Nissan Micra Jacking Points & Wheel Sticking to Hub

Sdílet
Vložit
  • čas přidán 21. 03. 2023
  • website:- www.vehiclemaintenanceandrepa...
    When we do not remove our car wheels after a long time, this could happen, enjoy the video, thanks for subscribing, give the video a like and I would like to hear from you in the comments section below, until next time Safe Motoring.
    Gary
  • Auta a dopravní prostředky

Komentáře • 5

  • @SeanBZA
    @SeanBZA Před rokem +2

    If it really is stuck simply put the bolts back, turn a turn out and put on ground, then drive 5m back and front. This normally will get them loose.

  • @shauny417
    @shauny417 Před rokem

    Hi Gary could you please guide me in changing my tappet cover gasket on my vw citi golf 1.4i 2009 model....I bought a rubber gasket by Goldwagen ....your insight will really be appreciated.

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  Před rokem

      It is really straightforward, you have to remove the 8 x 10mm head nuts, and any pipes attached to the tappet cover, then lift the cover off the head, clean off the old gasket, then reverse the procedure with the new gasket in place, good luck, I hope it all works out.
      Gary