Ritetemp Thermostats GUIDE

for model 6030

[@heidiwinner8285]

Thanks so much for your video. I have the world's oldest thermostat but it's close enough to yours, now I can stop years of randomly pressing buttons and finally get down to business!

[@MrMichaelkc]

Your directions worked perfectly. Thanks for the video Joy

[@captainpegs0740]

Low battery power on this control was why my furnace wouldn't turn on! You saved me $100 service call to the furnace man!

[@msYJhere]

You are welcome, thanks to CZcams!

[@aldawright7259]

Thanks! I'll try that before I call the HVAC people!

[@TheSpkezes]

The most annoying thing about this unit, the builder thought it would be a good idea to default the unit to 85°, which has got to be the stupidest default known to any human. Why 85°? Who like 85° during the summer? Anyone? Even during winter, I’ve never set a thermostat to 85°. However the builder/designer must live in Antarctica, because I can’t think of any other place that a default for AC would be 85°, or they could just be a genius. I’m going to go against that and say the guy that set the default to 85° is the most out of touch idiot to ever walk the planet. Don’t forget, every time you have to replace the batteries, it defaults to 85° and you could literally melt metal in your home because the genius designer/builder thought it was a comfortable temperature. Why even have air condition? Obviously he doesn’t and he doesn’t know what a comfortable temperature is. FYI, room temp standard is 72°, not 85° genius.

[@ShakiraYah]

I put new batteries in and the screen literally disappear, I took the top off and reset it and I can barely make out the numbers on the screen. Any idea why this happened?

[@Hhheeeeheh]

Mine goes to 62 in winter

[@jcsul15]

@@Hhheeeehehsame, im trying to figure out how to fix this!! Mine defaults to 62, and when i try to override it to my preferred temp 70, it resets to 62 after a few hours, basically cuts the heat in the middle of the night. Please let me know if you figured out how to change this!!

[@charmaccents6278]

OMG, YES! Mine is 85 for AC and 62 for heat. WTH? It's programmed to go higher at times but I want to stop the programming altogether and just manually set the temp I want and I want it to stay that temp until I change it. How can I do that? @@Hhheeeeheh

[@tomcalderaro7164]

Thanks for this. My heat would not turn off. Unit needed new batteries to read ambient temperature. I didn't even think about batteries!

[@luispalomino5514]

It helps me out a lot thank you!!
Muchas gracias👍

[@LillianaBMS]

very well done, thank you!

[@juliegreen3651]

This thing is a piece of junk. So not user friendly. Thank you Joy for the video!

[@shannonstram2389]

Oh my gosh!! Just moved in to oir new home....and it is terrible!! But she did help till we can replace it

[@nagina86]

This is the most awful pos thermostat ever!

[@sandymiller2853]

This is the worst thermostat I agree. The video is also extremely to slow for me I don't have the patience for the slowness.

[@haleycarpenter7367]

My thermostat looks just like this but doesn’t have the additional words yours shows.. I can’t get it to let me select the time nor days

[@oscarmora347]

Help! I can’t adjust my temperature to set hotter. It just lets me drop the temperature to cool and it’s getting cold now.

[@MsStuff00]

Thank you🥰

[@rogerdildeau7507]

I can't hear what you are saying!

[@battleschool6404]

It’s hot as hell we are 1min in let’s get to it

[@msYJhere]

Battle School Hopefully you got!

[@dread12059]

How come mine doesn't turn on the Cool it just stays blinking and no Cool air runs?.

[@msYJhere]

Ernesto Torres you should ask professional AC guy, since I am not. But I think the connection might has problem

[@beckiehausauer]

Cant hear u

[@pascalinadeclan9671]

How do u set the heater on

[@bonnieellison4147]

After I replaced batteries it starts beeping and flashing. Checked batteries and they are in right. What do I do

[@Vibincat007]

Eat them

[@leeb.7188]

This thing is garbage….Just replace it with a Honeywell.

[@ThunderStruckMTB]

What happens when the reset button is pressed? Will the stat restart itself and work as intended?

[@patriciamagatrator3843]

No. Reset erases all your settings, and loads default, including the "Energy Efficient" settings for Heat & Cool. EE settings are too cold during Heat, and too warm for Cool, at least for Americans.

[@ThunderStruckMTB]

@@patriciamagatrator3843 Thanks. I removed my pair and replaced them with something far easier to use.

[@godsangel2429]

Hello. Our thermostat comes with a stylus pen. How do you set the temperature?

[@msYJhere]

Gods Angel i think pen will work in the same way, but I just used my finger, easy!

[@yevheniikurdin9739]

Hello, how can we turn this thermostat off completely? It is noisy at night and we want to manually turn it off. What should we do? Thank you!!!

[@marcossantiago7070]

You must be hot 80^ degrees uffff

[@rsanchez7111]

Hi there. At minute 1:59. SWING mod. How does that work. ? Thx

[@msYJhere]

rsanchez7111 press menu button, sometime you need to press a bit hard, then set your time and swing, followed by home button to confirm

[@FG-hk5dt]

Women need to focus on children more and this a lot less.

[@jillhutchinson6784]

Nope, didn’t work. Worst thermostat ever