New JB Edition TX16S Mk2 w/ built in ExpressLRS
Vložit
- čas přidán 15. 06. 2024
- Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Pick the TX16S version that's best for you at:
* RadioMaster Store - bit.ly/3jqFjw9
* Pyro-Drone - bit.ly/38wcjkx
* RaceDayQuads - bit.ly/3vlTbxp
* GetFPV - bit.ly/375oDbc
* NewBeeDrone - bit.ly/3NXytg0
* Rotor Riot - bit.ly/3LRyrUO
* FPV Crate - bit.ly/3LRuZJX
* Banggood - bit.ly/3rfJTll
* Amazon - amzn.to/3rcfCnx
MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
-- TABLE OF CONTENTS --
0:00 - The TX16S is the most popular radio in FPV today
1:02 - What's new in the Mk2 TX16S?
2:31 - There are so many variants! What's the difference?
3:18 - The basic TX16S has color screen and touch screen
3:57 - TX16S and Max have Hall Effect gimbals
5:16 - JR module bay and battery bay
bit.ly/3vdDDdj - RDQ 5000 mAh 2S for TX16S
5:56 - TX16S Max adds metal buttons, custom colors, side grips, and upgraded face plate
7:50 - The AG01 gimbal is a HUGE improvement. But do you need it?
10:19 - CNC metal face plate (it's a pass for me)
11:42 - Internal ELRS module vs. 4-in-1 what's the difference?
14:13 - You can still buy the Mk1 Max. Is it worth it?
15:02 - What's special about the JB Edition?
16:27 - How to set up the Bardwell voice pack
Download the Bardwell voice pack at github.com/TheBlueGreen/Joshu...
19:05 - MCK edition
20:08 - 533 edition
20:50 - PyroDrone edition
21:38 - GetFPV Lumenier edition
22:09 - Is that it? Are there any more?
People are asking whether Radiomaster is going to release the ELRS module as a drop-in replacement for existing 4-in-1 radios. I don't know if they will do this, but technically it's completely possible and I have encouraged them to do it.
I really hope so. Having that option would be very nice as I really don't use the 4in1 at all besides occasionally frsky but I want to switch to elrs anyways.
Hope so too
I hope so, otherwise it'll look like they're greedy forcing everyone to buy new radio's!
I just snapped the earth ring of the aerial connecter off my 4in1, I really hope I can just drop in a ELRS internal module.
Radiomaster have confirmed that they will be offering the internal ELRS module as an upgrade, and that it is compatible with the Mk2 as well as Mk1. It won’t be available for a while, as all the internal modules they are building ATM are going into handsets.
Radiomaster have once again been an absolute pleasure to work with for their ELRS integration, and have actively assisted with pushing some of the new features forward for the ELRS project (passthrough flashing for example). These handsets have been fully checked and confirmed by the devs PRIOR to release / announcement, and mine has become my exclusive handset for all my wing / plane models. Not hard to see why they are the most popular handset. Nice review JB.
Wesley, what transmitter did you fly planes with prior to the Radiomaster? I Fly helis on Spektrum and Futaba... I am just wondering if I should go ELRS on a Radiomaster and convert everything to ELRS rx's, or go 4in1 and get an ELRS module?
I just want to thank you and all of the other devs for all of your time and effort… very much enjoy using elrs keep up the great work!
@@jimpratt9520 I was using a Jumper T16 prior to the RM TX16S. I came from quads, and jumped into wings for long range, so I never really used spektrum or futaba, which is obviously the go to choice for plane guys. The RM is a LOT nicer than the jumper, but I can’t comment on how it compares to a futaba. In terms of internal vs external for ELRS, it really makes no functional difference, so it really just depends on what will suit you better in terms of convenience.
@@D18racer51 thanks man! Glad to hear it’s performing well for you!
@@WezleyVarty thanks! Im pretty sure now I am going with the ELRS internal and just continue to fly Helis on Spektrum and Futaba... the RM will be a dedicated Quad radio!
