaut so einfach bei dir aus, dicken fetten daumen für dein Video 👍👍👍🛻💨💙💙👍schönes Wochenende
Vielen lieben Dank Euch und auch von mir win schönes Wochenende
Nice upgrades sir! 😁😎👌
Thank you so much😊
Cool gemacht mein Freund 👍👍
Danke schön, Bro
Great job buddy 🥰🥰😎
Thank you so much 😊
Ahhh that’s a shame . Keep going bud 😊👍
Thanks Dom. It's annoying, but part of my journey in this for me new RC field. But I got the rear axle straight and more flex. Have a great weekend.
Looks good, man I HATE those wheels that have a bunch of screws on them such a pain to work with!
That was the big issue with my old beadlocks on the TRX4. It's snowing, you want to ride with the tracks and end up with two hours of changing. Snow's not seen ofzen here and it doesn't stay long. Leading to hectic 🤪
Thanks for watching and your kind comment Steve
@@RCBirds Try treal for the crawlers I have them on my 1/10 trucks they come apart with only a few screws and fit and work much better easy to assemble with the tires too. I think I have some videos showing them and they make the 1/24 scale ones now too.
@@ShenRC excuse me, treal? Google can't help me. I'll check your videos as soon as I can
@@RCBirds czcams.com/video/74Sm_DcT0BA/video.html
Thank you Steve, the link had reached me. I was blocked by youtube. I think it´s because of your link. I watched the video again, I let it pass. But I don´t know why I´m not seeing here. And I think it´s because I have problems by remembering names that I don´t know what Treal means.
Looks great, but soo anyoing when you buy upgrade-parts and they dont fit. Hope it will perform as you expect even whitout the metal front axle housing.
The rear axle now is straight, that's a key point. But, yeah it sucks. You don't remove the parts you already had build in, clean everything up and send it back, hoping the new might fit. Thanks for watching Mattias.
❤ Buenas, felicidades amigo, Good content naman nito ayos na ayos, ahh galing keep safe po lng lagi. keep on MALAYO MARARATING NG CHANNEL MO, NEW FAN MO NA AKO LODS .
keep on vlogging more videos pa lods . salute . ❤ matek yan lods nasa likod mo lng ako! ❤ silent suporter mo na ako lods pa shout out naman lods ❤ 5;56 I WANT TO HAVE ONE TOO WOW SO COOL LOVE IT
Thanks
cool my
Thanks a lot 😊
Die Zeit und das GELD würdest Du besser in nen TRX4 Bronco21 stecken. 😉 🤪
Nuja, da ist noch eine vierstellige Differenz zu überbrücken. Das Projekt lag im Sommer schon bei über 2 Mille und das waren nur Traxxas-Teile (Alles rein, was reingeht), sowie der Dualsound. Mit den Aftermarkets habe ich noch gar nicht kalkuliert🙄🤪. Aber kommt noch, sieht im Augenblick sehr gut aus.
🛻🛻🛻😍😍😍🔥🔥🔥
Thanks 😊
Good upgrades, good job mate 💪😁💯
Thank you so much. You're welcome.
@@RCBirds thanks my Bro 😊