Lathe Restoration - LATHE FOR EVERY HOME!!!
Vložit
- čas přidán 29. 10. 2023
- Table lathes for every home with small dimensions that meet the needs of every home. Manufacturer METALAC, Year of manufacture 1979. More than 150 working hours were invested in the restoration.
Support the Channel
Paypal: www.paypal.com/paypalme/peChoO
Ko-fi: ko-fi.com/pechoo7283
► Click HERE to subscribe to peChoO czcams.com/channels/2gV.html...
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
Instagram
/ handmade_pe. . - Věda a technologie
Remember to click LIKE and SUBSCRIBE to the channel, it helps a lot. THANK YOU. 🤗
What a lovely restoration. As a retired turner i would be more than happy to potter about on a great little lathe like this one!
Nice addition to your shop. Nothing teaches you more about a machine than tearing it down and putting it back together.
PeCHoO you need way oil for the slides not grease as it picks up metal shavings and wears out the way slides get an oil can with a small applicator tip so you press in the small ball bearing and apply the way oil 👍🏻
You can still use way oil and add it by way of the zerk fitting.
Gleitbahnöl
❤❤
Fantastic restoration. Credit to you.
Unglaublich was für eine Arbeit in einer Drehbank steckt, darum ist die Aufarbeitung Respekt für die viele Arbeit, die Menschen zuvor da reingesteckt hatten .Danke für das tolle Video.
I appreciate the use of screw drivers instead of using a cordless drill/impact for everything. The attention to detail was great to see and, the fact that the video was just showing the labor of love that went into the restoration without any voice overs was great too! Thank you for sharing this with us!
Posedujem metalac cakovec ut 120 i mogu reci da je strugic ODLICAN. Inace, super si ga sredio!
Welldone. Great work!!!
Looks great! You should be using oil instead of grease on the slides. Also, the contact surfaces for the carriage, cross slide, and compound should have been stoned instead of sanded or wire brushed. Or better yet, precision scraping to true the mating surfaces to each other.
Hi Very nice video and a restoration
Super proud of your workmanship. No one can appreciate work unless they know. And you need lubricant for the sliders. Thanks! 🎉🎉
You are truly an artist!
Love your work! You are a master craftsman. I don't know how you remember where everything goes back. Your workshop is amazing. Thank you for sharing. Cheers Ray Mann Melbourne AUST.
Seriously.....a perfect restoration! Beautiful job!
Nothing wrong with it to start with (pretty much), but now better than new. Super pride in your craftsmanship. No one could appreciate the work unless they knew. And you did it much like I would have done. On the change plate, I thought, he should laser that, and the next scene 🙂 Absolutely brilliant.
I agree, mostly. But the new colour fits not well. Why on earth babyblue?
Very good job...
Svaka cast majstore! Ne bi se svako navatao da radi ovo 😁👍💪
Fantastic restoration - great job. Well done.🎉
That is one funky bright electric blue color.
Excellent job on the restoration process. Looks better than new
All you have to do now is to strip it down clean all the grease off, reassemble and use oil to lubricate. 👍🏴
Такой «реставрацией« нужно заниматься всегда во время эксплуатации станка !
А про шабрение он вообще знает? Он же все плоскости завалил...
@@user-tp2zj4hr1eДа ничего он не завалил , полировальным кругом прошелся ...
На канале Леха технарь показано и рассказано как надо правильно токарный станок восстанавливать и модернизировать.
Это хоббийный станок и походу про точность речь не идет
А кто то знает модель станочка? Больно интересный.
Skidamo ti kapu Pečo. Prvo lajk pa gledanje. Svaka čast na videu. 👏👏 Samo snimaj i kači.
Nice refurbishing project. I like how you refinished basically everything and now can use it for a lot of other great projects too... Thumbs Up!
ovo ti na kraju dobro Metalac Cakovec ha ha inace dobra restauracija
Top-Super gemacht.
Great Job! It looks so much better and is going to be useful for your projects for years to come. Good color selection too.👍
I don't see any restoration, but rather a thorough cleaning of the lathe. The first step of restoration. Nice cleaning job.
Здравствуй, добрый день тебе хорошего дня, да молодец, очистил станок токарный от грязи покрасил. Просто молодчина.
Brilliant restoration!!!
Svaka čast. Kao nov! 👏
MM77 Approved 👍🏼👍🏼………………………………………………………………………WOW, excellent job! It may not have “ needed “ it, but now you know what you have and that’s a “ new “ lathe. AND it matches your other machines! LOL
нынче каждая чистка станка называется реставрацией)
Piękna robota.
Svaka cast brate 🦾
Εισαι τρελος!!!! Σε παρακολουθώ αρκετο καιρο μπράβο φιλε και λίγο είναι!
here's how to turn a lather into a garden sculpture, beautiful color
Браво Пешо.👍👍👍
Super! Danke!😍🤗
Wow, you performed a very exceptional masterpiece of beautiful work on this Lathe Restoration job. I admired the fact that you restored every single small detail on this lathe and didn't miss or overlook anything. It was very therapeutic watching you as a master restoration expert technician perform this job and you should be very proud of yourself and skills because this job you did was not an easy task to do, "SUBSCRIBED"!!!!
Great job😉
Nice work bro
Fantastic Restoration.
I have a very similar Maximat machine that was made in Austria. I like yours very much. It will serve you well. Greetings from Wisconsin.
beatifull,exelent
veramente un ottimo restauro. Complimenti!!!