Why can't you have a 5-in-1 module with both ELRS and 4-in-1? After all, Jumper did it with R9 and the T18! The answer is that doing so required the MPM project to integrate the entire code-base of R9 into itself. For MPM to do that with ELRS would be undesirable to both sets of developers. An alternative would be for EdgeTX to add the ability to support more than one internal module. Until this issue is resolved, there won't be any 5-in-1 radios with ELRS inside.
put two modules inside and a physical switch on the back, which connects the wires to either the elrs module or the 4in1
Yeah I’ll hold off until there is both a multi protocol module and ELRS internally. I have too many frsky whoops, BNF planes and helis that I use with the tx16s and getting the Mk2 wouldn’t be an advantage until I have the capability to do both 5in1/ELRS with edgetx.
A 5in1 module is the only feature that will make me leave my X9D+
@@dududu7694 Agreed!
I will wait for a 5 in 1 also. I'm happy to pay for it but I want one radio that does everything native.
I haven't been keeping up with the newer technologies but I'm glad you are still doing this and staying the know it all. Good to see your video. I truly hope your channel keeps growing and you can keep doing this.
I followed the link.. I bought the JB radio.. It looks great when flying my JB edition QAV-s in all it's purple glory.. Thank you JB for all you do..
Hey Joshua just wanted to show you my support by ordering my first radio thru race day quads using your link!
I learned a lot from your videos and want to support you.
just ordered this with the AG1. Cant wait to get this on the simulator. yes im new to this, but im willing to give back to someone that gives so much to this community. Yes i used the link in the description to purchase. Thanks for all you do Joshua!
Thanks for the great review, JB! I'm already on EdgeTX thanks to your video, and funnily enough I've upgraded my TX16S to much the same spec as your own radio haha.
I just used your link to finally buy mine! I got the 4in1 with an external ELRS module because I fly airplanes using dsmx and a few other protocols. Thanks for the info and for everything you do!
Thank you Joshua I got the one with Elrs without knowing, I’m happy that I got the one with longer range 🙌
Fantastic review, Joshua! Thanks a bunch! 😃
Really beautiful radio!
Stay safe there with your family! 🖖😊
Mr JB...
the way you review something is always punctuated with jokes, but what you convey is full of knowledge, I really like the way you review, warm greetings from Indonesia
Thanks for this video spelling out all of the options for the TX16s Mk2. Very informative video.
I love how he flexes his JB version HAHAHAHAHA awesome job man, I started recently in this hobby, and you are an absolute reference to every knowledge about drones. A big hug from Spain!
I have been extremely happy with my TX16S I bought shortly after its release as part of a black friday sale and purchased some of the aftermarket face plates and leather pads the 2 things, beside their good rep they had, that drew me to it was the 4in1 module and they made all the upgrade parts available separately... I have recommended this radio to this that have the budget. I'm not entirely sold on ELRS and it still have some other receivers and a diverse fleet. I was glad I did not have to replace all of my receivers and if I choose to change protocols moving forward I can. This is a radio that was designed to grow with you and for you to personalize to fit your needs and personality.
This just arrived today. Can't wait to set it. Thanks for the color scheme!
Very exciting! Happy to see a JB edition!
Great job on this review Josh, I like your version and the Max with 4 in 1 and the AGO 1 gimbals. The AGO 1 gimbals built-in, and whether I'd paid a premium for them is the determining factor. I'm so ready to move up from my X9D+.
Have TX16s with EdgeTX running a Beta ELRS module. Love it all. Awesome range for my fpv.
Great video! I’ve just ordered the standard 16s as I’m new to the hobby. I will upgrade it when I have some dosh :)
Just pre-ordered mine from your links 🤙
You're a rock star buddy...great video.
I was going crazy looking for the purple JB edition. Definitely my choice.
Thank you for going over all of the differences with each version. Would have liked it if yours had the option for the upgraded gimbals.
Thanks Joshua. I think I will make the switch, but first of all I will bring my Taranis Plus up to date using Edge TX and get some flying time in (it's been a long winter). Hopefully then I can justify the purchase. Your video steers me towards your version of the TS16S, and if I feel the need I will do the gimbal change at a later date. I hope your affiliate links will work for UK purchases...! - of course I will check your other videos to see the latest information, seeing that this is now nearly two years old...
applaud to Radiomaster for giving you SE version even when your review is honest and not bias for max features, MCK's version looks fingerprint magnet.
Too many reviews at same day, but this one to watch 1st then look at others, with all respect to everyone.
Wow that bardwell radio is definitely tempting
Been waiting on this one!! EdgeTx, built ELrs, and it’s purple!
