How to paint a bike camo in your garage!
Vložit
- čas přidán 6. 09. 2024
- This is how I painted a DIY Camo pattern on a Bike in my Garage at Home!
𝙎𝙪𝙗𝙨𝙘𝙧𝙞𝙗𝙚 for Best Results: bit.ly/Subscri...
---SPRAY GUN SET UP---
-Spray Gun: amzn.to/3bAYQoq UK: amzn.to/2x5Y6IQ
-Air Compressor: amzn.to/2x3y60L UK: amzn.to/2KvzDzA
-These Paints: amzn.to/2rzMhnc UK: I dont see them for UK?
-Frisket Masking Film: amzn.to/2rsWTV4 UK: amzn.to/2zsG7xb
---SPRAY BOOTH---
Centrifugal Exhaust fan(important for fumes): amzn.to/2xSqVJ5 UK: amzn.to/2xSJq00
Ducting: amzn.to/3cEZotm UK: amzn.to/2zkuDLS
Filters: amzn.to/2VQFGE9 UK: amzn.to/3eKkwA9
Plastic sheeting: amzn.to/3auUaif UK: amzn.to/3azjy6F
Built Your Exhaust Box ;)
----SAFETY FIRST----
-Respirator for painting: amzn.to/3bAUUUG UK: amzn.to/2VQxweZ
-Filters for Mask: amzn.to/2ShRU87 UK: amzn.to/2VRsGhD
-Nitrile Gloves: amzn.to/3ax7GSH UK: amzn.to/2Y1yTKr
-----Camera Gear-------
Camera Gear all in one place (US only): bit.ly/filming_...
UK Camera List:
On Bike Camera amzn.to/2xhQ7bT
Secret Mount amzn.to/2z0k9kV
B Roll Camera amzn.to/2Rz3Di5
Studio Camera: amzn.to/2VugtAB
Studio Camera Mic amzn.to/3cfGtoI
Get EBD Gear: bit.ly/_EBD_Gea...
Riding Gear: bit.ly/Riding_Gear
--------Host info--------
Dustin Klein: Is a Working Artist, Lifestyle Cyclist, and Maker. In 2000 a job as a bike messenger fell into his lap forever altering his path. Original Mash SF rider, Founder of Cadence Collection and Fast Friday. DKlein now creates movies right here on CZcams with his Channel Everything’s Been Done.
New Episodes Thursday’s at 1pm PST / 4pm EST / 9PM GMT
Instagram: bit.ly/DkleinIG
TikTok: bit.ly/DK_TikTok
LinkedIn: bit.ly/Dklein_L...
Strava: bit.ly/DkleinSt...
Facebook: bit.ly/Dklein_F...
Permanent Markings: bit.ly/Permanet...
Personal Site: bit.ly/DustinKlein
Email list:
bit.ly/EBDgear
Let’s go over all the steps necessary to paint a bike Camo in your garage. From prep to which paints you need for the perfect diy Camo paint job. Simple Spray booth set up and which paints are the easiest to use to get the best diy Camo you can in your garage.
📲Shall we Instagram?: bit.ly/DkleinIG
Just if you want an advice, next time that go paint something on you garage, sweep the floor like you did, but after that get the floor wet, so the particles of dust are not gonna flow around, I'll be safer.
That's what my old school teacher told me that he used to do to paint cars.
Peace
YES! That is great advice. I had not even thought of it. Thank you for taking the time to spread a little knowledge.
You went way more hard core than anyone I've seen. I just lightly sand then wipe down the frame and fork, but the Krylon take can camo paint and totally free hand it, adding two layers of ultra flat clear over the top. You did a great job, I'm super impressed!!
For paint stencil material use either Gerbermask or Controltac. They are made for this type of application and do not leave any residue when removed.
Player! Good looking out on these. Thank you!
This is my favorite video series ever. I love hearing your process and love the honesty you put into these videos. These videos/projects are so inspiring. Only thing this one lacked was some Bongripper.
