Patriotic Gnome DIY/4th of July Gnome/No Sew Gnome/Uncle Sam Gnome
Vložit
- čas přidán 5. 08. 2024
- This is a super easy Patriotic gnome diy tutorial/4th of July gnome. This is a no sew gnome tutorial. This is a great patriotic gnome diy for you home decor. This gnome is made to look like Uncle Sam. This is an easy diy gnome with legs and arms. You will learn how to make a gnome beard out of faux fur. You can sew this pattern also. My free pattern is included to use for personal use.
Supplies:
Pattern: (free for personal use) bit.ly/35I854L
Pattern with svg files: bit.ly/3DY8X3Q
Commercial license: bit.ly/3xhsXv4
Cricut - cricut.pxf.io/5bE2YN
Shoes - amzn.to/3OuMYaB
Chipboard - amzn.to/3NSKORT
Red Piping - www.joann.com/wrights-maxi-pi...
Pool noodles - shrsl.com/2w3a2 (Cut to 6” in length)
Sticks - - shrsl.com/2w3a9 - Cut to 2 - 6”. 2 - 1 ½”
Hot glue sticks - these are best. amzn.to/37ssFaN
Craft Foam - White - bit.ly/35LyrTk
Blue - Came in a pack - bit.ly/3j2yLow
Faux Fur - amzn.to/3qtpJlR
Wooden ball for hands - amzn.to/3yP2kQ7
Cork - 1 7/8” x 7/8” (6 needed)
Noodles for arms - amzn.to/3eiX5A0
Fabric - Red and white stripe - bit.ly/3vLc6Qr
Blue and white stars - bit.ly/2Ugf2r9
Felt Ball for nose - etsy.me/3qVbK8L
Glue gun - amzn.to/38ASvZF
#gnomes #diy gnomes #patriotic gnome
Chapters
00:00 Intro
00:23 - Legs
04:21 - Hat
08:43 - Body and Jacket
14:43 - Arms & Belt
19:33 - Beard & Collar
20:57 - Decorate the hat
Share the pictures of the gnomes that you are making by joining our Facebook group
Facebook Group link - / 897304637686709
Website: pattijgood.com/
Instagram: / pattijgood
Facebook Page: / pattijgooddesigns
/ gnomesbypatti
Pinterest: / pattijgood
Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase. - Jak na to + styl
Make sure that you don't have any fabric or faux fur under the hat, or it will not fit. It just slips over the noodle only. It is made for a Dollar Tree noodle. If you use a larger noodle, you will have to scale your hat larger. Thanks, Patti
He is adorable. I love him.
Adorable…Love this little guy 🇺🇸🇺🇸🇺🇸
He is Absolutely Adorable. Love love him. Awesomeness job.
OMG. !!! That’s by far the best gnome I’ve seen all year !!! What a great job you did… tyfs
I just love him !! Thank you so much for sharing your talent and ideas !! Cuteness Overload !!
He is awesome. Thank you for sharing with us. ❤️
Oh my goodness! Uncle Sam is too cute for words. What a FANTASTIC project!!!!! Many thanks for sharing.
Glad you enjoyed it! Thank you so much for watching.
i just love this guy
He is unbelievably cute! Thanks so much for sharing
Thank you Barbara. Have a great week.
Patti the details that you put into these gnomes are mind blowing. You are AMAZING. He is adorable. 🇺🇲
Thank you so much!
Love this gnome
Stooooop!! I love your tutorials!!! There's not enough time to make them!! Love love love!!
Can't wait to make him!! Thank you. Great video !!! 😊
OH wow I love this one !!!!
So dog gone cute Patti love him
I love all the gnomes you make! But I think this one is truly my favorite ❤
Thank you so much Kathy. He is one of my favs too.
You do the cutest Gnomes❤️ thank you for sharing 😍
So stinking cute, love him. Thank you for showing us how to make and for sharing your talent with us. Have a wonderful day.
Thank you so much Deanna.
Love it!
He is really cute, thanks for sharing him with us! You have so many good ideas. 🇺🇸🇺🇸🇺🇸
Thanks Donna.
This is so darn cute.🤩 Thank you for the pattern and tutorial. It's very much appreciated.
Thank you! 😊
I totally agree with Debi Avalar. & I love your videos. Thanks.
That's Debi Avalos.
Thank you so much Patty, that means alot to me.
Ms Patti another amazing pattern . Thank you for all you do for us .I love this little guy.
