Peugeot Speedfight 2 MHR piaggio
Vložit
- čas přidán 1. 11. 2017
- Mhr racing kit w/pia block - specs below
Behind Cam: Péter Hori Horváth
setup:
MHR racing cylinder
MHR Team 1 exhaust
MHR HPC
MHR overrange vario kit
MHR Delta clutch
MHR selettra rotor
MHR short intake manifold
MHR E14 air filter
Dellorto black racing 21"
Kiesler mechanical waterpump piaggio LC
Stage 6 Tassinari - Auta a dopravní prostředky
What a beast! Great build, very nice!
Dude. This is 70cc. I cant wait to get mine. In my country there are some that cost 500 euros in great condition. Put a 70cc kit new exhaust cluch transmission and carb and its a street machine
DailyTech DT ikr
Wohnst du in Deutschland?
@@sheevpalpatine9041 ja
Bro this is a full option
it sounds awesome, like a 50cc dirt bike
i never heard a scooter sound like that
proper smart, love it!
Looks & sounds amazing! 👍🏻
Nice Speedfight!
piękny dźwięk 2 suwa :)
thanks Polish brother!!
Where can I find those backlights??? I want them on my speedfight to!!!!!!
Beatiful Scooter
Sounds gorgeous
Exactly, attention grabbing
Things a fucking beast, a beautiful one at that
Der fährt glaube keine 25
Nein ist auch 70cc
Doch, klar, alles gedrosselt und original!
@@Germknoedel Kann man schon so neu Kaufen 😉
I have jetforce 2006 is it possible make the same setup ?
woooooow
Where were your parts purchased?
bottom plastic from where?


Hello quel moteur a vais vous et quel configurer svp ??
nice build one question to fit the rs 50 front fork what have you canged,dose it jut fit in ?
Thanks. I got a spacer and a new tapered bearing to build in.
Was it hard to put in piaggio block? Or is it easy bolt on type of thing?
Plug and play with this set.
www.scootertuning.ch/Conversionkit-Stage6-Peugeot-auf-Piaggio-zum-Umruesten-von-Speedfight-auf-Piaggio-Motor::15087.html?language=de
I think your scooter project is RAW👍👍👍 i was just wondering what weights you are using in the variator?
The rolling weights, are around 4.0gr or 4.2
@@APX177what you done to the engine or did you replace it with a different one?😮
@@KrisRoberts114 it's a piaggio hiper 2 engine like on an aprilia sr
I have speedfight 2. But there is a problem. When i start it, seconds later, gasoline starts leaking out of carb, and moped stops running. After that it doesent even start. Any tips?
Maybe the float is stuck so the small shut-off valve doesn't close properly or falls out. Tap it if it doesn't help, you have to disassemble again.
Nice speedfight, What type of rear shock absorber did you use?
modified aerox
Digga übertrieben nice schuhe bro
Nigga
Which scooter model do you use the Piaggio engine block? Is the installation of the engine on the Speedfight chassis plug and play?
Runner LC DD i think
Yes, but is it plug and play ?
Mine is runner LC, but you can use the aprilia sr50 from 2005 or the piaggio nrg is also a good choice. You have to buy a Stage 6 conversion kit with that you can install the piaggio engine block to the speedfight frame.
Aha :) thats great info!
Which carburator
Please tell me that's not stock?
Knossis toller?
Est-ce que c’est ton cylindre d’origine que t’as gonflé je veux savoir parce que en fait je veux m’acheter une scooter comme ça
Is this the 100cc model ?
Is it L/C
I got the same Scooter but in monster energy Drink style and not so high tuned!
😱nicee
wow very nice scooter
look on my videos
Nice ik zag deze foto nog recent op marktplaats, super betrouwbaar😅😂
Did you swapped to horizontal engine? How much cc.?
Sounds amazing dude ❤
yep, now is vertical piaggio 70cc
Jestem ciekaw jakim cudem ten silnik p/g tam się znalazł sam bym sobie do swojego przełożył.
www.scootertuning.ch/fr/Kit-de-conversion-STAGE6-montage-dun-moteur-Piaggio-sur-le-chassis-Peugeot-complet::15087.html
Are those SR50 rims and forks? Do they fit on the speedfight 2? Hoping to get rid of that mono link front fork of mine, but I don't like the vivacity forks and rims.
