How to Assembly Progressing cavity pump Diamond DN
Vložit
- čas přidán 22. 08. 2024
- Assembly Procedure for Progressing Cavity Pump Novarotors Diamond Series, Type DN40L1.
In this guide, you will learn how to assemble the pump with the motorization already mounted. We will cover the assembly of the transmission shaft, rotor, and the mounting of the stator. This procedure is specifically for the DN40L1 Diamond Series monoscrew pump. But can be applied to major part of pumps Diamond DN-JN-FN series
Good luck
I like this working imo pump rapier
Thank you! I'm glad you like it. The IMO pump rapier is indeed a great piece of equipment.
Hola, Buen dia, me podrias decir que usos tiene este tipo de bomba y que altura alcanza. Saludos.
Our progressing cavity pump are use in various sector from oil and gas, waste plant, paper palnt, food grade sector like winery Olive oil and caseary sector.
I sugeest to see our brochure at page linked here www.novarotors.com/es/category/es/aplicaciones/
About second question. Depending from the flow . the pump arrive from 5 to 8 m. suction
Hello, thank you for sharing this excellent video! What is the oil you are using?
Hello! Thank you for your kind words. The oil we are using is different dependig is is food grade or note If you know the type model of pump send us a message by e mail and will reply to you. If you have any more questions, feel free to ask!
Tropo oleo campana😊😊😊😊
Sí, efectivamente, durante el montaje el operario derramó un poco de aceite porque quería asegurarse de haber llenado bien el manguito con el aceite y no prestó atención al hecho de que lo estaba derramando.
Hello, sir. I want to ask. what key is used to open the rubber which is tied at the shap join?
a simple flat-blade screwdriver
how to calculate GPM?
@@icawijaya9217 what do you means GPM (gallon) for you?
It's depending from the pump size
If you need to know the flow, whatch the brochure in the website of novarotors
www.novarotors.com/wp-content/uploads/2016/10/NR_BCH_EN_002.pdf
Remeber that
1 cube meter hour [m³/h] = 4,402 867 539 302 5 Gallon (fluid, US) per minute [gpm]
thanks very much. the answer is very helpful. I will continue to study my work. relating to the novarotor pump
what is the type of the sensor that was mounted on rotor and what is its function
It's a pt100 or a thermocouple maybe. They are used to measure temperature.
The sensor mounted on the rotor is a Pt100 probe. This type of sensor is used to detect the temperature between the stator and the rotor. In the absence of fluid, the friction between the parts generates heat. If this heat becomes excessive, the Pt100 probe detects a high temperature. When connected to a temperature controller and the motor, the probe allows the pump to stop within a few seconds to prevent damage from overheating.
So, the primary function of the Pt100 probe is to monitor the temperature and prevent overheating by stopping the pump in case of anomalies.
There is no sound.
There is no sound because the background noise was removed, and adding music didn't make sense since it's a simple assembly video.
Non