I made the worst RC car EPIC
VloĆŸit
- Äas pĆidĂĄn 7. 10. 2021
- Get complete digital privacy for $2.08 per month (for 3 years) AND two months free:
www.privateinternetaccess.com...
Get Ryft here www.avantlink.com/click.php?t...
Treil Upgrades - www.trealhobby.com/collection...
Motor/ESC combo www.avantlink.com/click.php?t...
2 Speed Set www.avantlink.com/click.php?t...
Shift Servo www.avantlink.com/click.php?t...
Cheap Shift Servo (you will still need the servo horn from above servo) www.banggood.com/MG90S-RC-Mic...
Steering Servo www.banggood.com/JX-Ecoboost-...
Controller www.avantlink.com/click.php?t...
đ§ĄMy instagram / talbotkev
đMy Facebook page / kevintalbotvideos
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Although a lot of my videos are RC Car videos you will also see other stuff like business, Amazon FBA, eBay, Monster truck, Cars, insurance and many other topics.
#Kevintalbot #rccars #rc
Get complete digital privacy for $2.08 per month (for 3 years) AND two months free:
www.privateinternetaccess.com/KevinTalbot
Kan ay have a rc boat Atomic
How much did the whole monster truck cost
I am your fan from malaysian .. every day I see your video, I see it on youtube and Instagram .. â€ïžâ€ïžâ€ïžđđŒđđŒđđŒ
where are the 202 mile hour rc car�??????
I think is Cheap one
I like how every corner he takes there is rc cars
You know whatâs more fun than 1 RC car?
*Loads of RC cars!*
So jealous. I am out driving all by myself. I want and need this kind of community. Looks like a wholesome and including community full of fun and enjoyment đđ€©
You've put a lot of time, money and effort into this truck Kev. So it's good that it runs well, how you like it.
I'm not sure how many other people out there would be as determined/patient when trying to make the truck better.
Anyhoo, looking forward to seeing it run with 6s.
A few of us are fully upgrading the Ryft. It's $1200 or more in upgrades but it is well worth it.
So I just roughly totalled up the cost of the Ryft and all the current parts Kev has fitted to it (from my understanding)
The total comes to at least $1,732, this is of course not including the previous upgrades Kev has fitted and broken/removed over time.
So we're easily looking at over $2k to get it to this point. It's depressing thinking about it really, to any sane person this is lunacy, but we all know Kev is not sane which is why this monstrosity exists. You could easily afford a fully kitted out X-maxx and still have some change left over.
All in the name of entertainment and "science" :D you nutter Kev. Love your content :)
all worth it for the fun and footage!!
@@KevinTalbotTV Couldn't agree more! đ€
@@KevinTalbotTV thats what makes this hobby awesome
Tumble rumble đ
You could almost buy a crappy Subaru or something and go off-roading for that amount
The rock bouncer is Absolutly ePiC
@@lbsrcs no spam please
I reckon this would go really well in the mud!
The problem is itâll get in those grooves, anyway that would be epic!!
@@bigboyeatdrinkhoon6082 9 oil.
thats what there best at with the right tires
It would probably need the black mambas again for that
with paddle tires
Love the build Kevin. Looks great been buying treal parts as mine breaks been fun upgrading. More Ryft content please
I think Kev's idea of "crawling" and mine are quite different. Still looks fun though!
he does say there is no wrong way to RC. whatever makes yourself happy is the asnwer
Ha, great job. You now have a unique axial rock bouncer, which digs holes like a chain saw. Epic. Thanks for sharing. John
Kev never lies, I trust him on his monster truck
Love the vids Kev, especially the monster truck build one's... going nuts here mate that build is epic and I'm getting withdrawal symptoms.
A friend of mine put a huge brushless motor in his home made rock crawler back before there were crawler kits. I literally fell down laughing and almost wet myself. It could flip itself over with even moving forward. Left ruts in our track. It was insane! Good times.
So happy to see another vid of you đ. You are doing some epic in-air moves.
I refuse to buy a car where you have to replace everything but the chassis out of the box to make it reliable
Iâve got one and just replaced the motor and esc and it works great.
Absolutely right đ
Same
For some people that is part of the hobby. More of the engineering side of it. Itâs all personal though which is whatâs Great about this hobby nothing is correct nothing is wrong you just do what you like
welcome to life
Hey kev, most monster trucks have a plexy glass floor so they can see where they are going when popping wheelies.
It has it but is covered by a sticker so it isnât damaged while building it
I love you video
I love you videos
and I thought I could tell where I was going by teh flight of the neighbor's bird feeders.
Kevin, love your channel man. Just started getting into RC's and enjoying the content. I gotta ask you to PLEASE get an ECX Temper Gen 2. I know they aren't the best crawler but it's my first hobby grade RC and I'm so damn interested to see what you would do with one! Also pretty impressive little machine for the price. Cheers!