Thank you so much Catherine. I'm glad you like him.
Outstanding!
I love him Patti. You are putting the gnome bug back in me. Lol
Thanks, that's awesome.
That is adorable!!
Thank you so much Charma.
Adorable ☆Patriotic Awesome ☆
I have become a “Pattiholic”…………love your work and your ideas! Thank you. Looking forward to many more videos!
Awesome! Thank you! I really appreciate the sweet comment.
Soooo awesome he is so cute thanks for the video
Absolutely brilliant, you are so clever! Thank you
Thank you so much, I really appreciate it.
so awesome thank you
I'm not very interested in gnomes but I love this one thank you it just takes the right one
Thanks Kathy.
Amazing
Very cute
Patti, excellent job! You have the best gnome diy videos on CZcams. Such detail is put into each one. I love your gnomes as inspirations. The jacket is just perfect in design. And attaching the arms with a stick inside the body is an excellent idea. Thank you 😊 I look forward to your future gnomes
Thank you so much Debi. That was very sweet of you to say.
I was wondering when I was gonna see uncle sam you did a wonderful job 🇺🇸🇺🇸
Thank you Trish, I really appreciate that.
Great! 😍 so talented 💗
He is so cute!! I live the jacket and how precise you made it! Your so awesome! Thanks for sharing! 👍💕
Thank you so much Alice.
Sooooo cute
Patti
You did again you are so amazing,
Go Patti
Can't wait to start patti I made a fiesta Mexican old man its fiesta week here in San Antonio sitting down he came out cute bare foot.
Great gnome I made him he’s awesome!!
That's awesom Patricia, I am so glad you made him. Thanks, Patti
I am now making those too :) stinking so cute I love to make more gnomes and have lots of my gnomes in my cabinet :)
Patti where did u buy piping? Please let me know I tried to explain but they don’t know what I am talking about lol
I got it at Hobby Lobby. It is called piping bias tape. You can order it online, but it is more expensive. Joann's fabrics has it too.
Great video!! TFS!!
Thanks for watching!
Loved this Patti,all your gnomes are amazing😍😍😍
Thanks so much 😊. I have a lot of fun making them.
Great tutorial. very innovative using a pool noodle for the body. Just bought a noodle so I can give this a try.
Thanks June, I am so glad you are goint to make him.
Really cute Thanks for sharing Hugs
Thank you! 😊
Awesome, im try to do this. You are so talented. Love him 🧡💛💜💚❤💙
Thanks Bonnie.
I'm not American, but I want to make one now, he's so cute, nice job..
That's awesome. You can always modify him to match your countries flag. Thanks for watching.
Really Really Good......Has Always 🙂👍👍
OMGosh, my favorite. Made the Werwolf, Pumpkin Gnome, Frankenstein gnome, the Witchy Gnome next the Scarecrow gnome. The Werwolf was by far the most difficult because of the nose. I will make the Uncle Same and your Easter Gnomes in the spring. Want to make the Gnome ornaments wreath. A couple of years ago I started to make sock Gnomes and only sold a few. So, here is a different take on the sock gnomes. Thank you for your great Ideas. See if you can come up with a Mermaid Gnome. (I asked you already...but this one may take some thinking!) All your Gnomes are amazing. 😃
OMG Bonnie. I can't believe you made all of those. That is awesome. I will do the Mermaid, but I need to get through my holiday gnomes first. Thank you so much for the idea and for watching. I really appreciate it.
Wow Patti your gnomes are so awesome 👌 that I can't even believe it! Somehow you started this tutorial with a different 🤔 attitude Somehow. It seemed to me anyway. But then you turned into your old self. Lots of little specifics to this gnome. But you are always so 🥰 perfect 😍!
Thanks Linda, I will have to rewatch that one. Have a great week.
Love your videos. So glad you share them with all of us. Would you consider doing a video on how to cut the hat using a Cricut
Great idea June. I need to do that. I use the knife blade on the craft foam instead of the deep cut blade. It cuts it smoother. I also set it to cut more cuts, at least two. I will try to do a video on it. Thanks, Patti
WOW!! You are so talented I love watching your videos thank you. I know I have asked you this before but looking for a cat gnome.🐈🐈
Thanks Diana, I'm still working on getting my ideas for this one. Are you meaning like a gnome pet?
@@PattiJGood Yes please you are so so talented!!! I love your weber grill and also the lifeguard chair. Great!!💗💗
😍😍😍😍😍😍😍😍😍😍😍😍
Awesome!! My fave is how you did the jacket. Can I use your jacket tail idea for making a gnome in a tuxedo please?