Maaan you almost got me to upgrade to mk 2 i already have mk1. Very detailed review love the detail when you got to the gimbal part i was sure im keeping mine just get the upgraded gimbal
Awesome review jb !!
Sweet, I could buy one of his old TX16S’s!
Mck edition looks amazing
I'm excited - seeing how you can get the 4-in-1 separate as a replacement part, an internal ELRS module drop-in is very likely. In fact, I had emailed RM months ago when they released the Zorro if it would be possible to take the internal module out of that and transplant it into a TX16S - they replied that it wasn't something they officially supported but noted that there was interest. They're aware that people want this, it wouldn't make sense to not provide it!
When JB says hit the like button. I hit that like button. I suggest you all to do the same. For he is one of the very few reviewers who hasn't sold himself to the Chinese companies.
... literally shilling a JB special edition of a radio made by a Chinese company but glad for your support :-)
you're a genius for this intro and i laughed out loud
I can’t wait to complete my setup
It’s gunna be a Christmas present to myself xD
Hey Joshua, Thanks for all the videos. They're super helpful (more than that even) for a beginner like myself. I wish I had watched this vid sooner. I just received my purchase of the TX16S base model and now realized that the version I purchased was the 4 in 1. I really want to go the ELRS route but screwed the pooch on that one. Anyway, would my next move be to purchase the ELRS module? Sorry I can't be a patreon. I'm just a simple artist making art that rarely sells. Perhaps one day.
I just bought a Radiomaster Zorro, and it came with the Bardwell voice pack too.
Great video, thanks. I'm going to download your soundpack, I think that will be fun. Do you have a recent review of the ELRS receivers? Now that your edition is all in with ELRS, it would be great to see all of the options available, both for quads and planes pls
Thanks!
I need that radio in my life, but will sadly have to stick with my QX7S and Crossfire module for now. Thanks for another informative video though.
cool thanks JB!
Done! Ordered the JB edition. Didn't upgrade the gimbals .. decided I'm still a beginner and probably won't appreciate the value and can upgrade later.
interenal ELRS does some like a good bonus
I love my 3 jumpers and my Radiomaster T16,
I'm sure i will love this radio too purple 💜 😄
Great ending:) awsome:)
I got my tx16s max in red/carbon fiber it have the 4 in 1 built in I also use a betafpv elrs 1w module in back and I am pretty sure that that setup is still cheaper and has more options
Just got my brand new JB edition radio master Transmitter!!
Hope you love it!
Thanks Joshua, looked at the site. I only wish that the Joshua Bardwell model came with the AG01 gimbals. I like that color scheme the best. It would be nice to have the TX capability to do both 4in1 and ExpressLRS as well. I dont see a 4in1 module on their site only the crossfire addon.
As always, “I learned something today”. Months ago I bought my first FPV piece and it was this radio and I have really no clue what’s in it and how/where it will lead me to my goggle and quad buys 🙆🤦♂️
Well... you sold me on the JB version, hope I made the right choice!
I want the MINCHAN KIM case!!!
03:17, fwiw there is actually a more basic one.... The non hall version, with the plastic scroll wheel with vertical bars and NO touchscreen hardware. You can tell the difference by looking at them because the plastic scroll wheel isn't knurled like that, it just has vertical groves on it.
Ordered!!
I just ordered the jb drone hd kit and the jb radio. Im going to add dji 03 air unit and probably a pair of googles. What do i need a elrs receiver and swap it with the dji? Ove done rc cars, but never drones
Yes, you need an ELRS receiver. Happymodel EP1 or Radiomster RP1 are good choices.
Got both the normal TX16S max and the MCK edition. The metal faceplate is really nice for people with hot hands, will keep you cool for a while. Besides that, the radio is noticeably heavier and EXTREMELY reflective, can blind people with rainbows. I disagree with Bardwell's comment about the edge of metal faceplate being annoying since it didn't bother nor affect me at all. The colour scheme you get is by chance as no two will have the same pattern. However there a two primary colour schemes you can get which will either be dominantly pink or dominantly blue. I got lucky and got a really nice blue pattern with a little bit of pink closer to the top which was what I was after.
