Carbon fibre skinning!
Vložit
- čas přidán 15. 06. 2020
- Something a little different and super fun. Hope you enjoy!
Carbon cloth used.
www.easycomposites.co.uk/#!/f...
Basecoat used.
www.easycomposites.co.uk/#!/r...
Epoxy resin used.
www.easycomposites.co.uk/#!/r...
T-shirts and stickers here!
buildcreate.bigcartel.com/
Follow me on Instagram @chris.purr
Contact me here buildcreateauto@gmail.com - Auta a dopravní prostředky
For your next panels, A small paint roller makes the resin spread easier and flater(less sanding) might be cheaper to and lighter to use less resin and do a clear spray instead. I’m a aircraft mechanic who deals with carbon/Kevlar on a daily basis. You did a good job !
Clear coat way cheaper. I'd do 2 coats of resin, then 4 coats clear. Cut n buff!
@@jakefriesenjake After the last layer of epoxy dries, what would you do to clear coat after? Any sanding or anything before clear coat?
@@Gborohooo yeah I would sand it down like normal, probably 120 grit, then go over it with a scotch brite sanding pad to be sure every low spot also is sanded and not shiny at all. then apply 2 or 3 coats of clear coat. Inspect the surface.
Cut (sand) with 1500g, and check to see if the sanding is indeed cutting nice (no more low spots). If it's good, then go 2000g, then 3000g, 5000g, then 8000g.
Then polish it out till it a mirror.
Before any polishing, make sure there aren't any low spots. If there are, you maby need to do a flow coat of clear (more layers of clear) to get it just right. Then cut n buff it.
@@jakefriesenjake Oh awesome, that was extremely helpful. Thank you!
This nay be a stupid question, but would a typical body shop know how to do this? I have done plenty of resin/epoxy project, but never dealt with clear coat or even automotive paint. I don't know how similar the processes of clear coating a painted part and clear coating a fresh epoxy/carbon fiber part are, so figured I'd ask.
I really appreciate the help!!
@@Gborohooo
Yeah, any body shop could do that.
Heat gun wafted over soon as you've put wet resin on helps with popping air bubbles for a perfect finish 👌
Now you convinced me to do this, and it turned out so great
I watch your videos, XD you want to do it for the supra ?
All the cars freeks watch each other videos :D
Hard work paying off, you can already see the love put into the build. Keep the updates coming buddy
Thank you dude, more on the way....got a lot of things I want to do!
That's looks fantastic! Great job and I look forward to seeing the car complete.
Thanks man, I’m also looking forward to it being done 😂
That is superb. Love to watch these kinda video's at the moment as I too do a bit of Carbon Fibre work, well done buddy!
180,000 views! Well done mate, been following since the beginning, and am also about to begin skinning some of the tailgate garnish and both front DAMD fenders on my Gen 4 Liberty/Legacy GTB Wagon.
Great stuff, keep it up!!!
This is absolutely incredible looking. You've convinced me that I am able to do this
I’ve watched a good handful of your videos, very refreshing to see some real craftsmanship✌🏼👍🏼
Thank you dude. Much appreciated!
Dude, I've been watching your work and reading up on your blog for a while now and you've inspired me to get my project Brumby underway! Keep up the fantastic work!
Thank you so much dude! Best of luck with the project, get building 😬
Holy hell, was that where this build was heading? Man every video has been impressive to say the least.
Glad you like it dude. Got plenty more cool stuff planned!
If definitely a great channel 🔥👌
Holy hell is correct
Great Work! There is nothing more satisfying than seeing someone taking control of their destiny, doing the things they love, sharing with others and hopefully getting paid for being themselves. You are inspiring, you have a colleague in Dallas, TX if you ever make it this way!
Looks amazing.👍
Incredible finish
Great video! Thanks for links to purchase the products. You have given me the courage and knowledge to try this. Thanks again.
Oh yeah, my favorite synthwave!!! Good job 👍👍👍 From Russia with love:)
Synthwave for life!!
Love the channel. Those guys at Easy Composites put out great content as well.
Thanks dude. Their channel is perfect for learning about this stuff.
That came out awesome mate, well done can't wait to see the rear complete 👍👍
Thank you so much dude, i glad i didn't fuck it up haha.
That came out so good! I'm going to give it a shot now!
quality job right there, attempting my own this weekend
super cool to see this build come along. love the vids!
Appreciate it dude, thanks for the support!
Mate, im mesmerised ! what a wicked video, loving it!
Ah thanks homie! Miss you.
