hello bro..I own w124 m111 1994 year meqanic transmision 2.2L..and mine relay sometimes do not works..if I push left or right on this relay with my hand its working..I opened and visually its good looking-what the metter if you know?
In the gray box there are 3 relays 1for wipers 2rear window heater 3for signal lights what I did is delete the signal relay and put one out of the box from any other car with a Flasher relay for 5 bucks it's worth it did this modification 5 years ago and still flashing perfectly
@@visionlink2012 probably the relay not good. try this put 49 and 49a together and select left or right the signal the light should stay on permanent if it stays on its definitely the relay
CREATIVE FIX.WELL DONE
E and I are looking for some of
Thank you Sir...you saved my day...👍👍👍
How did he save your day what was your problem because he sure as he'll never said what his was and by doing what he showed what he fixed
Thank you
hello bro..I own w124 m111 1994 year meqanic transmision 2.2L..and mine relay sometimes do not works..if I push left or right on this relay with my hand its working..I opened and visually its good looking-what the metter if you know?
Hi you'll have to check the voltage from the signal light switch on point 49a when you switch to left or right you should have voltage
You have test video? Do you leave the wires for those points connected?
Hi yes just as is works fine no more slow flashing or on permanent on cold weather
What is the positive wire of this ?
@@mohamedfiraz7041 number 30
I have problem w124 200D low light in the night problem..
@user-qg1qu3zw3q Hi you'll have to measure mostly its a ground issue you can try to add ground and see if it helps greetings
Se mon père 😅😅😅
Is this the Relay ??
In the gray box there are 3 relays 1for wipers 2rear window heater 3for signal lights what I did is delete the signal relay and put one out of the box from any other car with a Flasher relay for 5 bucks it's worth it did this modification 5 years ago and still flashing perfectly
@@alexbredewoud5063 i try that already , but the signal light only works for 3 sec , then is off
@@visionlink2012 probably the relay not good. try this put 49 and 49a together and select left or right the signal the light should stay on permanent if it stays on its definitely the relay