Was mad for about the first 3,in, as I just got my Tx16s. Then I realized the main improvements are not that big of a deal to me (gimbals might be nice down the line, charge circuitry is nice to have but I use the big Li-Ion pack, so wrong polarity is really not too much of an issue). Maybe I'll upgrade the rotary switches down the line
I still love my t16 pro hall .. might be time to upgrade to radiomaster with internal elrs
Btw, for anyone wondering, the second hole in the back plate that had the rubber stopper in it, opposite the headphone socket, is there for DIY expansion... ;)
I have owned many high end Futaba (12ZH, super 8u)and Spektrum (dx7) radios, nothing has felt as good as the 12z. I love edgeTX on my TX16S and the multi protocol, I wish I could merge the two, switch and input mechanics are way more refined on my 12Z. Just one dudes opinion, cheers!
0:22 - If I could get one of those...it would be like a dream coming true....😅
Hey there. I would like to state first off that I am so new to all of this that i don't even have a quad yet. In what I have seen recommended around the community is to get a good quality RC transmitter, use that in a sim and then get something like an emax tinyhawk to progress up to. If you purchase the ELRS version which for quads I build in the future is going to work great for, but what would my option be for a starter quad? I'm sure this is a relatively simple answer but I appreciate anyone looking at this. Thank you!
Great info as always JB ... nobody seems to mention the 2x hole lanyard position on the max I have the standard and feel the radio always wants to lean towards me
Wondering if the 2x hole with crossfire stays more level or even away .. small thing but hey we’re all obsessive eh!🤪
That TX16S will forever be the defacto radio for most who need a full sized/switched out system. When it first came out it seemed like another cheap radio but with all the upgrades & improvements over the years it really defines its own space. Spektrum should have OEM'd it at least might have kept them profitable. LOL
I would like to see a break down of all the stuff that’s in those radio and all the bells and whistles it can do.
9:46 with the zoom, hahah, so funny! 🤣🤣🤣
Thanks for another good video JB! I recently bought the TX16 Max and found out that is is super bad with Immersion EzUHF. The channels jump around if using EzUHF on high power. Do you have this tx and possibility to plug in test on the JB edition mark 2. My jumper T16 with swapped internal flat cables works perfectly with EzUHF.
I like how you didn't edit out your double clicks in the sound pack lol
i feel i may be one of the flysky problem issues exspress lrs may be the saviour
I do head-tracking gimbals on my fpv planes, so I need that trainer port.
Wow 4 radiomaster can i have one? 🤣 super nice radio🤘
i am so happy that they are upgrading their v2 16s .......................but im still waiting on the zorro pre-order is something wrong with their assembly line??
Completely new to the hobby but have been learning so much from you!
I was curious, what if you want a radio that handles every protocol. Like a radio with an internal ELRS and the 4 in 1 module. Is that possible?
Hey Josh Great video and review of the New Radiomaster TX16 , I just have one question about it, I will be ordering it with the 4n1 because I am still flying fix-wing and helis . But I wanted to ask if a headtracker system would work with the speaker jack.
Hey JB, you’ve been a lot of help for a long time and I tend to just search through your library when I need to figure something out. One thing I am not able to find is a tutorial on how to setup the T16 for a flight simulator. It would be cool to see how you do this, please and thank you.
czcams.com/video/SpuXqNakP2A/video.htmlsi=z1ifdra2w4_dNS9M
Hi Josh , thanks for your lesson and I really learned something today. I already bought the Max II version with Ag01 gimbals ( that still in preorder today) but I selected the 4in 1 module cause I’m switching from my old X10s and I got my all my rx’s frsky protocol. I wanted to try building my own ELRS module to see how it will work, but my question is, why Radiomaster doesn’t selling the spare internal module with ELRS as they doing with the 4in1 internal module ? They also raised the 4in1 external module to 60/70 $ so isn’t cheap to me to buy it on second time…. I’m sure they are playing with prices as Frsky did on past, and I hope this will be not again a matter to move people to something that is commercial rather than more efficient as radio link as happened with Frsky . We will see
Goddamnit, just finally got a basic TX16s (with open TX) less than a month ago after literally years of being on the fence...
Would be cool made a external antenna port for internal module like on the Frsky x20s to run a stronger gain antenna also wish crossfire worked on the x20s . I feel x20s have slight edge over ag01 with their capability to change the axis of each gimbal a few degrees either way for those who say are use to giving yaw left or right during full throttle movements u can change the axis to take away the accidental yaw during full throttle blips. Time to do 160mph under gas station canopy passes now .
Joshua I just bought this radio the other day. Do you have a video showing out to use it. LOL I am new to the hobby and I am completely lost!