I have to say. For the car that I own and modify there is basically no modification options cosmetically and you have helped me realize that if it doesn't exist for me why not just do it myself. This video as well as your over fender videos helped jump start my build list when its been haulted by the lack of cosmetic options
I really glad it helped out dude.
Both my cars have close to zero aftermarket options, so I’ve had to make everything myself.
Makes for a more personal and unique build 🤙🏻
I was starting to lose interest in my build (Mitsubishi asx) and I'd have to say you've reignited my passion for my own car. Earned another sub today!
That was a great video! Really enjoyed seeing the process.
Thanks dude. It was really fun to do!
Excellent job man!!! Perfect!
Cheers from Argentina!
Cheers dude!
That looks awesome!
Subscribed! I love finding in new channels. Thanks for making great content!
Man, i can't wait to see this thing on road!
Nice work mate, beautiful finish.
Thank you so much dude!
This was excellent mate!! Very very cool 🤙🏻🤙🏻
Looks really nice! Well done!!
Really turned out cool.
Cheers dude.
Just found your channel and subscribed!! Thanks and keep em coming. I just built a mold and this is my first go at Carbon Fiber work, I am going to skin two small pieces. This is what I found handy fro trimming a Multi-Tool. Drummers run out of steam to quickly.
Thanks for checking out the channel dude!
Multi tools are definitely best for cutting carbon. Way less dust and they don’t create heat and melt the resin from underneath 🤙🏻
Can't believe I've only just discovered your channel! Glad to be here, shout out from Canada :)
Nokan38 thanks for checking out the channel dude! Appreciate the support.
Y wz c
I was wondering if I should try to make carbon fiber fenders with vents, or carbon fiber hood with vents🤔 You inspire me, good job!
Been looking for a good video about skinning, I have a 3d printed mau5head or two that I've been wanting to skin for a while now, give them abit of strength to help them be stronger. this really helps me know about the base epoxy and such!
Glad it helps dude!
Brilliant tutorial mate. Keep em coming
Thank you dude! appreciate you checking out the channel!
I've never seen anyone do anything close to this. Never even seen your channel. I have to say though, for being the first bit of exposure.......I am extremely impressed!
Thank you so much for the kind words dude.
Daaam, that’s so beautifully done great work, very inspiring. By far this is one of the best CZcams channels 👍
I’m so excited to see the final results
Thank you so much dude!
Looks great mate 👍🏼
One of the best CZcams channels imo your attention to detail is amazing pal keep up the good work
Thank you so much for the kind words dude.
Great Job.
Looks really good for a skinning. I usually scuff the low spots with a red scuff pad after block it. The scuff pad is flexible enough to allow you to get into any low spot. The last thing you want is it flacking off on those low spots that you didn’t scuff/sand. UC resins are good but just dont trust them. I always spray a 2k clear on top. But it looks really good man.
Incredible job, bro. Looks amazing. It's got me to thinking about doing it too......
Fantastic work, I have been enjoying your project 😉👍
Thanks for checking it out 😊
Thank you for sharing you have given me confidence to try my own project 👍
Glad it helped dude!
Beautiful!
Broooo!!! Your attention to detail and work ethic are really paying off! That carbon fiber finish looks so deep, I'm really looking forward to seeing the finished project.
Thank you so much dude, really appreciate the kind words. Much more to come.
Great content bro! Keep up the good work. You got a new subscriber with this video. Looking forward for the next ones. I've just installed a full fiberglass bodykit in my s13 and is getting painted soon but in future if I get tired of the colour i definitely consider carbon skinning the whole car. 👌🏼
Really appreciate the kind words dude! Good luck with the build 🤙🏻
Awesome Job ! Love It !
Nice job, looks great.
I am in two minds to either skin my smart cars panels in the same way or create moulds and make full composite ones. You have got me thinking skinning is the way forward now
It’s up to you dude, I’d love to full composite parts in the future.
Skinning is great place to start with, pretty simple process and get you used to working with the carbon.
@@BuildCreate I've been dabbling, 3d printing and making a mould for a small air intake. Huge learning curve but I think I'm getting there.
The way you have sculpted those wings from nothing has inspired me to have a go at something similar.
Keep up the good work
Check out street bandito for some awesome work with carbon, in case you guys haven't seen it.
@@BuildCreate
Never thought about skinning my 1989 xv1100 until now. Id rather keep her as close to original as possible but that finish would look great on her, pure bad ass.
Magic, love these, the only video on CZcams with 0 thumbs down
Haha, give it time.
Damn bro that looks amazing!! Good work!If that was your first time I’m proud of you!!
Thanks man!
