FC200 vs VVDI Multi-prog. The best Original ECU /TCU programmer under 1000 euros.

Sdílet
Vložit
  • čas přidán 1. 04. 2024
  • These two programmers can be found at a price similar to the clones produced in China.
    I don't think anyone has reason to use those clones anymore.
    I recommend using original products ! Video for information purposes !

Komentáře • 87

  • @medhamoud4492
    @medhamoud4492 Před 3 měsíci +2

    We really respect your hard work and your attitude to share that information and your knowledge.
    I hope you succeed in your life.
    All my respect

  • @vladalexandrucojoc921
    @vladalexandrucojoc921 Před 3 měsíci +6

    New grafic with Plus and Minus, even the novice users understands the comparison. I had in mind the fc200 but i didn't buy it, i had writen you about the multiprog and now you made a great video. Thanks for your time that help us to see beter a tool .

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci +4

      you are one of the subscribers who always posts. I got a lot of encouragement from you. I always try to keep in mind the demands of subscribers like you. This is my way of saying thank you to those who support me.

  • @vastorana74
    @vastorana74 Před 3 měsíci +1

    Thank you again for your videos. I bought vvdi multiprog when released and have just seen unbox vids. So glad to see see a video with someone actually giving useful information. Keep up the great work. Very much enjoy what you do. Thank you

  • @Omar-mz2oz
    @Omar-mz2oz Před 2 měsíci

    Thank you very much ! For your time and for your explanations! All your videos are great ! I was thinking to buy a cg9s12 thanks for open my eyes !!

  • @nickmak3162
    @nickmak3162 Před 26 dny

    Thanks for the video. I’m going to consider the multi prog, I wouldn’t have known about it if not for this video. Also learned about the VCX tool from your other video. Really helps to save money when starting a small business. Thank you

  • @osvaldocostanogueira7171
    @osvaldocostanogueira7171 Před 3 měsíci +1

    Great video, very clear and direct to the point. ❤

  • @abreiz1
    @abreiz1 Před 3 měsíci +3

    Perfect timing Yoyo. It is like you heard me as I was confused about my purchase. Always informative, stright to the point and helpful. Keep the good work and Thanks a lot as always.

  • @miqbal1981
    @miqbal1981 Před měsícem

    another beautiful comparison👌

  • @scorcher617
    @scorcher617 Před 11 dny

    You had my support at unboxing videos I hate them always have for the reasons you said if you don’t how it works don’t show me I don’t want to learn with you , I want to know if it works and I like that you show us. Thanks

  • @SpringvisualTk
    @SpringvisualTk Před 3 měsíci +1

    Amazing comparison, thank you so much, I never expected such detail comparing abilities per make!!
    Please continue if it’s not too much work, I bet you did it since you were curious yourself, I also invest a lot more time when I have personal interest comparing and researching
    Also, since you compare to FC200, I assume multi-prog does all by bench
    Feel free to ignore this: how important is checksum correction? Is it worth getting Kess/Flex just for that? (I’m a locksmith and rarely do ecu work)

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci +1

      Exactly as you assumed, the first time I entered the menu to see what it can do. I don't enjoy talking about a programmer if I don't know what he does. I had 1 month to return it if it didn't cover my need.
      Thanks for watching 👍

  • @franciscodiez5825
    @franciscodiez5825 Před 3 měsíci

    Another Awesome video, thanks for sharing! Really appreciate all your videos, always looking forward to the next one.
    What program/software would you recommend for the checksum?

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci +1

      I usually use it from the programmer. If I write with Flex i use that. If it doesn't work I go to tuning software. They are the best .

  • @diyleonmotors10
    @diyleonmotors10 Před 3 měsíci

    Hello YOYO!
    Thanks for the Video! Another great information. keep up the good work!
    I have just one question for both programmers. Do the programmers do also a CVN (Calibration Verification Number) Correction when performing the Checksum Correction?
    CVN is important for the inspection in many Countries now since 2018.

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci +1

      Hello. Not at the moment. I'm sure VVDI will have this option. This programmer has a good start.

  • @HelgiThorisson
    @HelgiThorisson Před 3 měsíci

    Great comparison.

