Eevee and Leafeon 3D-printed Pokemon

After 3 days of multi-color 3D printing on the X1-Carbon 3D printer and two AMS units with 8 filament colors.
3D models:
Pokemon - Eeveelution by Scrazyone_SnapPrint3D
cults3d.com/en...
cults3d.com/en...
cults3d.com/en...
- - - - - - - - - - - - - - - - - -
mihaidesigns.com
Patreon / mihaidesigns
Instagram: / mihaidesigns
Twitter: / mihaidesigns
Buy me a coffee mihaid.com/coffee
#mihaidesigns #shorts

[@MihaiDesigns]

3D models: Pokemon - Eeveelution by Scrazyone_SnapPrint3D
cults3d.com/en/3d-model/art/pokemon-eeveelution-easy-print-no-support
cults3d.com/en/3d-model/art/pokemon-eeveelution
cults3d.com/en/3d-model/art/pokemon-eeveelution-scrazyone

[@pressstart0241]

Green part of the Eevee support looks like little earbuds! Cute!

[@saadhero9107]

Didn't know printed models look this good already

[@--3D]

The dragons!!

[@MihaiDesigns]

Yup they look awesome!

[@Zyghqwyv]

Is it possible to use one of them as the purge tower? Would love to see a short of that. Would be inteteresting to see a model used to purge

[@MihaiDesigns]

You can purge into object if you want to save a bit of material. I don't like the looks though and prefer printing just what I need.

[@marsfeathers]

​@@MihaiDesigns i think what they meant is you designate one of the actual models youre printing to only be made of purge material and see what kind of colors and stuff you get and what it looks like? At least thats what that sounded like to me

[@--3D]

@@marsfeathers same here, I'd like to see that, just for the fun of it

[@marsfeathers]

@@--3D right?? I don't know enough about the logistics to even guess how you would go about doing that but it feels like it could be done and that it would be cool

[@--3D]

@@marsfeathers I agree and support the idea!! 🙌🏼🥳

[@someoneonly]

Thats friggin adorable

[@Jupiter.exe_o7]

You can’t 3D print happiness-
This:

[@kingjolteon335]

very cute! :3 ❤

[@FarisDaUmbreon]

Adorable.

[@Arbiter1223]

I LOVE THEM!!! That is so awesome!! :D

[@wayverleesoulsong]

I love the branch supports so much

[@RoundBaguette]

Can you do a vaporeon?, asking for a friend

[@Imad_Oofus]

Gawd dayum. Those are beautiful.
I love the x1c so much.
Good work

[@MihaiDesigns]

Glad you like them!

[@QTcomicsPOP]

I bet you make a fortune at conventions selling those

[@teamprkr2550]

hi! amazing prints I want them so bad, but I just want to point out a few errors
-the thirds eevees tail is inverse
-2 of the leafeons paws are black, not brown
-the ears of the two leafeons mentioned above aren’t green (one of the is, but barely)
I probably should be talking, I have no idea how 3d printers work let alone how they can print multiple colors, so take these with a grain of salt haha.

[@inkling457]

Also Leafeon is a V E R Y light tan here, almost white, which definitely isn't accurate. It's supposed to be darker, but idk what colors are available for 3D printers.

[@asagothe_fander]

No one’s talking about that one Evies tail and I love it because it makes it look cuter and I’m sad no one is talking about it

[@UngovernablePenguin]

Man I wish I could get my supports off that easy

[@petramai9488]

Was about to comment: we need leafeon. but I spoke too soon

[@AllTheBestVideos]

You need the AnkerMake M5

[@Fail-harold]

You should print an eye, then glue discarded tree supports from other prints to it, making an eldritch horror

[@mokhlispaimin2488]

😊❤ Eevee 🦔 so much 💕

[@eugenedesrosiers518]

I want a baby Eevee 😍

[@XxXpotatogamingXxX]

Hi Barnabys!

[@YosoyDerpy56]

Leafeon 😍😍😍😍

[@khactualy3826]

can you try out the whambam plate?