Thanks, absolutely, use it how ever you want. Tuxedo is a great idea.
@@PattiJGood thank you so very much♥️
I love your gnomes. So cute! How do you make holes in your cork?
Thank you Linda. I drill them.
I use a red beer cup to make my hats just as same as ur pattern design
I can’t wait to make this. I was wondering if you ever use your purple, blue and yellow curling rods? If so which Gnome do you use them with? Or do you use them for crafts? You make a lot of cute things.
Thanks Linda. I use my curling rods on a lot of my gnomes. Different ones for different size gnomes.
Ok. Thank you for getting back with me. I really appreciate it.
I love any work that you come up with. Beautiful. Where do you get your corks. My sister ordered some from amazon and they are big and dried out. When you start to drill the hole they want to fall apart.
I have wine drinkers in my family. If you purchase some, order them on etsy and look for the synthetic ones. That is what I use. If you can't find them, you can use the hair noodles. Thanks, Patti
I love him. I was wondering if you were going to do 4th July gnome. I've been meaning to ask you where do you get your fur? It always looks so thick. Thank you, take care. Happy and safe 4th.
Thank you. I use this faux fur. It is thick. amzn.to/3qtpJlR
Thank you so much for the help. I will definitely buy from them. Take care
So cute. Do you use fabric hot glue or just regular hot glue and is it, low temp?
I use regular glue sticks. These are my go to always amzn.to/2SpTdFc I have tried the fabric glue sticks, but they just don't work well for me. These do not get too hot even in my high temp glue gun. Thanks, Patti
You are simply amazing. I love watching your videos and thank you for sharing all. Did you ever make the bride and groom? I think you said your son was getting married in June.
Thanks Gerry. I did not have time to make the bride and groom. My grandson gets married on Saturday and just ran out of time. I will make them some day. Thanks, Patti
@@PattiJGood Oh your grandson. Sorry about that. Have a wonderful time!! Enjoy yourself.
I love your gnomes, actually everything you make is beautiful. Where can I find the measurements so I can make one myself?
Thanks Marie. Here are the links for the patterns. Pattern: bit.ly/35I854L
Pattern with svg files: bit.ly/3DY8X3Q
I know this seems like a silly question but my pattern printed with some pages at correct scale but some at smaller. It appears this way in the file. can I fix it?
Are you printing the pdf or the svg files? All of the pdfs should have a 1" square to gauge by. Let me know. Thanks, Patti
Love it.. Where do you get the shoes from?
amzn.to/2YZaODm (they are parrot toys - you get 6 pair different colors)
*unfortunately I did not see that black are no longer offered, but you can use the white ones.
I did see black ones here, but you will need to confirm that they have a right and a left. amzn.to/3vKF3fd
What you do with all those gnomes once you finished you keep them sell them or give them away and how did you get into making gnomes
Judith, I sell them on Etsy and I give them to friends. I started making gnomes in 2014. I purchased a pattern on Etsy and made one. My first one was not very cute, I keep it in my craftroom as a reminder that with practice you get better. I was hooked after that.
Where did you buy the red piping for the jacket on the Uncle Sam gnome.
I bought it at Joann Fabrics - bit.ly/3b8L54Q. Thanks, Patti
He’s AMAZING! May I ask what kind of red fabric cord you used please thank you. Well done I’m gonna try . He’s fantastic!
Thanks Patricia. It's called bias tape piping. Here is a link www.joann.com/wrights-maxi-piping-1-2in-2-1-2-yards/prd34714.html
Thank you!
Hi Patti,How did you get the hole in the corks?
I used a drill. Thanks, Patti
By using the hair noodles for the legs instead of the corks, what would you use to weigh the tennis shoes down?
I use 5/16" nuts and put them in the toes. You can get about 3-4 in each shoe.
Thank you!
I would love the pattern and were do you buy the sneakers
Here is the link for the pattern and the sneakers. Thanks for watching. Pattern: bit.ly/3xIZGtY
Shoes - amzn.to/2YZaODm (they are parrot toys - you get 6 pair different colors)
What weight/points of chip board do you use? I noticed on Amazon there's 22 and 50 points I think it is. Or medium weight. Thanks so much.
