Periodic maintenance of Royal Enfield Interceptor 650 | Buffing
Vložit
- čas přidán 26. 08. 2024
- I have recently completed 75,000 km on my RE Interceptor 650.This video is about how do I maintain my Interceptor 650,basic tips and tricks to maintain the motorcycle including buffing , polishing the tank, chain lubing etc.
Buying links of the product that I used
Autosol Metal Polish : amzn.to/3Hc1x10
Drill machine :
amzn.to/48LxgSk
Felt pads :
amzn.to/3SdcdD2
wd 40 :amzn.to/47sqH64
WD-40 Electrical Contact Cleaner: amzn.to/47H3iyd
3M car wash shampoo: amzn.to/4aQCuht
Wax Polish : amzn.to/48KTSTe
Wruth brake cleaner: amzn.to/3vjm1lF
Please like share and subscribe to my CZcams channel " Gadget Wheelz"
#royalenfield
#interceptor650
#continentalgt650
#gadgetwheelz
#royalenfieldindia
#motorcycle
#buffing
#royalenfieldinterceptor650
#motorcyclecare
Your Inty is loaded. Just a suggestion, apply all the cleaners (sprays) before washing and apply lube, polish, wax after 👍🏼
Thanks and Appreciate your suggestions 👍
That interceptor is smiling because its being taken care nicely!
A job well done and fantastic maintenance. Need your help for the following -
1> I have read some place that WD40 is not good for rubber parts like the one inside the fuel cap. Isn't it better to use silicone polish for rubber parts/Indicator stalks/Speedometer.
2> Please let me know how to avoid getting rust on chrome exhaust in the long run.
3> How to clean the front shockers[the exposed steel part before the shocker sleeve] . 4>Which type of pressurized grease to be used for wheel bearings, especially during Monsoons.
5>How to clean the Water drainage near the Fuel inlet without inserting a wire into it.
6>How to maintain the battery terminals.
I am using WD 40 only for lock sets not for rubber parts. But if it comes in contact with rubber parts, I dont think it will damage in a large extent.I am using it for more than 4 years on my Interceptor.
Rusting on bend pipe is a major issue.You cant avoid permanently unless you replace it with stainless bend pipes.
Fork pipe cleaning i am not using any special cleaning agents.Just car washing shampoo.
Greasing the bearings are done at local mechanic.
I use nylon thick wire to clean the Fuel tank water drainage pipe
Battery terminal usually cleaned by my local mechanic
Hey bro, I've got an Interceptor too and I've done almost all the same mods you have 😁 Great video, keep it up!
Thanks bro 😊
@@gadgetwheelzIf you don't mind me asking, what is that white colour powder that you had used during engine polishing? Never seen it before, please let me know what it is for
@Zuputmer , white buffing powder ,generally used at RE for buffing engine casing. I dont know the exact name of that.I got it from RE service centre upon request.
@@gadgetwheelz ah i just did a little bit of research and I think it might be aluminium oxide powder. Commonly used to polish metals, gives a mirror like finish! Will try it out
Well since it only takes 6 minutes think I'll clean mine tomorrow 🤣 Great video! 🥓🏍🏕
Thank you friend for uploading and efforts 👍🙏🏻
Beautiful👌75.000km!! Any big issue you wanna share if you dont mind
No major issues, most of the cases it's wear and tear.No issues with engine so far.
Any link to the oil tank thing beside the oil tank cap
I bought the tank cap collar from www.way2speed.com
Can you do a video or give details regarding the alloys switch and the performance
Sure 👍
Which company's cone set bearings are you using for the bike?
NTN Tapered roller bearings
Hey man! Looking to get the Shine X pro foam sprayer! Seeing many negative reviews online, what has been your experience? Worth it? Is the quality good? Or should I go for the IK foam sprayer?
There's also the Wavex foam 3 sprayer now, confused between the three.
Dont buy Shine X Pro. Though the quality is good, spray is not effective after few usage. Try something else.
@@gadgetwheelz Thank you! I have seen positive reviews of the IK foam sprayer but it's a little expensive at 3.5k now. I think I will get that! As they say "Buy it nice or buy it twice". Thanks for your input
@@gadgetwheelz Hi, I'm considering getting the Baja Squadron Sport lights for my Speed 400. You have the Pro lights right? How has the experience been with them?
@gurucharanchundi , I am using Baja Squadron Pro, there are very powerful.
Hi brother, it's really nice to see an inty with 75k on the odo.
Where did you get the visor? Any link?
That is a Puig visor, you can get it from Bikenbikers
@@gadgetwheelz thanks brother
Purchase Link for the the drill buffing pad and set
amzn.to/48LxgSk
amzn.to/3SdcdD2
Purchase links of all products in the discription .
How do tou prevent water getting in the tank
I haven't faced that issue. If fuel tank cap gasket is in good condition then no need to worry IMO.
❤❤❤❤❤🥰
Just a quick question, what tyres are you using 👍🏍🙂
Vredestein tyres
Where can I get S&S exhaust with header pipes?
you can get S&S exhaust from www.highnoteperformance.com
Just curious...hows the mileage?
In city 25-26 kmpl, highway touring 30-32kmpl
Hi
Which engine oil is good for the int 650
I use RE Liquid Gun during servicing at RE Service center. Motul 10w50 if I change at local garage.Never tried any other engine oil. Important factor is you should change engine oil on every 5-6k kms intervals.
@@gadgetwheelz thank you 👍
From where did you get the alloys for the bike man ?
Those are from RE , you can get it from RE Service centre or RE genuine spare parts sellers. These alloys for Interceptor and GT, so no need any modifications, it is a direct fit
@@gadgetwheelz but the guys at RE said that we cannot sell alloys for the older interceptor model as it did not come with alloys . I found this justification very silly . Then they said you should go for aftermarket alloys.hiw strange is that ?
That's very silly...try at some other RE service center,otherwise better try at RE genuine spare parts shop.
hi how do you got S&S Exhaust
i mean where
I bought it long back in June 2020
www.highnoteperformance.com/products/s-s-re-tapered-cone-slip-on-mufflers
It's like polishing a pig. Pay a little more and buy a Honda.
😄😄 , thanks ....!!! I am happy with what it is.....just the miles talks.....
Why would you change it ? Buy a Honda and be like everyone else with a plastic bike.
Hi! Nice video! As I see you have not stock alloy wheels size 17. Hiw it influences on speed??
Thanks...They are stock alloys (Size:18)made for Interceptor/GT 650 by RE.
No difference in riding compare to stock spokes wheels
Sorry bro you seem lazy
😀😀 why bro?