HELL YEAHHH
Put another two layers of matte clearcoat on top, then sand THAT down evenly, then put another layer of matte clearcoat on top of that, you will have a smooth surface and all the layers underneath!
you can use another fresh sticky tape to take of the residues of glue from a ( sticky ) tape. It works great and you have not to deal with a liquid and probable smearing. Just tap it repeatedly on the places with the residues. The tape will take it off. This works on any surface, also to remove glue residues from stickers on plastic containers for instances.
I hope your getting some kind of reward for all these videos. I can’t imagine the work that went into this one. Super informative super positive attitude. You’ve got style
No awards Im just a little crazy, and I like sharing what Im doing with rad people like your self! Thank you for the support, honestly its what keeps me going.
Or instead of building all that ventilation equipment, spending all that and doing all that stuff you can simply paint in your garage with the door open or paint in your backyard. Plus they sell spray can or aerosol paint that is pre mixed way more cheaper than buying a spray gun and compressor. They also sell clear coat in aerosol cans. The one great Idea that I liked was the making of the stencil for the camo pattern.
I learned new stuff. Thanks. I parked at a rack next to a paint job that made the lightweight frame look like unpainted rusty dirty steel. I still can't figure out how the artist got that specific look even though I had already seen a video on how to make an expensive bike look old and worn.
I’ve painted my firearms in the past with This and I’ve been wondering how it would work on a bike! Awesome that I found this vid, bro!
Respect for the patience u got for getting the project done..congrats man!
Crazy how much effort you put in to preparing the surroundings. Compressor, right Air flow, Ventilation, plastic booth.
When I sprayed my bike I just bought some cans got outside and sprayed
But it also doesn't look as good as yours
Excellent video, thanks for putting this together! Rattle canned my old aluminum frame as a project last summer, and felt the same about it being a long process. Turned out nice but dry time was super long and it's not the most durable paint, so I'm envious of your choice! Camo looks great
Stoked you painted your own rig. Such a satisfying thing to paint your own bike.
For a non paint booth this is a good solution and well done all in all! I love painting bike frames! Great result.
This is awesome. I've never seen a video that explained the painting process so well. I finally feel like I'm ready to tackle the paint on my old Fuji Track, which has the worst factory color scheme I've ever seen (plus 10 years as a neglected city bike, locked to posts and whatnot).
Hell yes!
I knew a guy who used different size corks to block seat tube, steer, etc it also works well.
Thats a rad idea!
iv painted 3 bikes now, all done in my living room and all with spray cans 1st one looked good till i clear coated it a bit shit, 2nd one was a lot better but still some drops here and there but my 3rd good at a frame turn out mint, and i only spent about £15 on paint for it.
but nice work man dont like camo my self but turned out nice.
Killer work! Tackling my own project but using spraybike as BK apartment space doesn't really accommodate a spray set up. Actually matching a fork to one of your ritchey stems!
I am grateful for my space that is for sure! Would love to see what your end up coming up with.
Much respect, yet i preffer the look you get when submerging in there oil baths where the colors dont mix, like you do with guns
like this sht czcams.com/video/C7gdbePKIMM/video.html
You could try to sand it with grid 3000 and add another layer of matt clear coat? I do this a lot with scale model cars.
This is a great suggestion! thank you
So cool! My first frame paint job… well, my only frame paint job.. turned out bad.. epic fail! Can of krylon or whatever, and some pin stripe.
Thank you for diying this even though your channel is cycling. My channel, is directed towards adventuring, but I want to do maker diy stuff.. not sure that I can do both on one channel. Bikepacking one video, epoxy diorama the next video… probably not niche enough. But doing this diy on your bike… excellent… that and your talented!
Can highly recommend using spraydotbike. Powder coat in a can. Super easy to use and great fun.
Cool looking frame dude. Respect from the UK.
Much appreciated
Hats off for the amount of effort you put into it my friend. Great job.
Thank you my friend!