Cindy, this is the chipboard I use. amzn.to/3jLZdSI. Thanks, Patti
@@PattiJGood you're too kind. Ty so very much
Hi Patti, I love all your gnomes vidoes and have made several of them. I have been trying to upload the SVG file for the hat. It will not load correctly, I have googled to try and figure out why but I keep finding same. I need to back to the maker of the pattern, is there anyway you can check your pattern. I am anxious to make Uncle Sam!!! I am going to be in College Station on Wednesday April 13, I would sure love to meet you if possible?
Thanks Sylvia. Try to pattern that says "revised" for the svgs. You will have to download them to your computer. I have made some corrections to it. Let me know if that works for you.drive.google.com/drive/folders/14iaR7mfR1P567cWSybSM3omYBoiQavKs?usp=sharing Thanks, Patti
Amazing.
Where do u get ypur corks at??
Thanks Melisa. I buy mine here www.widgetco.com/products/used-wine-corks-synthetic They are very inexpensive this way.
How did you get the hole in the cork?
If you are using regular cork, you will have to drill it. If you are using synthetic cork, you can melt a hole in it with the tip of your glue gun.
Can I cut on my cricut..?
You can cut the hat, that is the only pattern I did in the svg files.
Patti I sent a pm message we’re you able to look to see if you could share in an svg the other parts of the body. I only see the hat. Does anyone know what app or program you can use to convert files? Thank you all so much!
I only did the hat in svg. The rest of the files are in pdf that you have to cut by hand. I don't know of a program that you can convert pdf files to svg. You may look at Inkscape, not sure if they do or not. Sorry about that. I will try to do my newer patterns in both. Thanks, Patti
@@PattiJGood thank you Patti! My husband figured it out. Thank you, for doing that it helps especially in Circuit!! I appreciate you so much your gnomes are simply the best!! ❤️
What size corks do you use? Does it matter what size they are?
I really doesn't matter what size you use, I use 1 1/2 x 3/4". most of them work fine. Thanks, Patti
@@PattiJGood hi Patti, i’m in the process of doing the patriotic gnome and I’m having problems with the legs. My corks are one and a half inches long. The three of them seems to take up the whole 6 inches of the Dowel. Even if I use curlers what would the length be. Is it 4 1/2 inches.
@@kathydonoflio8425 3 corks at 1 1/2" should only be 4 1/2" Are you putting the cork flush with the bottom of the shoes? You can use a curler that is 4 1/2" long.
Hi Patti. Would you please add a link for the chipboard? I looked on Amazon but I don’t which one to order. Thanks.
Marci, I just added it. Here is the link to the one I use amzn.to/3NSKORT. Thanks, Patti
@@PattiJGood Hi Patti. What sculpting clay do you use for hands & feet?
I love your video’s, I’ve watched lots of gnome videos and yours are by far the best! I love learning from you.
Thank you for your hard work.
Marci
@@marcip7105 Marci, I use both Sculpey III and air dry clay. The feet are easy to make with the Sculpey, but the air dry clay is best for the hands. This is the air dry clay I use. amzn.to/3n7XyIZ. Just make sure that when you put the lid back on you hear it snap. It will dry out if left open.
I guess I’m alittle confused I have a cricut and downloaded Svg for hat but notice nothing for fabric so did the other one and noticed no measurements for fabric just 1x1 gauge I really don’t know what that means? If you could please help
Brenda, the svg file is just for the hat. The pattern for the jacket, pants, etc are a pdf that you cut by hand. Here is the link bit.ly/35I854L. The 1 x 1 gauge is just to make sure once you print you pattern, the square is still 1" x 1". Thanks, Patti
@@PattiJGood patti thanks for the quick response I figured it out I have one more question I tried to cut on my maker several times and cutting manually it just wasn’t a smooth cut any suggestions what I shoujb
@@PattiJGood I’m sorry pressed enter by mistake !! any suggestions on what to cut foam with manually?
@@brendaw5802 I change the blade from deep cut to fine point blade and set the cut to more. The deep cut blade tears up the foam.
@@PattiJGood I tried fine point with new blade won’t cut through so videos say iuse knife blade and can’t get machine to use it! Lol I wil try again alittle later! Thanks again for all your help!
Hi Patti! l made the lemon gnome and it came out AWESOME. l have a question? Have you ever made a Pineapple Gnome. started making my own gnomes in 2021 but l have a customer who wants me to make a Pineapple Gnome not sure how to even start this special request on a Pineapple Gnome so can you help me!
That's awesome that you made the lemon one. I have not made a pineapple gnome yet, but I do have it on my list. I would make his hat the leaves. You can cut them out of craft foam and make them stand up on top of his head.
