Tips and Tricks for Laser Engraving with WeCreat
Vložit
- čas přidán 4. 07. 2024
- HOW TO LASER ENGRAVE A FULL WRAP TUMBLER WITH WECREAT
I am so excited to share this process with you! In this tutorial, I am demonstrating how to set up your WeCreat Laser Engraving and Cutting Machine to do a full 20 oz tumbler wrap. Prior to contacting WeCreat, I was only wrapping 7/8 of my 20 oz tumblers and now I know how to add the metal rods to engrave the full tumbler, from the top to the bottom.
I hope you find this helpful!
The materials I am using are listed below:
✅WeCreat 20W Laser Engraving and Cutting Machine: shrsl.com/4jc6a
✅WeCreat Rotary Pack - shrsl.com/4jc6r
✅20 oz Powder Coated Tumblers: amzn.to/44OnAWy
✅Mr. Clean Magic Eraser: amzn.to/4ajNpPm
The links above are affiliate links and I will earn commission from your purchase at no additional cost to you.
My Equipment:
☑️Adjustable Table: amzn.to/3NOSGGb
☑️Craft Desk: amzn.to/48dKUxX
☑️Heat Press Cart: amzn.to/4aEz1m7
☑️16 x 20 Walapress: craftingwithdelonda.com/16x20...
☑️Heat Press Top Cover: craftingwithdelonda.com/topcover
☑️Heat Press Lower Platen Cover: craftingwithdelonda.com/lower...
Join me on my other Social Media Platforms:
Come and get social with me:
👉Links to all of my socials: linktr.ee/craftingwithdelonda
👉My Website - craftingwithdelonda.com/
👉My Etsy shop - www.etsy.com/shop/craftingwit...
👉Instagram - / cricutingwithdelonda
👉Facebook - / 272801197679910
👉Pinterest - pin.it/2ROzvx3
👉Creative Fabrica - craftingwithdelonda.com/creat...
👉TikTok - / cricutingwithdelo
Thanks for watching!
Bye
#laserengraving #wecreat #engravedtumblers
14:10 where you speed up the video it appears the tumbler is not turning concentric? If so that will make the focus change and cause inconsistent engraving. At least this was something that affected my laser engraving from many years ago. Maybe they have improved technology and these hobby engravers are more forgiving.
I see how it looks. I'm very pleased with how all of them turned out. Perhaps if I was into sales, I would strive for perfection; but since I am a hobbyist, these are all perfect for me.
You get on my nerves, now! Just when I said I didn't have to make anymore purchases. I need this machine now :/. These came out so cute!!! :D
😂😂🤣🤣😂😂Listen, keep watching but also stop! I want the 40W now...
Got my 40 for Mother’s Day. Just waiting for it to so excited. Thank you. Keep the wecreate videos coming.
So glad I found you!
Thank you so much 💓
Thank you for another terrific video using your WeCreat laser. I got my machine about the same time you did, and I'm having so much fun with it.
Thank you ❤️
I'm literally falling in love.
Same here! Such a great addition to my Cricut and sublimation projects.
This video was a life saver! Thank you for sharing 💕💕💕💕
You're welcome
Okay, im here for your hair!! Oh my gosh, its beautiful and grows so fast! Wow!!
Thank you and yes! I'm going to lock it up within the next month.
Yess! I love the hair! Another awesome video ! I do have a quick question about printing on Tshirts from Cricut how do I stop thethe patchy print from engraving on the vinyl
Love this!
Thank you!
That's Awesome! Adding to my wish list!!!!!
Thank you ❤️
Amazing, but what is so fantastic is the knowledge and the ability to learn so many new programs and machines.... this is absolutely your calling....You Rock!!!!🎉🎉🎉
Thank you! I appreciate that.
GOOD EVENING EVERYONE😀
❤❤❤
Thank you…. I see i have to learn ALOT aboute laser & engravjng but i dont have that machine (or other lasermachine yet) so i am making notes in my crafting journals and semave them and the videos for the future. Thank gou much Delonda ❤
Thank you for watching!
They came out really nice.
Thank you!
These came out great…❤️❤️❤️
Thank you
I love this Delonda. ❤
Thank you
Beautiful🎉
Thank you
Thank you so much!! I am going to setup my machine and get started!!
Yes! Come and join me!
Good video thanks looks good ❤
Thank you ❤️
Love them all! Watching lives today is a hit or miss. Cannot access much today but glad to see the replay
Thank you ❤️
I Love them. I need that blue one.
I love that one too. Thanks for watching.
Thanks for this video, I like that you show the software that comes along with machine.
Thank you ❤️
😅 love,the maker,still on his box 😅😮😅😅😅 since one year 😅 so i finish to fix the place and next week 😅i will open this box 🙈🙈🙈👍...to START again 😅... I am so blessed i meet you beyond this screen...and hope to meet u by u side one of this year 😅... 😊
Open that box and let's get going!
I like what I see with the WeCreate, especially the software. Tumblers are nice and I prefer working with svg's
Thank you ❤️
That preview setting is fire! My Xtool doesn’t have that and I’m super jealous right now 😅 that would make measuring and lining tumblers up so much easier.
I love it feature too. It helps me to make sure that the design goes all the way around.
Thank you for this. i want the 40watt also. I just ordered the 2watt IR laser and the pass through from them. I'm looking forward to more videos.
You're very welcome! I want the 40W so bad; but I know if I bring one more machine into this house, we are going to have a "conversation" lol! I am waiting for my 2W to get here.
Love your videos. There was talk about making the 40 Watt interchangeable like the 2W but nothing confirmed yet. Fingers are crossed.
Ooooh, I may need to ask about this.
@@brendaduncan9093 I heard the same as well during one of their live videos. yes, let's keep our figures crossed.
Hello everyone
Husband!
❤❤❤❤
Thank you
Hey Delonda!!! I love watching you craft! Have you tried LA Awesome @ dollar tree ? Cleans it up easy peasy. I prefer SVG all the way but png gives more layered look to me. My next try for my wecreat is the living hinge for a book cover and purse
Thanks for letting me know! I purchased some of that Awesome but I haven't used it yet.
They are both beautiful! Do you know if you can do tapered tumblers as well? Great tutorial!
Thanks and yes! I have seen others do 40 oz tapered tumblers. I was just excited to do these 20 oz.
GREAT VIDEO, I like the svg best. Have you tried doing a tumbler with the smaller bottom. I'm getting ready to buy this laser
Thank you ❤️
I haven't tried it yet but I will soon. I love this machine so much.
I’m really interested in buying this machine one day but one question! Did you not have to purchase the 2W infrared laser as well? I was under the impression that the 2W was used to engrave on tumblers…so I was a little confused…
I didn't purchase the 2W because it was not available when I got the laser. However, I just received the 2W and I haved not opened it yet. You only need the rotary tool to engrave tumblers.
Do you think it’s the color of the pink that wasn’t as sharp? Or just the type of file?
I think I should have used a higher power setting and more sharpness in the setting.
I’m an SVG person
Me too!
I am having to make a decision embroidery machine or wecreat 🤦♀️
Thanks for the video either way!
Consider your purpose. If you are getting one or the other, is it for a hobby? To go into sales? You will probably be able to make sales faster with Wecreat. With embroidery, it is going to require a bigger initial investment. Take your time.
Man I really didn’t want to watch this because I already want one but I had to support 😂😂😂🫶🏾🙌🏾
Well, I am glad you made the right decision 🤣🤣