  • @planetpowersteerings3502
    @planetpowersteerings3502 Před 3 měsíci +2

    Thank you for the detailed comparison of the two tools. It is very helpful to have a side-by-side comparison to better understand the features and capabilities of each tool. I am working in an EPS rack repair service and am looking for a suitable tool that has EPS module MCU read and write capabilities. Can you suggest a tool that would be a good fit for my needs?

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci +1

      Hi,
      I have no way to answer this question because I don't know which MCU is in these EPS. You should know better what MCUs are and then make a comparison with what these programmers offer.

  • @daudajalloh6183
    @daudajalloh6183 Před měsícem

    Great video

  • @user-tz4oz4vg2o
    @user-tz4oz4vg2o Před 3 měsíci

    Thank you for your video is very interesting and useful and tell me which one to choose multi prog more coverage works better

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci

      It's up to you. If I have to decide I will go for Multiprog, but it's your money you must decide.

  • @jackgates6949
    @jackgates6949 Před 3 měsíci +1

    I use AT-200 (older version of FC-200) and only need for BMW DME ISN reading. Is there any advantage to this new VVVDI for me and my limited needs? Great video and LOVE the accent!

  • @ucustanbass
    @ucustanbass Před 3 měsíci

    scripts are included in multiprog or have to buy after?
    thank you for your time.

  • @eye-ann4937
    @eye-ann4937 Před 3 měsíci

    Maybe xtool vs SMOK coming soon?, keep up the good work, thanks

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci +1

      I don't promise because I don't have Smok. But if I find a friend with this programmer I will.

  • @Deltarom
    @Deltarom Před 3 měsíci

    Wish to see a comparison with Flex as well specially for Mercedes. Thanks.👍

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci +1

      Ok.. I take it in mind and I will make sure one video with Flex too. 👍

  • @jorgemat8080
    @jorgemat8080 Před měsícem

    I use the fc-200 and i have a question for you. On a bosch ME7.5 for Audi to do immo off when it asks to load pflash which file do i choose? When i read and save it read eeprom, flash, and extflash. There is no pflash. So i'm a little confused as it loads both eeprom and flash and accepts the file size. Thank you for any advice.

    • @YOYODiagnostic
      @YOYODiagnostic  Před měsícem +1

      This ECU has eeprom ST95040 external you can read separately . Or you can use eeprom ( DFlash) read with FC200

    • @jorgemat8080
      @jorgemat8080 Před měsícem

      @@YOYODiagnostic thank you.

    • @YOYODiagnostic
      @YOYODiagnostic  Před měsícem

      @@jorgemat8080 👍

  • @canoaslan1011
    @canoaslan1011 Před 3 měsíci

    Can you atleast do some unboxing for the fans at Christmas time?

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci

      I promise you I will do unboxing but I will also make a test 😊

  • @NGL_Voxify
    @NGL_Voxify Před 19 hodinami

    What functionality did you test? Just b/c they have big list means nothing ...fc200 cant do the lot of functions of listed ecus

  • @irfankhalifa5647
    @irfankhalifa5647 Před 3 měsíci

    @YOYODiagnostic Can this repair bmw/Mini FRM too?

  • @mohamadosman1933
    @mohamadosman1933 Před 2 měsíci

    I need ecu devices and mcu devive
    So you advice me to buy just multiprog or buy both of devices multi and fc200

  • @islanddiagnostics3925
    @islanddiagnostics3925 Před měsícem

    If I had to choose between the HexProg or the Multi-Prog which one would be better?

    • @YOYODiagnostic
      @YOYODiagnostic  Před měsícem +1

      I don't have HexProg. Sorry I can't answer your question.

  • @8power0
    @8power0 Před 3 měsíci

    YOUR CHANNEL IS REALLY GOOD ,, I LIKE IT FOR THE TOOL COMPARISONS NEW SUBSCRIBER . I HAVE TO WATCH EVERY VIDEO ON THIS CHANNEL AND LOOKING FORWARD TO THE NEW VIDEOS THANKS SO MUCH FOR YOUR TIME !!!!!!!!!👍🏼👍🏼👍🏼

  • @aboxofchocolates5901
    @aboxofchocolates5901 Před 3 měsíci +1

    4:30 The names of the brand are in Chinese character order. I guess it is because the software was developed in Chinese first then translated into English.