Great work!🤘
that looks amazing
Cheers dude!
You do nice work. Thanks for shearing.
Great finish mate!
Thanks dude!
Cool buddy thanks for sharing and you have definitely given me some Ideas 😎👍
GR8T JOB! Definitely a labor of love 🤓
👍😎
That looks f*#king ace man. First video I've watched and it was enough to make me a subscriber. Keen to see more
Really appreciate it dude!
I know what im about to do to my Jimny lol. thx, it turned out great!
Use a small roller with a Mohair sleeve for rolling the resin on. It’s faster and the finish is much smoother then brushing it on
Just about to do this to my wife’s car wing mirror caps. Awesome work 🤘
Awesome! You’ll have fun that’s for sure.
Looking forward to it but after we move so I'm not stressing about cure times and someone touching them.
Looks really good. I’d still clear coat with a 2k automotive clear. I don’t trust uv resins, plus it gives it double protection.
Loos really good man I use easy composites aswell and it's really good stuff.. Plan on doing the front end on my skyline very soon.. Hopefully it'll turn out as good as this 👌
This is dope!
I did this on the inside of my car and outside 5 layers with silicon in between each coat of kevlar ...i used kevlar and the resin my friend did ..he works at a custom shop where they make everything carbon or kevlar .i painted over mines tho ...i drive a almost bullet proof crown victoria..lovely car ...
Loving the SK shirt dude 👍
You're a fan!? Awesome! I've had it for such a long time and really need to get a new one.
love it !!
Nice work brother, it looks stunning. 🇬🇧👁
That looks so gooood awesome job hell yeah 💪👍👍
You made it look easy.....!
it look nice, good job
you should lay down at least two coats of epoxy before you start to sand or you can sand right through it .
That came out sweet
Cheers dude.
Looks good
Great tutorial and soundtrack😎
Nice job!
Going great bro
Ok so I’m seeing you doing your carbon Work… nice. Is this fender the same wide body fender you did in Fiber Glass?
Quality job fella 👌
Thanks man!
I love this video. I just need some assistance. I did not see you using vacuum bag, is it not being used ay times?
Mate this is an awesome video thank you so much. Have you tried using 3 layers of carbon with this method and release the part from the mould? I thought for big complex parts that needs more time for laminating this method will be much easier but I don’t know if it’s gonna be strong enough!
Looks great! Question for you though. How much thickness would you say it gave overall? Like say from where the front of the doors meet the back of the fender (wings) its it pretty obvious or no? Thinking i would like to skin a hood (bonnet)
Thanks Sir Good job..You encouraged me I was n fear doing my ..(Hood)project car ..Now I believed I can do it . again Thanks Sir..Good job
Some ppl will go for expensive custom paint but most going vinyl rap way for more style or new extra thick vinyl for added protection, but sun still beats it up worse than paint. Skinning u get the protection factor, plus durability factor & can still get fancy finished paint or clear look.
Outstanding work 👍🏻
Thanks!
Build Create no probs credit were its due I have a question I have a spoiler which is rounded not sharp angles which is best process would u say to cover in real carbon fibre it's more curved edges end to end again great work all the best 👍🏻
Great Video, and awesome job!
Cheers dude!
Looks sweet 👌 and unique
Thanks man!
Before applying the epoxy basecoat. Cut out all the fiber to size on all panels to be skinned. You save a lot more material. Place closes to each edge to save material. The small bits can be used for interior peices or smaller bits throughout the vehicle.
nice job! i missed, or what you use on the first layer (black)? is it gelcoat? and carbon is 240g, or?
Did u add black basecoat paint to the epoxy first or can u buy that basecoat as like a black epoxy ? 👀 thinking of doing my bonnet 🤘
hey man! loved the video, could you please tell me which kit you bought from them with a piece of matting that size! cheers!
Nice!!!
Love it! Doing an entire Lamborghini Aventador in CF.
Fucking good shit man! I was on the fence about making some carbon covered parts but you've convinced me!! Keep up the good work
Very impressie dude!
Thanks man!
Great work!cheers from montreal
Nice video! very helpfull, i will try to do something laminate in carbon in the future.
You should be super proud of that for a first go. I tried a few small parts for my first time and it was a nightmare. I have a rear diffuser I want to do next, it's off my fd2 civic so not a cheap part to screw up, I'm really not looking forward to it.
Fuck slot,fuck gambling,fuck that huge
What did you apply to the fibreglass fender first before you put the carbon down? When you say base coat do you mean black gel coat ? Heard there is some bonding issues with carbon onto fibreglass ?