Removing an Alternator pulley
Vložit
- čas přidán 2. 03. 2017
- This is one of the many ways of removing an alternator pulley. This way is very effective with this type of alternator.
Honda Civic brake job • 1995-2000 Honda Civic ... - Auta a dopravní prostředky
Thank you for sharing your knowledge and helping me this is priceless I had a ruff time soaking and using the wrong tools thanks again
Really glad this helped, can be horrible at times. Happy thanks for watching.
جيد شكرا بفضلك تم الفتح
Hi, like your video. I have an alternator with a pulley that doesn't rotate freely. It's a little bit stiff. I have asked mechanics to keep my alternator and only change the pulley. They always want to change the whole alternator which is an expensive repair. Are they just choosing the lazy and pricer option? Thanks
Hugo Henderson if it’s a pulley issue and they can change it, then they should. Depends on cost and labour. If it’s a big job to get at it, then it’s worth changing the whole unit.
the nut on my mustang 2.3 liter came off coming home from work. I did notice some metallic shavings on inside of the pully. I was able to tighten the nut back on but is it something I should worried about?
Someguyto try to tighten it to torque settings, use some lock tight if necessary. Thanks for watching.
ThankYou
You’re welcome
ty for video. Question what about the allen nut? I saw the 24mm hex nut but not the allen?
I couldnt get it off with the Allen, so I used the leverage with the fan and impact to remove it. It was very seized.👍
@@drivewaydiyer6504 Thank You, I tried the allen key with impact drill and stripped it. Oh well. Appreciate it.
Thanks dude!
You’re welcome.👍
Thank you
You’re welcome 👍
HOW LONG DOES IT TAKE TO DO THE PULLEY REPLACE AND PUT BACK TOGETHER FOR PT CRUISER
angela bigford Depends on your ability, probably a couple of hours. You’d need to remove the alternator first, depends how quickly you can remove it and what you come up against. Good luck
Nice job sir 👍
S1KRR thanks for watching👍
Do you remove the nut turning counter clockwise
Yes mate👍
Do you know what the tool is called that you use to pull the pulley off? At 2 minutes and 50 seconds?
It’s a puller, there’s loads on eBay, not that expensive either.
What is the technique if you don't have an impact driver? Put the pulley in the vice and then undo the bolt?
Do that, have a big cheater bar aswell
@@drivewaydiyer6504 Thanks, discovered a friend had an impact drill. 30 seconds were followed by an hours chatting :-)
You can also use vice grips on the larger socket(usually around 24mm) and let the table or vice hold the handle of the vice grips, then use a dencent length hex through the back of the socket to the center of the pulley with a ratchet
Great input, Thankyou.👍👍
Where can I buy
The puller? There’s plenty on eBay.
Nah, just hold the pulley and use an impact and a socket. It'll just spin right off.
FairPlay.👍
I don't have a impact drill
If you don’t have an impact, your garage/shop would probably undo it for you. Worth investing in one though, if you’re doing your own repairs.👍
@@drivewaydiyer6504 yes gas station I was thinking but Im going to buy one, impossible to get it off by hand.
good job. lose the accent , I can barely understand you. I speak English, too, but it loses alot in the translation coming over the big water.
Or I can just mute it and read the captions.
Didn’t realise I had a huge accent, but hey, I hope you got something from it. Thanks for watching.👍