[@_Xantras_]

There’s an ongoing discourse about how Bambu’s carbon rods get worn quite quickly.
Have you dealt with such issue ?
According to Naomi Wu, the solution is to use polymer bushings

[@daliasprints9798]

Can't get worn if the printer spends all its time pooping rather than printing... 😂

[@MihaiDesigns]

I'll have to use it more first

[@MrMartellSincere]

Super 🥺🥰

[@Jay17107]

Will you do greninja? It's my favorite pokemon. Would definitely love to see you print it 🤩🤩

[@florianp.6256]

❤

[@kamikazeelzorro1107]

Awwww, little tiny babys ewe❤

[@randommoth4978]

aghhhhhh so cute

[@BingBongFairy]

Poor leafeon never quite gets the right patterns in 3d printing I've noticed 😂

[@mdyspirit6603]

EEVEEEE

[@EdjNovastar]

You are soo good at 3d printing and have the best designs!! I would pay to have thesen3d models! Do you have a shop i could buy them at?

[@EeveeMaster547]

HEADPATTING THEM IMMEDIATELY

[@jamespeterson7125]

I'm always a little surprised to see the number of support or other failures you have from this particular printer. Is that typical, a function of your print complexity, or something else?

[@MihaiDesigns]

Bed adhesion most likely. Have been playing with various options. Will try some Magigoo in the future.

[@DesireDavalos]

❤❤❤❤❤❤❤

[@remcee2]

They look cute! How do you print the colors? My printer only prints 1 color 😁

[@MihaiDesigns]

The Bambu Lab 3D printer uses AMS units which can handle multiple colors and switch between them.

[@duncanmcglinchey9000]

What are the support settings for those trees :0 I've had issues with sticking too much or not supporting enough

[@MihaiDesigns]

It depends on the part. Sometimes you need good support, other times just a little. I make sure the top z distance is equal to layer height. Then it also depends on what temperature you print. Higher makes it stick more.

[@ThompsonStudios]

Man I wish my supports removed that easily.

[@user-fe3od1qi1w]

How do you set print colors? I bought the same printer as yours, but I can not find instructions on the net.

[@Leviathan3DPrinting]

Is that infill shining through the outer layers of white or not enough purge?

[@TheRandomShow7009]

Eevee tail colors are swapped-

[@--3D]

Awesome!! What layer height you normally use? Thanks

[@MihaiDesigns]

0.2mm usually, although here I may have used 0.16mm

[@--3D]

@@MihaiDesigns thank you!!
That's great.
I'm trying to improve with 0.3.

[@spidispider7528]

Is there an umbreon?

[@Waffles4Penguin]

May I ask what settings you use for tree supports? I don’t know where to start setting up that type of support…

[@MihaiDesigns]

Yeah looks a bit daunting at first. I start with tree(auto) supports on build plate only, either Default or Hybrid style. Then lower branch distance and max bridge length. Top Z distance should be the layer height (usually 0.2mm). Sometimes I need to increase the branch angle. Then need to inspect the preview and check to make sure everything is supported and can be cleaned.

[@Waffles4Penguin]

Thanks! I’ll test this out and hopefully it works!

[@SpiritedSky]

Why is leafeon white instead of yellow?

[@aleciawiseall1984]

Do you know the basically Ffion isn’t white it’s yellow and the feet are brown not black

[@masonmcmaster2285]

Hi

[@foxylove_2418]

NENEYTNRHTMRTH TWNAFRWRANAHANRTWTR SOO CUTEEE

[@Voidality]

Cyute

[@TheAngryManc]

Is it just me or is the quality on this machine seriously underrated? It looks terrible for the price point

[@MihaiDesigns]

Not sure. Could look better, although I did mess with the settings a bit. I don't have time to nitpick anymore 😂

[@TheAngryManc]

@@MihaiDesigns not nitpicking but I really don’t think this is the “wonder”machine everyone is raving about.
My i3 Megas spit out cleaner prints than this.

[@theQuiet_Arts]

If u don't make them all... 🐈🔫🐕🔫 it pains me to do this... (LOOK IN REPLYS)
..Read more

[@theQuiet_Arts]

THIS IS A JOKE DONT BAN ME PLZ

[@theQuiet_Arts]

This is a joke don't ban me youtube