Меня удивляет то что людей вообще не смущает что их называют при каждой сварки подшипника долбоёбами и дальше выкладывают видео с этой чудной операцией
Some of these are pretty amusing. The time it takes to fabricate those gadgets for clipping bits of slender rod into shorter lengths would allow you to make a lifetime of cuts in the same material with a grinder and cutting disk.
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
the guillotine made from an open ended spanner won't work for long as the fixed blade the spanner works against is only mild steel. i suspect the rod being cut is very hard and brittle to snap like that. i would think a mild steel rod would bend upwards and not be cut.
The concepts are all awesome but so many problems with assembly. I was sad watching a bearing get welded.. especially since it was a sealed bearing!. For that application an oil bronze bushing would work fine.. even just a regular bronze or brass bushing. Never weld on a sealed bearing. One you burn out all the grease inside (notice the small time it was on fire) and also, the weld is not going to hold. Bearing races are high carbon hardened steel. They do not weld very well.
Amazing diy tools thanks for sharing
Замечательно, спасибо! 🙋
Buenos días hermano excelente herramienta gracias por enseñar desde Venezuela Carabobo Ali Molina bendiciones 🙏
Привет Мастеру благодарю за видео зачёт вам...,,,
Wow brilliant idea great sir thank you for sharing.
Olá
Projetos muito bom. Excelente
Also visit my chanel brother
Thank you very awesome ideas I will try some thanks👍👍.
BOM TRABALHO MESTRE . ÓTIMO VIDEO, 👍. 🇧🇷
Very interesting diy...useful tools and i will make it for my workshop..thank you..regards⚘🍻
Best idea, thank you
Nice video, thanks for sharing it :)
Good job friend,waithing next video
Very professional work, Thanks my friend, Big like ♥️♥️♥️♥️
Muito profissional . Top demais!
K KK KK KKN njjkkknnkk JJ JJ JJ
Thật tuyệt vời chúc a sức khỏe và thành công trong cuộc sống
The third hand tool seems pretty good quality design. If you happen to have the materials like a random 100mm? ball bearing for a base weight.
Меня всегда удивляет, как вы умудряетесь подшипник приварить к железу?🤔😂😂😂
меня удивляет в этом видео вообще почти всё...
Меня удивляет то что людей вообще не смущает что их называют при каждой сварки подшипника долбоёбами и дальше выкладывают видео с этой чудной операцией
Wow! All these tools are useful 👏
excelente ! thanks
Wow nice tool
God bless us 🙏
Great innovations! But please ensure you practice SAFELY procedures...like
Wear gloves
Don't remove safely guard on grinder
wow amazing talent im really enjoy for watching
I simply love your video style, truly refreshing and creative.
Great job
Some of these are pretty amusing. The time it takes to fabricate those gadgets for clipping bits of slender rod into shorter lengths would allow you to make a lifetime of cuts in the same material with a grinder and cutting disk.
it turns out well, it's a pity that I don't have a lathe and a plasma cutter , class
i like this video thank you for sharing it to view and i wish your channel more successes
Блин,да тут все годное.Подписался и палец вверх поставил.Продолжай и дальше бро!!!
sat vụn qua bàn tay thợ thì tuyệt vời
Chia sẽ hay 👍🏻
あなたのアイデアは素晴らしいです。参照してもよろしいですか？
Very beautiful and best
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Гениально и просто...
very good idea
Very nice 🙂👍👍
Buenos días amigo, podrás hacer una maquina más robusta que se pueda romper fierros de 5/8.
Interesting stuff but make a tap wrench and way to hold steel on table when drill it
Mantap bos ku
Good ii boss 👍👍😊
انت مهندس رائع
the one with the drill nice
Mantap bosque👍👍👍 salam kenal
Good job
Good works❤❤❤❤
Bravo 👋👍🏻
Muy bien hecho
2:34 😮 oh my goodness, will try at home
Super tare.
the guillotine made from an open ended spanner won't work for long as the fixed blade the spanner works against is only mild steel. i suspect the rod being cut is very hard and brittle to snap like that. i would think a mild steel rod would bend upwards and not be cut.
При просмотре подобных видео в голове сама собой начинает играть мелодия "would i give"...
It's magic ❤
В любой непонятной ситуации приваривай подшипник))))
👏👏👏.....👌👍👍👍
Гибочные и режущие инструменты из лома сделанные благодаря сварке.
Goodvideo
Good 👍😊
good find
Mantap👍
Век живи век учись.
Muito bom.
Que tipo de óleo você usa para furar metal
Exellent
أنت عبقري رائع
Make a hidraulic press using hidraulic car jack.
mantap bang
Thanks 💐
Goodddd
👏👏👏👍👍
Ide brilian para tukang
Great
The concepts are all awesome but so many problems with assembly. I was sad watching a bearing get welded.. especially since it was a sealed bearing!. For that application an oil bronze bushing would work fine.. even just a regular bronze or brass bushing. Never weld on a sealed bearing. One you burn out all the grease inside (notice the small time it was on fire) and also, the weld is not going to hold. Bearing races are high carbon hardened steel. They do not weld very well.
Workplace health and safety has left the chat 😂
Доктора в студию😅
I like
Merci pour tout
Genius
Ну кто варится к подшипнику? Тут и обойма в самый раз подошла б.А так идея хорошая из за малого радиуса на углах.
Поделки из разряда,пусть будет потом сдам в чер.мет.
Werygood
👍♥️🙏🙏🙏🙏🙏
Наглядный пример, как потратить кучу времени на изготовление "инструмента", который служить будет гораздо меньше времени, чем его создавали😂😂😂
Его видать в детстве проволочки обижали.
К Доктору его!
Ты это..за всех то не говори!
Обратите внимание на его руки !!!! Ему 52-54 года а это большой опыт и навык
в любой непонятной ситуации- вари подшипник !
Okay ❤❤❤😮😮😮
Every professional working
Without tempering it will cut about 10 pieces and be destroyed
👍👍👍👍
В любой непонятной ситуации приваривай подшипник и делай режущие кромки из стали пластилин 3
👍👍
Tambhn utk ukuran itu yesss
Goods
Good
Like
Может и ничего но все эти приспособы очень специфические узкого направления. Много кто делает и катанки скажем арматуру?
имея сверлильный станок,плазморез делает палку-копалку....
👍👍👍👍👍👍👍👍👍👍👍👍
smart-ass video where not everything is shown making the device 👇👇👇
❤ OK
молодец
После того, как этот молодец приварил железяку к поджипнику я точно понял, что он гений