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci

      True. All these aftermarket programmers are Chinese companies. (Launch, Autel,VVDI, CG, Xtool, Topdon, Thinkdiag etc.)

  • @reirizjose
    @reirizjose Před 3 měsíci

    Hi, do u know if multiprog can read and write bmw isn in ecu??, thanks

    • @SpringvisualTk
      @SpringvisualTk Před 3 měsíci +1

      It will read and write, but not modify the data, they are working on custom scripts that can do things like that in a click, but it’s not ready yet.
      Read, send to a file editor person, write

    • @reirizjose
      @reirizjose Před 3 měsíci

      thanks a lot

  • @siyaonline
    @siyaonline Před 3 měsíci

    VVDI Multi-Prog is the best especially when you have an option of reading chips and MCU's and also be able to read immo data

  • @filipefernandes777
    @filipefernandes777 Před měsícem

    Does the MULTIPROG do what the VVDI prog already did as well?

    • @YOYODiagnostic
      @YOYODiagnostic  Před měsícem

      Similarly, the only plus is ECU reading and writing

  • @alexn.2199
    @alexn.2199 Před 3 měsíci

    Can you show differences between vvdi prog and multiprog

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci

      Ok I will post a video soon. I have a video but no time for editing. 👍

  • @ADDAUTOMOBILESERVICES
    @ADDAUTOMOBILESERVICES Před 3 měsíci

    Pls what do you think about dc706 obdstar

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci +1

      It's a bit more expensive than Vvdi so I wouldn't have a reason to buy something like that. Vvdi multiprog has a very large database when we talk about Eeprom and MCU. The second thing to mention is that I'm not an Android fan of programmers, I prefer Windows operating systems. To be able to modify those data, I always have to export the data to another device and after modifying it, copy it again. for me this is wasted time.

    • @ADDAUTOMOBILESERVICES
      @ADDAUTOMOBILESERVICES Před 3 měsíci

      @@YOYODiagnostic thanks boss

    • @ADDAUTOMOBILESERVICES
      @ADDAUTOMOBILESERVICES Před 3 měsíci

      @@YOYODiagnostic wish you can compare dc706 vs multi prog

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci

      @@ADDAUTOMOBILESERVICES 👍

  • @vvsousa
    @vvsousa Před 3 měsíci

    Hello. Does this program work on airbag?

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci

      Fc200 or VVDI

    • @vvsousa
      @vvsousa Před 3 měsíci

      @@YOYODiagnostic If the vvdi does rest in airbag. thanks

    • @YOYODiagnostic
      @YOYODiagnostic  Před 2 měsíci +1

      @@vvsousa will be a next video. 👍

  • @alexsandrolopes3388
    @alexsandrolopes3388 Před 2 měsíci

    Muito bom seus videos as explicações me fala cg100x e um bom programador cpmrei multiprog poderia fazer u. Video sobre cg100x obrigado

  • @AsadGamer
    @AsadGamer Před 3 měsíci

    Great video
    But a great advantage for fc200 for mercedes benz.
    The vgs-nag3 9g tronic
    that vvdi multiprog doesn't have.
    I hope it gets added in future updates to vvdi

  • @Unbekannt-ov5gb
    @Unbekannt-ov5gb Před 3 měsíci +1

    Multi prog kann kein med Steuergeräte lese bereits ausprobiert 😢😢

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci +1

      Danke für Info. 👍

    • @Unbekannt-ov5gb
      @Unbekannt-ov5gb Před 3 měsíci

      @@YOYODiagnostic bitte heute kam ein Update runter und ich konnte med 9.1 lesen davor war es nicht möglich

    • @YOYODiagnostic
      @YOYODiagnostic  Před 3 měsíci

      @@Unbekannt-ov5gb 👍

  • @mohamaditani451
    @mohamaditani451 Před 3 měsíci +1

    i bought fc200 2 days ago :(

  • @mtcarcare9077
    @mtcarcare9077 Před 2 měsíci

    Which is best tool for read write of this ecus bosch md1cs08 &delphi dcm7.1ap &2.7ap&2.5