Yes the rims and the the forks are from SR50 but not really plug and play. You need a new tapered bearing and a spacer to build in.
first street run after rebuild
Attila Németh 70ccm ?
Yep
komoly 70es
:D
@@APX177 what setup and Top speed ?
Komoly gép 😉
is it safe to have naked bars if you dont have a garage like if it rains?
Super tare
how many kilometers will it travel on 1 piston
near 3000km
Hello friend! What is MHR short and Kiesler pump?
Hi,
Malossi MHR short intake manifold and Mechanical waterpump Piaggio LC Kiesler.
I’ve got a 70 but mine doesn’t Rev nowhere near as hard as that how do you get it like that
the key is the mhr selettra ignition
please setup link
krankkkk
nice
Szia, mennyiért adnad el? Most nyaron dolgozok, viszont szeptemberben lenne aktuális. (ha meg megvan ugye)
Megvan meg. Jelentkezz majd!
@@APX177 Üdv ismét, egy körülbelüli árat tudnál rá mondani, hogy tudjak kb. mennyivel kell számolni?
排気量は❓
What fork did i switch to + what rims?
Aprilia sr50 2006
hola que rodillos tienes puestos y que las cambiado para que tire asi
If i remember correctly 4.0 in it with MHR overrange kit from 2010
Do you know how to install rear spoiler? I got mine without brackets
It should be fix with three cap screws from the bottom, but without brackets a bit difficult.
which block was put from which exact model?
Aprilia sr50 2006, but the Gilera Runner and the Piaggio NRG has the same block
szép
from which scooter the front suspension?
aprilia sr 50 2007
😍😍😍😍😍😍
kemény
what is the best exhaust that you can get for speedfight2 ?
It’s depend on your installed parts, but the “polini for race” can be a good one, if you keep the peugeot block.
Yasuni R or a C21 (depending on your budget) on a 70cc is always up there with the best. The Polini exhausts are great, but really expensive
Szia milyen tuningot kapott ? Mikor lettek módosítva h igy gyorsul ?
Szia, ott a leírásban is a lista amúgy.
MHR racing cylinder
MHR Team 1 exhaust
MHR HPC crankshaft
MHR overrange vario kit
MHR Delta clutch
MHR selettra rotor
MHR short
MHR E14 air filter
Dellorto black racing 21"
Kiesler pump
Stage 6 Tassinari
Hall was hast du an deinem Speedfight alles verändert ??
Hallo,
Die Gabel und Bremsen von eine Aprilia sr 50, der Block ist piaggio und alles was drin sind von Malossi. Irgendwo oben ist eine list von Teilen.
Wow
which front suspension do you have?
Aprilia SR50 2006
It is horizontal cylinder?
Yep, piaggio H2o ,
Where did you buy the rear under fender?
I bought it ca.10 years ago. Now you can find it on this site: www.scootertuning.ch/Unterboden-MTKT-Peugeot-Speedfight-II-weiss-mit-weissen-Rueckleuchten::5325.html?gclid=CjwKCAjwkN6EBhBNEiwADVfyazXwE1Z_wclAUVfI_A4a7sl2psSamxXokOnSAVrFMq0rv6lj3sJOnRoCl84QAvD_BwE
@@APX177 Thanks
Which fork did you use for the front and how did you put it in?
Aprilia sr50 2006 but not really plug and play, a spacer and a new tapered bearing were needed to build in.
is it hard to put in?@@APX177
and do you need any non common hand tools for it?
@@APX177
How did you mount the engine?
with a subframe from "Stage 6" - peugeot to piaggio converter kit,
Original speedfight 2 block?
Nope, piaggio
I’ve got 6 g rollers should I drop them to 4G will the scooter be a bit more rev happy I’ve got a malossi 70 cast iron kit standard airbox with malossi red sponge and snorkel out for more airflow my jetting is perfect. Standard clutch but it has yellow clutch springs and standard variator with 5.7G malossi rollers what would you suggest to get it running like yours
First, you have to swap the engine block to piaggio, and after that you can buy a ton of parts (the list of the parts you can see on description) and than you need a proper setup.