😂im definitely all in with express lrs babiiiii💪🏻
Hi great video any chance you could send a link for receiver, and where to buy from .I'm new to this modelling so trying to make the best possible choices
Dont know if someone has mentioned this already but I would prefer if that JB version has a screw on antenna, that way I could change it out for the Moxon antenna's that might work a bit better? Is there a difference in range and penetration with the Moxon vs dipole?
Well, if they ship with EdgeTX as default I guess I can install it as well on my Max mk1.
Great video about all the new stuff. A $550 Radiomaster tho... that's more than a X20S and with the base model and the Jumper T18 V2 more than $300 cheaper... yeah... no. My Max was expensive enough on sale with the FlySky PL18 gimbals. PL18 gimbals are better than the AG01s btw and with Edge 2.6 onwards they are auto detected so they are a 100% direct drop in. Hawk RC sells the adapters for $33 and either the black or the red adjustable PL18 gimbals for $130 so price is the same. Get the PL18s.
Hi Joshua, regards the tx16s max I'm curious about what you said about not liking metal fascia as it gets too hot and has sharp edges, I think I would agree and if I get one I wouldn't want metal either. Looking at the MK2 max versions they seem to be carbon fibre effect so are they metal or plastic? If plastic I think I will go ahead and get one. Thanks for the great reviews 👍👍
what (if any) mk2 parts can be used to upgrade older tx16s?
can we swap to the new mk2 6pos buttons for blue LEDs? or upgrade to the better POTs & Sliders?
can i put the guts of a mk1 into the mk2 shell?
It is great that Radiomaster is releasing all kinds of improve versions of tge TX16S but if I was Radiomaster, I would put a bit more effort in making sure their radios are not in backorder status all over the place!! What good is to announce new and improved versions of the TX16S if no one can get them!! Mine it’s been on backorder with GetFPV since the end of Feb.
this is great if only we can get a TX20s max with both 4 in 1 and elrs. might not be to useful with a drone but a fix wing RC and some high end heli maybe. If they make that they will really start competing in the RC world. Specifically spektrum and futaba
I just got this radio July 2022, but it did not come with the additional voice packs. You'll need to get these separately.
I'm in high school trying to build a model plane with some friends. Any chance you're looking to get rid of one of those four TX16S's?
Sure. Email me and I'll send you the base Hall Effect one :-) joshuabardwell@gmail.com
Hey @Joshua Bardwell i probably missunderstand something, but i m willing to go buy the tx16s JB edition with built-in Express LRS cause i like the look and want to go for ELRS, but i was wondering if buying a normal version with a Ranger 2.4Hz ELRS module, was different, is there any difference on (for example) ranges between the built-in and the module, or does they work the same. I don't ahve all that much knowledge, and coucln't find the information! Ty for your help!!
I bought your radio but am having problem finding the model wizard. I held the bottom scroll but never did come up. If I can get pass this I think I can learn what I need for the planned, usage I have for the radio. One other question will the Express ELRS work with ELRS. I thank that’s what’s in my Mobula7 Drone.
I may ask in RC Groups if there are any members in the Austin area.
By the way this is a very will made radio
There is still a cheaper alternative to radiomaster which is the Eachine TX16S with adjustable gimbals, would have been worth a mention Joshua ?
@Joshua Bardwell An upgraded version with AG01 (ELRS) at 320$ would have been so cool :D
We've got a math problem :)
When you switch to AG01 : price up for 130$ more... but the real math must be : 130 -58 (price of the 2 bases guimbals) =72$.
I mean : they REPLACE the guimbals , They do not send you the basics guimbla + the AG01.
(by the way JB mention a 160$ upgrade but AG01 only cost 130 bucks) ...so in my opinion pyro drone do not make a discount, but apply the REAL price !
Very great review for the rest, thks !
I assume it can compete with a tbs tango 2 with regards to distance?
Hi Joshua I'm a spektrum user and im over the bull dust and looking at the tx16s as a replacement will the base model cover all bnf models or will I have to get the one with the touch screen and top shelf gimbals
Yo @Joshua, the word I think you may have been looking for is, "Irridescent color scheme!"
hey joshua i got the jb mk11 and i have a babyhawk with tbs crsfr do i need a crsfr mod or a express reciever to get ma drone flying cuz i don't see it in the radio. thanks for the vids lotsa info