SkeeRide 2 Build - 3D Printed Snowmobile
Vložit
- čas přidán 5. 09. 2024
- Today we're building the all new SkeeRide 2 by BuildItBetter. This video is not meant as a build guide as there's a few times in the video I have to go back and redo some things. This was my first SkeeRide 2 build so it was a bit of a learning experience. Build includes the initial test-run at the end of the video.
If you're looking for the files to build your own SkeeRide 2 you can find them here: www.myminifact...
If you're looking for a build kit to help you with your SkeeRide 2 build you can find them here: rcprinter.com/...
Music from #Uppbeat
uppbeat.io/t/t... License code: JBAWAV5SCRWZYLVF
uppbeat.io/t/m... License code: TNEHTLSCX9MDEDXB
uppbeat.io/t/t... License code: YWHBLWFW5JOU0NGZ
Wow it looks so smooth and refined compared to the first skeeride, definetly a quality redesign with some great engineering!
What size of battery like can you use a full size 3s or does it have to be smaller to fit in the sled
Newbie looking at getting a 3d printer. No so much turn use a rc as to hang in garage. What printer should I look into
Awesome job! Looking forward to see my 3D printed Pajero on your channel soon or later!!
yeah I'm gonna need to build one of your cars for sure
@@rcprinter awesome!! I can't wait
Great video! I like the shocks, printing my first one right now and trying to decide on shocks. Are those from Amazon?
Those are from Aliexpress... we just go similar ones in our shop: rcprinter.com/products/built-in-spring-shock-absorbers
The tool you use for the small screws, is it an electric screwdriver? Is it a special magnetic bit to hold the screws?
yeah I have the makita 12v electric driver. The bits are metric hex drivers in different sizes, not magnetic although magnetic would be nice.
Is brushless needed? I have a 550 brushed 12t just laying around . What size brushless if that's preferred ?
Preferred motor is this sensored one: rcprinter.com/products/castle-creations-monster-x-combo
Here's what I carry for budget: rcprinter.com/products/surpass-hobby-3674-brushless-motor-with-120a-esc-sensorless-combo
Brushless isn't technically required. Preferred motor size is 3674 with ~2200 kv. A 550 has the same 36mm width so it should fit but not sure if it'll be the right speed/power for the skeeride. My guess is 12T might be too fast but IMO its worth a shot if you have one lying around and you can always upgrade later if required or perhaps try a larger spur or smaller pinion on the belt drive.
Nice build video
what battery?
I'd recommend a 3-4s lipo if you have the same castle combo I installed.
Has anyone tried a TPU track?
I'm sure if you check the discord server people will have tried it but generally this track is much more robust than skeeride 1 so hasn't caused a lot of issues when printed in pla.
Is it a Mamba X running on a small 3S pack ??
Yeah i think it was running on 3s in the video but I've tested it upto 6s as well. I like 3-4s the best I think.
Where do I find the 3D printed parts for sale or the files to print them myself?
www.myminifactory.com/object/3d-print-skeeride-2-267859
Will you or do you know anyone who will build these for a buyer.
If you check the skeeride 2 page on myminifactory there's a link to a list of people that will print you one. www.myminifactory.com/object/3d-print-skeeride-2-267859
Did you hear about the hpd f1 competition 3d printed car? I have built it myself.
yes, its definitely on the list to build
Where can I get the lights for it
I used this kit but had to extend some of the wires: rcprinter.com/products/4-led-rc-light-kit-2-white-2-red
Could you make a mini version?
some people have... check the facebook and discord groups
Would It be possible to get a decal kit from you?
sorry I just print these out on sticker paper on my regular inkjet and cut them with scissors. very low tech.
what size is the motor ?
Its this combo kit: www.castlecreations.com/en/mamba-monster-x-sm1515-2200-010-0145-03 Technical specs are down the page a bit... Length: 75.4mm Diameter: 40mm (41.4mm with fins). You can get them here: rcprinter.com/products/castle-creations-monster-x-combo
Where can I get a track
you can print one! Check out the authorized resellers list in the description here: www.myminifactory.com/object/3d-print-skeeride-2-267859
Make a SOLAR powered car
What is tour printer 3d
I mostly use Prusa mk3's
@@rcprinter so this will all print on a mk3
@@toepunch001yessir
Wooow so impressive build bro👍👍👍done subscribes
Thanks dude :)
say is that sled the 165