How to braze copper?
Vložit
- čas přidán 26. 08. 2024
- Join this channel to get access to perks:
/ @taddydigest
Wanna Learn more about hvac? Check out my hvac tips for technicians playlist.
• HVAC Tips for Technicians
Watch The Full Video (How to find a refrigerant leak?)
• How to find a refriger...
Nitrogen Flow Meter
amzn.to/3SscTl0
Nitrogen Regulator
amzn.to/3LHLUQg
Thermadyne TurboTorch
amzn.to/3Sx8spb
Uniweld KC100P Centurion Weld, Braze Outfit
amzn.to/3Sx8spb
Diversitech 800-002 Pro-2000 Leak Detector Spray
amzn.to/3C8Kkni
Join this channel to get access to perks:
/ @taddydigest
Wanna learn more about hvac? Check out my hvac tips for technicians playlist.
• HVAC Tips for Technicians
Taddy Digest Website
taddydigest.com/
Click this link to get your website consultation.
moderncontract...
Modern Web Studios has Built, hosted and maintained my Website.
modernwebstudi...
Fill out the contact form at modern web studios
modernwebstudi...
@Uniweldproducts @DiversiTechCorp
Dude idc what anyone else says, the amount of help you have given me is ridiculous. Not only that I can tell you are a good guy that loves what he does. When I was first getting started there was so much to learn and so many questions. You have simplified things for me and now I suggest anyone that starts in the HVAC field to come watch you. Keep doing your thing! Oh and my favorite video are the ones you do showing your day to day. Compressor changes, Diagnostics, and pretty much showing up and figuring out what’s wrong with the unit. And your thought process
This is the BEST Comment That I have had ever Thank YOU
@@im_slappey5446 ditto!!! This man is the real deal!
First time raising Excellent, I’ll give him a 10
14:41 - I'd call that a ten, given it's the first braze: much better than _my_ first joint!
He did pretty good for his 1st time, I give it a 10. Better than I was the 1st time. I live in kansas City. Brazing for me was a struggle at 1st, now that I have it figured out, it's second nature. Thank you for your content, a couple of your videos got me out of a jam.
Awesome Chad I'll let him know thank you so much for watching
Glad my videos got you out of a jam
Please share
Great job. 10 for all the detail in your videos.
Thank you very much!
Excellent video man- I have found that a #8 rosebud on the oxy/acy works just as good if not better than a turbo- they both are excellent tools though- sometimes you just dont want to lug a 2 cylinder kit under in the attic or on the roof (Phx-AZ). Love the channel man
Thanks for the info!
Get it to cherry red and apply brazing rod as per the Harris Brazing Guide. Heat the male portion first then the female portion drawing the brazing material into the cup. My first time brazing I was afraid to get the copper too hot (cherry) so I had a hard time getting good flow. After a few joints I went for the higher heat and was amazed how the rod flowed so nicely.
that weld is a 8 good job james.
good job james not bad for a rookie thats what they use to tell mee.
experience is very valuable u cannot pay for experience.
You couldn’t see psi on that flow meter because it doesn’t have it, it’s in CFH and SCFH because your flowing not pressurizing.
Nice! Why would sometimes you burn a hole through the copper? Leave the flame too long? Happen to me once.
Have the settings wrong or have it on the same spot for too long
I joined I primarily work on glycol chillers and bulk cooling tanks
Thanks for sharing your knowledge!
Glad it was helpful!
You’re not supposed to have the flame right on the center of the joint. You get a stronger joint if you have the flame on the fitting because it draws the filler up inside.
Absolutely thank you for your knowledge brother
@@TaddyDigest no problem. Just thought I might go over something you didn’t cover in the video.
Not his first time.he did great
Thanks Sheldon I will let him know
Taddy, just to get me started, I've done a lot of digging online and have had 2 or 3 hvac techs swear on the reliability of StayBrite 8. And, so i purchased myself a good Map gas turbo torch and stay brite + some silver-phospate rods for the regular brazing versus soft soldering with stay brite. Hvac techs I asked say that StayBrite 8 will handle vibration very well + you don't even need to float nitrogen because of the melting temp is so low and wont leave soot behind. What do you think, can I start myself doing basic residential HVAC this way and save like a thousand bux too in the process?
Great video btw man, straight to the point, basics and everything else.
Just to add. Propane torch for the stay-brite 8 and mapp turbo torch for brazing rods and leave the big heavy bottles and setups behind for welders lol
@@taketinnn33 as an installer, if you ever have to make a claim with the manufacturer, they won’t cover the install if you use stay brite.
I join
Should have done one with a leak..then how to resolve it
Use any flux ?
Yes, sometimes, when joining two different medals like copper and steel
Don’t forget your safety glasses 🤓
Thank YOU Safety First
I joined this channel
Thank YOU for subscribing
Click here to JOIN
czcams.com/channels/uMyjTVlkM4xZ5z_eSyoB1w.htmljoin
@@TaddyDigestthanks 🌸🌸🙏🏻I pray to God to win the random lottery the green card and come to the United States of America to see you
PSI?? It is SCFH.
I use 5-10
Awesome thank you Sheldon
Idol how to fixing eev422 erorr code samsung inverter thanks
Check out my Playlist hvac tips for technicians I have a video on it
I want to join
Join
czcams.com/channels/uMyjTVlkM4xZ5z_eSyoB1w.htmljoin
10
ok Deal
First time raising Excellent, I’ll give him a 10
I join