I just want to paint a camo. Seeing this made me threw all the stuff i should paint.
check out my paint job: czcams.com/video/ANzqachHNz8/video.html i used spray can and resoult are nice, much easier then using stencils
@Sma 556 thanks i take idea from guys spraying riffles and guns, there is lots of videos they do crazy good looking stuff, it was my first time and it was easy of course its not perfect but for ammount of time i spend 3 hours i think its best way to paint camo
I like the way you go straight to your goal. I have the same project. But something doesn't look good in the final result, the lips between layers are really visible, I do not want to have the same problem, could it be the wrong thickness of your decals or to many coats of paint ? I also noticed that you didn't put a coat of varnish, this could have fit the gaps of layers ? I understand that for a first try mistakes happens.
Looks really good, why didn't you just get the ready mixed camo paint, it's usually next to the tartan spray paint?
Kudos on the cerakoat doing it on a handgun is tricky you did it on a much bigger scale
I am definitely going to try this out, except on the rub rail on my little homebuilt boat. Love the look of the gradient.
Love that! Oh man that is going to be one fresh looking boat.
This video was really helpful the watch for my painting project. I was just wondering if some one could repost the link to find good como stencils. Thanks 🙏🏽
Make sure to drain the water from your air compressor once in awhile
You have lots of patience building and testing your paint booth. I also like that you made a step list. All good smart habits. So what did your buddy say about smoothing out the ridges from the layers of paint? How long did you let the paint cure before spraying the clear coat or coats?
You're amazingly tenacious, and thorough. I thought camo would be easy...NOT!
I did too, Or at least easier then it was. It was straight forward just lots of steps. Stoked I did it though.
Great Job! I would never have the patience to do that. Not even a single coat.
Damn dude you went DIY-balls-out on this. Great work.
HAHAHhaha This is somewhere between DIY and Pro..Prosumer all the way.
I have to say I don't know if I could commit to it for fear of ruining the frame. You definitely did a great job.
Well done bruh you sick
Hi Dustin! thanks for the video! i could not clearly understand what your friend said on the phone, did he say YES you can sand it? and could you tell me specifically what kind of final cleaner you have been using? maybe a link to the product would be appreciated a lot! sorry to bother and thanks for the help!
Basically because of the Paint that I used(which has a hardener in it) I did not need to sand it down. There is a bit of texture to this day between the layers but I actaully like it.
To make it smooth you would have to use a different paint and then add a clear coat over top. Hope this helps!
@@EverythingsBeenDone thanks Dustin! I´m doing my first steps with Spray.bike paint and I use a clear coat over it on top, seems to work fine. I was still wondering what the final cleaner product is in the end of the video? cheers
I want to paint my bike World War 1 Lozenge camo but its a daunting task and I need to make or find a stencil. Any ideas where I might find them ? Good job.
You should give it a clear coat to protect it more and bring out the shine.
Duracoat paints say the don’t require clear coat. Plus I was feeling the matte vibe 🤷🏻♀️
Dustin, I’m in the process of painting my bike using rustoleum camo paint. I know it will not get the same result like yours, but wondering What did you use to dry your paint, did you leave it for few days or weeks?
See what the can says for cure times, I would follow that. Would love to see it when your done.
Very good but difficult for neophytes. But like Aristotle said good is what is difficult. Next time show the complete bike please.
Wow bro, your patience is impeccable! Great vid!!!
Holy Shit....even if i don't like camo on a bike , that's an amazing job ! I have to say i'm from Europe and we don't wear Camo all day and run around with Guns like you do.....;)
My Order of the Hook EXT Steel really messed up because there was a fuck between the Distibutor and the Bikeshop but thank devil i found the LAST Frame in Small in whole Europe !
Will get it on Friday...hopefully...
I am curious how you will build up that beauty then......I go for a mix of Force and Rival 1 x with Hunt Wheels and Gravelkings and Ritchey Parts of course...
Cant wait to get this thing rolling...so close!
That’s looks sick!
Fella at our shop recently took a Ridley x-bow in minion yellow (as standard) and did a custom paint job, in like Audi grey
Looks so rad!
Sounds amazing!
Dustin Klein trying to share the before and after images with you but can’t on here
Camolicious. Can’t wait to see the build!
ME tooooooo!
Nice! The end result is great.