Patti, I can't get the hat to fit My 2" noodle. I'm having to make it bigger. I did exactly like you said. I don't know.
It is a snug fit. It shoud fit as long as you did not put any fabric or faux fur under it. It should just cover the noodle. Did you get your noodle from DollarTree? Also, you can only overlap the hat 1/4" to make it fit. I'm sorry for the trouble, let me know. Thanks, Patti
Patti, can you substitute the Dollar Tree party Tree Shoes, add weights, the 2 corks, dowel rods and use the faux suede Cricut material and follow your pattern/ instructions like the police officer or the mechanic for Uncle Sam? Instead of the tennis shoes?
Absolutely you can. That would be great.
Patti, thanks for the quick response!!! You’re AWESOME!!!!
Do you have a pattern for a MIT like a chef would have
I don't Jodie. I will have to do one of those.
Love this lil guy!! I found the pattern but there are no measurements on them?? Please Help
Thanks Bethy. I did not have measurements on this pattern. You will have to print it to use it. Here is the link. bit.ly/35I854L. Thanks, Patti
Ty
Where do you get the little tennis’s 👟? 😊
I get them on Amazon amzn.to/2YZaODm
Patti, I just love your tutorials! Your gnomes are the best!! Can I ask which cricut you use? I am just starting out and I'm not quite sure which one is the best to start with.
Thank you so much Cheryl. This is the Cricut I use amzn.to/3D2kxfk it is the Maker, not the new one but the one before, but it does everything I need it to do.
How do I get the printouts for the Uncle Sam gnome?
Pattern: bit.ly/35I854L
Pattern with svg files: bit.ly/3DY8X3Q
@@PattiJGood thank you so much! ❤️
Sorry, did you say where to get your pattern ??
Here are the links for the pattern and the svg files Pattern: bit.ly/35I854L
Pattern with svg files: bit.ly/3DY8X3Q
Where do you have these patterns?
They are on my website at www.pattijgood.com. Thanks, Patti
I want to try to make one but the patterns don't have measurements n I can't print the patterns out I just have my cell phone. I love ur work
Which pattern are you needing measurements for? I can send them to you. I will start adding the measurements from here on out. Sorry about that. Thanks, Patti
@@PattiJGood patterns for the 4th of July , life guard, soldier , safari , ladybug, n the one sitting on the beverage floaty that's most of them off the top of my head. I'm really grateful for u working with me on this thank you Patti.
Give me a little time. Here is the link for the ladybug gnome measurements. drive.google.com/file/d/1v6uq7MUjVUiEJ3vccxVuOKPU5zAvxjkA/view?usp=sharing
Where do I find the pattern?
Thanks, I found it.
How do I get pattern
Robin. Here is a link to the pattern Pattern: bit.ly/35I854L
Pattern with svg files: bit.ly/3DY8X3Q
How tall is the noodle
The noodle is 6". Thanks, Patti
What another cute idea, I am having the same problem downloading the SVG Files to make on the circut machine like I did with the bunny pattern? Is anybody else having the same issue that I am having?
Try to download the new files I just added that have the word revised on them. Let me know if they work so I can delete the old ones. Thanks, Patti
I think I meant for the mechanic and the toolbox I am unable to download sorry about the confusion. Thanks!
@@PattiJGood yes I am able to upload it now that you changed it. Wonder why that makes a difference in the cricut design space? I can down load the images its the uploading to cricut design that is not allowing it. Can you do that to the mechanic gnome and his tool box? I would like to make it and gift it to my dad for his birthday. It is greatly appreciated doing that so I can enjoy using my cricut maker to help me make these wonderful gnomes they have such whimsical character to each one and bring happiness into the home. Thank you so much for getting back to me and fixing the issues so I can continue to make the gnomes. Love your videos!
Redown load the files. I just did a revision on them. Thanks, Patti
Where would I get tennis shoes at 4 him?😮
I bought them here amzn.to/3nvwU04 Thanks, Patti
Trying to get the pattern for this lil guy....says file does not exist....
Connie, here is the link to the pattern. bit.ly/35I854L Thanks, Patti
Are you cutting those thin little pieces of strips around the hat so straight
I used a paper cutter.
Where is tje printed pattern
Here is a link to both the printable pattern and the SVG files Pattern: bit.ly/35I854L
Pattern with svg files: bit.ly/3DY8X3Q Thanks, Patti