Yeah its epic now, after spending $500 on the kit and probably $2000 in upgrades. It better be epic!!
I would still rather have a crawler and a basher instead of two rolled into one not so great package.
this rig is rock bouncer. not a crawler not a basher.
And what is a rock bouncer you big whopper ? It's a cross between a basher and a crawler
@@jacksrccars347 actually your wrong, a bouncer is just what it says , not a crawler or basher
So it's good for nothing ultimately. Rock bouncing is just uncontrolled crawling . I can see this RC car being discontinued soon. Who wants to replace practically everything to have a functioning RC car ? Yes upgrades are a great part of the hobby but for a rig of this price I expect better out of the box. In my eyes it's practically useless apart from watching it writhe about uncontrollably off every jump.
Nah they are nice cause you can do Abit of everything with it
Bro I just love this guys energy itâs just so contagious â€
Such a cool rig! I've had my eye on a Ryft for a while but your previous vids did a great job of showing its weaknesses. The 2 speed transmission is a must it seems. I may bite the bullet and buy one and the 2 speed.
Are you really grumpy?! XD LOL
I bought the kit, built it, and a week later they dropped the price by 120$ i was kinda salty about that, but i love the 2 speed, and have been having a blast with it
@@Pifeinator HELLLOOO
It is indeed now an epic RC car! Kevin did an absolute great job with the Ryft. Axial? Nope, they blew it!
Hi Kev I'm not into R/C vehicles or monster trucks, but I think you are pure entertainment, well done and keep it coming
Omg on 6s that things gonna absolutely rip!!! I do want an Axial Ryft but itâs not at the top of my list yet. That thing sure looks like it can take a proper beating now! đđđđ
I built mine as soon as the Ryft kit came out, with all the Treal upgrades. Installed a Hobbywing XR8 Plus 2250kv motor & ESC combo and run it on 6S (2 x Gens Ace 3S 4300mah LiPo). I made almost the exact same modifications that Kev did to get the 1/8 scale motor to fit.
2nd gear on 6S is completely insane. Totally worth it :)
Hey Kevin. How much of a spacer did you have tu use to get the motor to clear the chassis and the one link? Did you have to rotate the motor at all or is it just a super tight fit. Having trouble with mine.
Very cool I really like that truck, fast when you want to bash but super controlled when you want to crawl
Cool rig . Now its ready for you to do almost anything . And thanks for finaly puting out another video on this channel. I been waitn for another 1 of yur videos , been a week. Tighten Up Kev
The ryft will always be one of my favorites. Everyone complained about them originally but I actually never broke a stock part.
I love it when he says âtumblewumbleâ itâs genius and very very funny đ
Nice video and thank you for inspiring me to make a hobby out of rc cars
Wow the RC axle rift did a Triple salchow!!!! I never seen a RC 4x4 do that before!
Really been interested in the Ryft for a while now. With all the upgrades available and this vid, that might have sealed the deal. Good to see you uploading Kev
I don't have one, but someone in my club does. I have had a vaterra twin hammers for ~5 years now, which is a very similar rig. In my opinion, horizon really screwed up with this truck, they were selling a much better RTR truck years ago with the twin hammers that didn't need this level of modification just to be runnable. That being said, the combo crawler/basher is seriously fun to drive. They definitely aren't the best at anything, you can easily get better performance with 2 separate trucks, but having 1 truck that does both reasonably well is tons of fun to take out hiking. I don't know if it's necessary to go quite as ham as kevin did, but the guy in my club only ran his on the stock motor once before upgrading to brushless. I don't remember what he is running, but he had the exact same problem with cogging and ditched the stock motor right away.
Keep in mind it would cost a lot
You made it come out of its shell! A bit sad it wasn't like this out of the box, but good job!đ
All around one of your best videos. A little bit more serious. Great work.
Nice vid now I gotta add this to the collection Thanks Kev!
11:02 seeing it wheely like that reminds me of those sandrail videos from the dunes in Dubai
Hey Kevin you should consider anodizing some of your rc car parts if you get a good finish it would look amazing
I love how he started doing some sponsorships as soon as he reached 1 Millon subs
You my friend are absolutely an inspiration truly epic content love your videos and words of wisdom because of you I am currently working on my dream come true as well thank you đđ»đđ»đŻ
It's amazing that it's overflowing with power!
dude love your vids keep it up just woundering were you get the parts from. eg. motor batterie packs and transmitters and recievers
Taking something and making it better is the whole point. Sorry Kevin, I got stuck reading the comments. In my RC world you must find the weak link and make it stronger and insanely overpowered đ! Your approach to the hobby is what I've been practicing with all my toys since the 1950's. Build it, bash it, build it better and enjoy life đ! Nothing like the smell of a smoked motor in the morning đ! SIMPLY EPIC!!!!!!!!!!!!!!!
