Basement in Texas??? Replacing plunger cylinders with Muddyfeet
Vložit
- čas přidán 27. 07. 2024
- Getting Bill set up on a basement foundation. Another tricky set with it being on the side of a hill. Getting the shop ready for insulation. Its been a time consuming struggle but its finally getting ready for it. And last but not least getting the plunger cylinders replaced on the 38 meter concrete pump. They've been leaking a little so it was time to replace them.
I do like a maintenance video, love learning how it all works.
Should be some more in the future
Nice shop I understand how y'all feel on rehabbing a shop I have done Dat many times it is a pain but needed to keep a good safe work place
A lot of elbow grease goes into it
@@MuddyfeetConcretePumping Dat is true but with it in the end
A basement in TX ??? It will be a good spot to keep out of the heat 😎 You should get DP back down to pass on his knowledge on ICF pours and setting the blocks!!
Workshop is taking shape, you will get it the way you want it soon enough, then you will have to keep it tidy !!!!
Hopefully will get to meet up soon
Given how long the unpainted pipe has been on the truck, you might be better just buying the next set and getting them painted up ready for replacement of the rusty ones!!
That’s probably what will happen
Not alot of field work going on around here yet ground is to cold and wet for framing.
Hopefully temp start warming up in May for the farmers.
Wearing a t-shirt while being outside working only happen about 2 days a week. Which is pretty normal for this time of year.
It started out cold today but ended up being a nice afternoon
Shop is looking Spiffy!! 😉
It’s coming around
I LOVE a good basement 👍
I like them also.
lol the First basement i have seen you do.
Yes it’s our first to video.
Great video
Nice video
Works better when your not laying in the gravel
There is always something to do on those things
Always
Oh, this is really interesting!
Thanks for watching!!!
You might want to check the screws holding the roof metal. They have rubber washers that will eventually degrade and crack, and if you spray foam the roof again, you won’t know it’s leaking for awhile.
I put a lot of new ones up there. But I agree. Those rubber gaskets don’t last forever
Ah good! Could have been why the old insulation came off so nicely in some spots!
I hadn’t noticed before that these trucks are mid-ship drive like a fire truck as opposed to a standard PTO interesting!!
A standard pto wouldn’t supply enough hydraulic pressure to run these functions. These hydraulic pumps put out a lot of pressure
Did they say why they poured the floor with the footings. We do basements in Illinois with bad soil and water issues everywhere. Our floors are poured in between the walls on top of the footings. This locks the walls in place, seals the joint between walls and footings, and makes floor 4 inches higher to help with water issues. Yes I've always been curious why no basements in Texas. You guys start doing alot you will be looking into buying a telebelt or a loop belt lol. Have a great day and stay safe.
I didn’t get a chance to talk to the contractor about the project. I hope to on the next pour.
@@MuddyfeetConcretePumping we do full pours for walls not icfs. Alot of difference between them and in the way they are poured. Icfs arent very big here but our soil calls for extra strong walls. We use aluminum forms and we can pour all the way up and go around. Not sure if you've done icfs but on 9 foot walls it will be done in 3 lifts. Most I've seen also use pea gravel mix with super in it. Most pump guys in my area dont like icfs. Alot of horror stories about blow outs. Do a good video on the walls I'm very interested.
Nice job bro!
Hey man! Thank you.
Shop looks nice
Thank you. It’s a work I’m progress
What do y’all spray for concrete or not stick to truck? Dish soap?
Diesel and hydraulic fluid
Yes air will move hydraulic cylinders
It doesn’t take much
What is the spray that goes on the truck?
Diesel. Keeps concrete from sticking to it.
I live in kingsport Tennessee and its 40 here right now and its post to be down in the 20s tonight
It got 31 last night.
I wish it would get warm and stay like that
Change-over rams
Hello from Bristol
Howdy from Texas
Jeff I'm going to recommend you to an long time friend in Texas that's thinking of building an community gaming center for not only the local community but the gaming community he is in the fort worth area I hope you don't mind .
Not at all. Thank you!
Putzmeister and alliance both send out pipe kits repainted
Yep, I’ve ordered from alliance before.
When are you gonna get me a pump? When can I start?
Lol nothing in the works at the moment
@@MuddyfeetConcretePumping get me the biggest piece of crap you can find I’ll run it and maintain it. Just has to have a good a.c so I can cool down after workin on it😂
Ain't you got no rock in Texas?
Sure we do
hi again t.Keke
Hello from Texas
lmao should see shit holes we work in nys
Jeff just reported an porn ad comment.
👍
Russia is watching
Thanks for watching!!!