Way oil not grease! Beautiful restoration.
Odličan posao, čestitam
Super ❤😊 úžasné !!!
Pa gde Bell-ovo ulje... e, šalu na stranu, super poslić i odlično odrađeno za kućne uslove. I ja bih jedan takav strugić u mojoj radionici.. 😢 bravo maestro!
En tant que tourneur fraiseur , c'est un très beau travaille de restauration . Bravo
Good Job
woow how nice is this !!👌👌
не плохой косметический ремонт станка, наждачными дисками чистить направляющие, за это надо по рукам на давать.
Нужен второй фильм о том, как автор следующие уже 500 часов провел всякие доводки, балансировки, выравнивания, снял люфты... Но это может не для домашнего обывателя. По рукам давать не надо, лучше добрым словом и советом.
NICE JOB!
Excellent work
Amazing at the level of detail you restorers have in being able to disassemble tools like that and get them back together. I'd be sh!t where's this part or ooops where did this one go.
My hats off to your sheer ability!
Complimenti!!! Un restauro eccezionale, tornio invidiabile...un saluto da Roma👋👋👍
Tu iznad glavnog prekidaca ukljuci/iskljuci bi trebao da stavis "pecurku" crveni taster za hitno iskljucivanje masine skroz. Da ti bude na udaru kolena otprilike. Samo bratski savet rodjo.
*Харош станок)*
Реставрация станка чудесная, но есть минусы такие как: не удаление ржавчины в некоторых местах; цвет станка не такой какой он был изначально( а это все таки реставрация); и вы сначала отчистили металл от холодного воронения, а потом нагрели металл до оттенка синего и остудили в воде резко из за чего прочность металла меньше чем была изначально. Если не считать эти маленькие минусы то реставрация класс👍.
EXCELENTE TRABAJO
Very nice 👏🙏🙌
nice job man.
Gostei muito de parabéns 👏👏👏👏👏👏👏
Never seen this model. The design appears to borrow a bit from the Myford 7, but with a fair amount of differences, too. Doesn't appear to have a powered cross slide, which is a bummer, but the t-slotted saddle is something that all small lathes should have, but too few do.
I can see a lot of very good work here.
Поздравляю отличное преобретение😊
Fantástico 👏🏼👏🏼👏🏼
Great job.
Muito bom!
Parabéns 👏🏼👏🏼
Great Job!
Superbe !!! (superb in English)
молодец разборкка отлично
Hello from Texas
Very nice!
muito bom ficou novinho meus Parabens
Bravo maestro Pechoo super odrađen posao e jebem mu oca očinja ako bi se i Anštajn bolje snašao u svim tim šarafičima.ja i moji prijatelji sa zadovoljstvom odgledasmo ovaj video komentar je bio "E al ga napravi svaka mu čast".Neka vide ovo oni yutubovski diletanti kako se to radi.Veliki pozdrav od old frenda Mileta iz REPUBLIKE SRPSKE živio.
Pozdrav za ekipu.👨🏭
Super Arbeit 💪🏼💐👍🎖️
Kao nov , kolko pare za njega.👏👏👏👌👌👌
Ima sentimentalnu vrednost😁
I love the fact he replaced the flat head screws with hex. HATE flathead screws!
Good job Guy ;oP
Super restauration ... je rêverais d'avoir un petit tour de ce type :oP
Bravo 👏
nice job!
please use way-oil instead of grease on your ways !
cheers ben.
super finde alles sehr gut vielen dank
Super robota 😃👍👍👍👏👏
Только это не реставрация а просто отмыл и покрасил
То же самое хотел написать.
good job .
show!
Dobro si ga odradio, lep dodatak radionici. A sad neku malu glodalicu da središ, znaš koliko će da ti otvori mogućnosti u novim projektima!
Use oil at the lubrication points and no grease!!
Bedway oil for example.
Otherwise very good work!
I wish you a lot of fun and lots of chips with your new old machine.
Bome taj strug i bez restauracije je u super stanju.
Extraordinario
You have made assembly mistake approx 34:25 min, both cross slide dial indicators you assembled backwards.
Otherwise a Beautiful restoration. Well done
Nicely done, it looks nice again. But disassembling, cleaning, painting, assembling, is not a restoration. There are dozens of these types of "restoration" videos on CZcams, but there is no real restoration involved. How about the play, the sag of the bed, the alignment from various parts, the alignment, the precision and so on... As far as I can tell, this is now a sexy looking lathe, which can still deliver poor results..
Restoring is, back to original with little changes and repairs of broken parts or making and getting new parts specialy the worn out ones..
If its precion is still not like the new, then it is just cleaning and re painting. Restoring a lathe is not that easy.
Building back to original specs is a remanufacture. Stripping it down, cleaning, repairing or replacing anything that needs it, then reassembling, adjusting for correct operation, painting and detailing is a restoration.
You don’t know if that was done or not, he might have done the measurements and alignments off camera, not showing such a boring and slow process in favor for a more simple video.
Great job, although I noticed that you installed the scale rings from the compound the wrong way.
加油=fighting👍👍
Haw mini nodes that wen he put the barring back on the check shaft it moved up it want give a true center. Nice paint job looks good
👋👋👋
my anxiety went up when you used that drill to sand the carriage. definitively not better than new. however it looks clean now