@@APX177 I’ve got gilera stalker which uses the piaggio block so I’m one step in I guess 😂 thankyou I can’t wait to have a scooter like that I think it just needs some major tuning
@@APX177 it’s very quick it just doesn’t have the like tourque like yours has it does spin the back wheel sometimes
@@dexietyy7922 If you want the same performance, you need to know that the lifetime of a piston with this parts and setup is not more than 2 thousand miles.
If you still want it, you have to buy a complete Malossi MHR kit or Polini Evolution series, Stage 6 etc..
@@APX177 okay thankyou for letting me know maybe I should consider buying a second scoot for it 😂
Send me the full spec...on parts...what setup did u use barat🤘
You can find the setup in description.
@@APX177 köszönöm
Ooommgggg
❤❤❤
How many cc is this MHR racing cilinder? 70 right
Yep
thx man, your speedfight is gorgeous@@APX177
Mostro.
Normal wen da ein Piaggio Motor unter ist
i want to buy an AC colled one is it any good?
Don't do it. This bike has piaggio engine from an Aprilia sr50 2007. The original engine block is not so reliable that's why I swapped to piaggio engine.
@@APX177 thanks a lot :)
Thats not a speedfight motor but from an gilera runner
what fork have you used???
Aprilia sr 50 2006
setup?
MHR racing cylinder
MHR Team 1 exhaust
MHR HPC crankshaft
MHR overrange vario kit
MHR Delta clutch
MHR selettra rotor
MHR short
MHR E14 air filter
Dellorto black racing 21"
Kiesler pump
Stage 6 Tassinari
What have you done to that 😍😂
Kettesbe mennyi a vége?
Az összes, de legalabb 420
👍
if i want to tune my speedfight 2, just like you did, is it better to get an lc or an ac?
Mine has the Piaggio LC engine block instead of the original Peugeot engine.
You can buy a block transformer kit from Stage6 with which you can swap the engine block on the easiest way
ok thanks@@APX177
why did you get the piaggio block though@@APX177
@@skip1012 Compare to the factory Peugeot engine the Piaggio is the most tunable with variety of parts, and reliable too. The limit of the original Peugeot engine is around 10-12hp and you can't buy anything to do a high end tuning.
@@APX177 how much did it cost you(just the swap and everything that comes with it)
El blocco piaggio h2o
What color is that on the transmission cover
It got polished.
@@APX177 u sanded down the color first right?
@@rainbowberk1376 Sandblasting isn't necessary, just got polished
@@APX177 what did u use to polish it ? Paste for polishing metals?
yep
Que le pusiste un motor Piaggio a una Peugeot speedfight y le cambiaste el minarrelli vertical
If i know right the original engine is not from minarelli, it was a coproduction between peugeot and honda.
Milyen villa van bent hogy már nem az egyoldalú felfüggesztés van rajta ?
Aprilia sr50 2006-os verzio
@@APX177 kellet valamit át alakitani a vázon hozzá vagy simán bele megy ?
@@keleti449 A vázon nem, csak kormánycsapágyat meg közdarabot kellet hozzá esztergáltatni.
@@APX177 köszönöm a válaszodat csak azert kérdezem mert nekem is van egy ilyen peugeotom 100 köbcentis és egy kicsit át szeretem volna alakitani!!
His motor is two strokes ?
no 4 stroke
5 stroke
50 cc??
70
Replica?
MHR racing cylinder (MHR 6T)
Wie viel cc?
70cc
are all speedfights 2 piaggio engine ?
nope, the stock engine is Peugeot kind of honda copy,
@@APX177 thank you.
Qu'apporte vraiment le fait de monter un haut moteur Piapia?
a lot
Thats not an Speedfight Motor,, right?
It's a piaggio cylinder block from an Aprilia sr 50 2007
How much ccm
Vitali Gauch 70cc
What have you got in it
see in description
@@APX177 ok thank you
Was ist das für eine Rakete
SpeedFight2 tuned
@@jovan7565 würde ich mir kaufen aber nur wenn die so abgeht
@@Sinto26 Es get nicht so aber für 50cc geht sehr schnel.wen du tunning machst kan dan so schneel gehen:)
Are you still using the stock tyre, because it looks exactly the same....
Definitely not, i have a pair of new Michelin Power Pure on it.
Wat the top?
around 120kmh
exhaust??
Burek Malossi mhr team 1
burek ogórek :D
Wie teuer war der Umbau ca?
Krass, hast du den noch? Und wird der noch gefahren?
Son Goku 2004