Hi Kevin, I really like, that you can fit in one sentence "world best" and "I dont know what IÂŽm doing"
Keep doing this great stuff :-D
Iâve been waiting for this kev. Keep up the good work.
Even the worst RC car is still more better than no RC car.
Kev should make an RC version of the world's best monster truck
You created a complete new category of Car đȘđȘđȘ looks super fun đ
Kevs thinking: Have a electronic problem? Solution=more power!!!
Iâm new to this and really like the ryft cuz I feel like if itâs built like you did it itâs the best of both worlds with speed and crawling they have a sensored version for like 200 less than the regular if Iâm gonna replace everything it would be better to buy that one right? Or is the anything els different on it besides the sensored engin
Lol "it's much more controllable now" studder. Studder. Studder. Studder. Full blast.đ€Ł
Amazing car đđđđ
Ive been wanting to do a Crawler/basher build like this. So sick to see it
Looks like beast
I love how the upgrades are 3x the buggy cost. WORTH IT!!
Checks out, sounds like every car guy ever xD
A Holmes Hobbies puller pro xl would have been the perfect motor. Run one in my Yeti. Absolutely rips and smooth low speed
You can sponsor anything and make it sound epic, I swear to god
Take a shot every time kevin says "fit"
Kev what gearing were you running on the slate system?I can't get a good gear mesh.
Your videos are the best! Great work.
My favorite set up so far. Awesome
I have the same castle setup in my pirates 3 and love it. Amazing rig mate
Make it when and while ya can!
What brand of gear are you running in axles and dif and transmission that will hold up on a ryft
See this is the kind of crawler I would want something that can crawl and go fast when I want to but I definitely don't have the money to build something like that LOL good job Kev love the video
If you use the aux wire and program full drag brake in low gear. It will crawl heaps better. Low end resolution is goes up with more drag brake in the castle esc's
Treal stuff rocks ! Just did the 4 wheels steering conversion to my son uv a digger. Like your grave digger . Treal quality is awesome and there costumer service and postage is better than any one Iâve used.
Say when you replace the motor and the esc, what do you do with the setup yo took out
You really created a monster. Super impressive.
Been waiting for this video. I have the axleson the way, I'm going to use mamba x with 1415 motor. Glad it's solid.
I love the rc vids and the big mothers geting switched out keep it up
Insane.
Are you planning on rear steer?
If I copy your build and add rear steer, what radio would you recommend? Not worried about cost, just top of the line components.
living the top of life if you arenât worried about price
I so love to watch your videos you are so funny đlove it keep going thank you for the laughs
đ good grief that one is too much, I believe the 1/8 motor would be đđ»đđ»đđ»đđ»
Looks good! Got me thinking about a crawler đ€
Grate information kev...killing it
RC car is crazy too fast
Kev: MOOORRRREEE POOOWWWWEEERRRđ€Ł
What cameras do you use when you got first person on the rc and under it
How do yo get the shift fork not to bind up when installing the two speed transmission?
Just started watching the video, for some reason when I pressed the link I thought you were going to say something like, "buy an Armour" đ
Okay now you have my attention. Thus was by all means one for the books as far as I'm concerned. Good job!
That drag Slash looks epic
Holy crap yâall are making that monster truck so quick!!!
I just recently purchased the axe system. Found the same issue. Changed the throttle ramp setting in the esc. Issue fixed. Level 9 is instant POWER!
Cool. I shimmed up my Castle 2400KV using SCX24 spacers from an axle widening kit. The parts nobody uses because you replace them with brass. No cutting required.
This video was fun to watch, big respect for all the women seeing there man playing with car toysđđ
I'd like to cut the switch off mine as well but if I do that can you still calibrat the esc to the transmitter? Since it has the set button on it idk how to calibrate it without.
It really be nice to see him. Do videos on completely stalk vehicles without upgrading them. How are we supposed to know what to buy?
The amount of money it takes to make that care usable is so insane
Love your videos keep up the good work
11:46 it's like a cartoon character that is digging
The ryft is far from the worst rc. I love mine. I've never broken the first stock part but it does happen to have EVERY vitavon part offered now
Yeah Buddy!!! Thanks for showing us the way!!!
Literally amazing after the upgrades
I think this RC fully built would make for a very fun rc
the monster truck is coming along dude!
That has to be the most expensive rift build to date. Awesome Man! đ
Everything in Kevâa eye is worlds BEST
Kev just wondering did you manage to sort out the issues you had with the castle ESC that caught fire ? canât find anywhere where you said they sorted it out or was it something that you done that caused the fire just wondering mate looking to upgrade my arrma limitless. PS love the channel mateđ€đđđ
This video was awesome Kev buddy loved it
That under the chassis gopro angle was so cool! I definitely wanna see more of this beast! I wish they made a 1/5 scale version! You should push axial into doing that! Cant wait for that engine drop monster truck is looking so sweet already
Treal should make metal rims for those 2.6 mud tires you used in the other video