Thank you! Cheers!
Watched this video a few times now, so dope and I love your attention to detail.
Respect!
Great video; in terms of the amount of time taken preparing the frame for painting and then painting it, applying stencils and the like, would it have been more cost effective to get a professional frame painter to do this job?
Your missing the point. It’s not the journey. I am a maker.
What compressor did you get? And what spray gun? Any info for your setup would be appreciated also.
Oops! Just seen your links in the description. I should think before i type... appreciation.
Awesome paint shop set up , and that Bombtrack frame and fork looks amazing ; a true work of art .
AS ALWAYS, YOU ARE A WIZARD WITH ALL OF YOUR WORK! The result was marvelous,bigups!
Player! Truly appreciated!!
This was a cool project and the result looks great!
I've been wanting ro repaint my own bike but have also been met with early resistance, because I've never disassemble a bike before. Thanks to your video and a few others, I think now I can overcome that resistance. I just have to remember my hatred for my bike's current color 😂
Turned out great, but where is the link to the stencils?
It'd sure save me some time with an exacto knife. 😀
I genuinely don't know why I haven't subbed to you until today. Your videos always pop up in my feed and I always find myself watching them when that happens. That Bombtrack is hot as fuck- good job my guy!
Hi, Dustin. Congrats with the result & thanks for making this video. PS I can see you love typography, so if you will, may I ask you about cholo type that you use for "EVERYTHINGBEENDONE". Is it a font? Thanks and good luck?
How is the Bombtrack holding up with the paint? I've been seriously thinking about painting my next bike the same way, only in Swedish camo, because it looks cool.
The paint is ROCK solid! very impressed with it.
@@EverythingsBeenDone I'm even thinking about painting my motorcycle in that stuff and doing a full tear down during the winter. I must be insane.
I'm currently painting my Domane in Kryptek OD green Durakote camo. It's all your fault.
Name droppin' Lucas Strain! Most baller🤘
Name droppin and pullin him in for knowledge. Is there anything he cant do? ;)
nice bike sir hope someday I can built that
I hope so too!
I want a garage to do projects :(
That frame looks absolutely amazing! All that work has certainly pated off! I could never do that. But thankfully, I've got some of your DCO decals. They look amazing too!
so after you clean the surface with goo gone.. do you sand it??
and do you use any clear coating paint for finishing touch??
nice project btw..
Frame reflects aspects of you...schwag, v.cool but understated and always unique. Nice work....
Humbled!!! Thank you.
Dustin Klein
Totally welcome. Always look forward to your videos.
This is freakin amazing. Really looking forward to seeing this bike built up and more importantly, hear your thoughts on it, thanks for sharing man
Oh man cant wait to see this thing built up too!!
Very cool! Now I understand why you painted my new stem! It’s totally sweet btw!
That stem tho!!
Great Video Dustin! Wish more folks did this type of video! I am going to do a complete repaint on my bike. How much did this setup, equipment and paint cost you? I can’t find any info other than me taking the time to spreadsheet it but could you provide a ball park figure? Thanks man!
Great! Your black eyeglasses are fire! 🔥.
Thanks player!
Corecto trabajo,(sino te importa meterle medio kg de peso en pintura a un cuadro de carbono)Sigue practicando
Are you going to do a finished bike video? I would love to see what the completed project looked like!!
I will still waiting on the finishing touches of the build...its a long process.
Dustin Klein I feel your pain, I've been building my first 29er and due to various mishaps it's taken nearly two months! Hopefully the last of my parts should arrive today.
What p.s.i do i need too have on my compressor to spray with a gun.
as low as you can go around 40-75ish(each set up is different) but its best to test on a piece of cardboard before you start so you can dial in the pressure.
any progress on camo commotion stickers, so we can do it the easy way?
working on it day in and day out ;)
@@EverythingsBeenDone maybe you need some financial incentive... name a price... ;)
Great job with this video Dustin! I love the phone call :)
HAha I figured Lucas would know what to do. Thanks for the support!
