John Deere 1640 Ho/ Lo Part 2 Assembling and Timing the Clutch and Planetary
Vložit
- čas přidán 22. 08. 2024
- I assemble the Hi /Lo clutch and planetary on the John Deere 1640. I cover timing the gears which is very important on these.
Hello Im Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advise to customers.
Parts seen in our videos can be purchased from www.queenslandt...
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email info@queenslandtractorspares.com.au and we will help where we can.
I do try and help with technical advise at bundybearsshed@gmail.com if you have a question or are having trouble with your project.
Just can't wait for the handy tip # 22
Thanks for sharing your experience
Thanks Adrien.
Great videos. I am getting ready to rebuild my pto clutch/brake and my hi-lo. Watched your videos and it has eased my mind on the job. That little tool you built to compress the spring is the cats meow. I'll be building one before I start the job.
Great to hear! Good luck you should go well.
@@BundyBearsShed question for you. I pulled it apart last night and found no issues with it. Before hand it had been slipping thought it was the clutch replaced it no change. Checked trans pressure was at 144 psi at 1500 rpm. Figured it was the hilo, pulled it all out couldnt see any damnage... what else do you think it could be?
Thanks for your videos these have been extremely helpful with my 3140 bloody hydraulics can be a nightmare
Glad to help
you need three hands and a small dog to get that back together nice job
Yeah I have a brown dog but not mechanically inclined.
G Day Lance, nice work mate what happens if you don’t time the gears in the pack? I would have thought the gear theta spacing was all uniform!
It will bind up and blow up the gear train.
Hello Lance love the videos ,maybe you will see this maybe you wont,anyways have you ever rebuilt a 40kph planetery as i'm not 100% sure how to time it because it dose'nt have the 2 dots on bottom gear only a line on top gear witch is bigger than the bottom one it didn't seem timed correct so to get middle gear with v markings out you have to remove one planetary gear and gears are angled,i have set it with the line at top and it angles down to align with v on centre gear does this sound correct?.
I git the email, hopefully it is answered.
Hi Lance. Great videos. The are very informative. I recently purchased a 2750 with issues. No hydraulics below 1500 rpm. I cleaned sump screen, replaced filter and checked filter bypass valve. Only 1650 hrs on tractor. Thinking trouble might be a cracked tube or something , I split unit. Went thru hi lo, pto, piping and orings. Did not find anything. Any ideas?