Nice paint job Dustin! I recently did mine in a urban camo. Such a striking look. I have a quick question though about sanding of the levels or lips of all the various layers between the camo stencils? I couldn't quite make out what Lucas said about this.
IF you sand you have to clear coat. The paint I used is a all in one and doesnt need a clear so I just left all the lips on there. I think its kinda cool gives it some depth and character. Would love to see some images of your paint job!
Dustin Klein I guess the worry is you may sand too much paint away and ruin the effect. I've got some steps although not too pronounced. What your email I'll ping you a few pics.
I love seeing the process, and thank you for sharing! Do you have any detailed photos for us to oogle at?
Thanks player. There are some detailed shots on my IG: instagram.com/dustinklein_/
High quality work! Nicely done.
Thank you!
Hi Dustin, that was such tremendous task you did and looked so awesome. Looking at the video, I observed that you did not remove the original layer of the paint that was on the frame and I have a question related to that, I bought an electric cycle a week ago, however I would like to custom paint it, is it okay to paint over the original paint or not? And any other tips you may want to add would be helpful too. Thanks in advance :) Keep doing the great work. Love from India
The great about finish work is , If ya mess up, you always start completely over.
Great vid again Dustin! You didn't track your spray job on Strava!! Duh!! ;-)
Youre the one I am looking for, I hope that you are here in the Philippines and have this done to my bike frame, but I am wondering how much it would cost me
That’s is so freaking awesome, you did a fantastic job!
Link to compressor is no good. What compressor are you using? Thanks for future info!
I got you. Just updated the compressor link. Thanks for the heads up!
Good job, I like your perseverance!
Thanks player!! Slow and steady.
Hi! I'm planning to paint my bike what type of "Goo Gone" did you use?, and what did you use to remove the residue. I hope you can help me. Thank you :) Nice vid man it helped me alot... (I'm just 15 this is my first time painting my bike)
interesting project! hey, I`ve got to ask, how much does the paint weight, like before after frameset weight?
Damnit! That is an awesome question! I didnt even think about that. I wonder if we could find the weight of the frame online some where?
h-h)) maybe you can contact your supplier, but it would be truer or more relevant to weight the same frameset with the same scales or what not))
yeah, it looks like you`ve had enough on your hands allready, precision and time framing often cuts unnecessary steps, it`s not like it`s that lightweight of a bike build for weight to be a target, it`s just curious due to that many layers and this technic how much does it really add up.
Dude that is one super cool paint job.
Just ordered a shirt with your Pure Elation graphic! Great video, can't wait for the shirt
YESHHH
Awesome job dude!! I'm planning doing an awesome job on mine!! Just the choices of design ideas 💡 👌 😀
That turned out super cool.
Thanks for sharing this video Dustin! I am planning on of painting my first bike (solid color nothing fancy) and trying to decide on a good paint to use. How is the Duracoat holding up on your bike? Would you use it again? Whats your update? Thanks!
Duracoat is by far the easiest paint I have found for painting bikes its one part and dries rugged AF! its a bit spendy but strong. PS unfortunately I am not sponsored by them.
@@EverythingsBeenDone Looks sweet!! How much paint did you purchase for the job? Looking at website they offer many different selections and options. Any tips here? thanks!
it looks good but geting new one is more ez !!
You are so skilled dude, keep up the work🤗
Much Respect!
Good job Bro..I loved it. simply awesome...
I’ve been waiting for this one! Big ups from a fellow camo connoisseur
Camoisseur ;) love it!
Dustin Klein YES!
Sweet paint job Dustin.
NICE Job!!!!
Best Regards from BRASIL!!
YESHHHHH
Why u no paint with clear coat? smoother finish mate.
Duracoat is a clear/paint mix it doesnt need clear.
Dont get me wrong thats a top job and its done the way it supposed to be thats the right way.but i would've just went out side and saved some time and money
Blood splatter sheeting :D
я фанат Бомбтрэка))) Im a Bombtrack fan))) Ukraine)
Multicam awesomeness!!!!!! amazing both bike and both camo :DD
Holy hell, this is so sikk. Well done sir.
Thank you player!