Omsi 2: How to remove the Speed Limiter of a bus *Tutorial*
Vložit
- čas přidán 30. 07. 2020
- Are you tired of speed limiters in Omsi 2 slowing you down? Making you run late? Well in this Omsi 2 tutorial I show you exactly how you can remove the speed limiter from most buses in Omsi 2, including all UK buses, most LHD buses and HK buses. Removing or changing the speed limiter of a bus in Omsi 2 is actually an extremely simple thing to do, that takes no more than a few seconds. Changing the speed limiter of the bus is the same for most buses and involves editing a bit of code in the engine const file, however in some buses the code may appear slightly differently, but the process is the same.
For the purpose of this tutorial I remove the speed limiter of the Enviro C400R and the Enviro 200MMC in Omsi 2, but the process is the same for most buses. One thing to note is that the speed a bus can achieve is linked to the points under Max Throttle in the const file. So some buses like the Enviro 200 MMC will actually reach a top speed of about 82.9km/h, thus if you are looking to change the top speed of a bus, you will have to follow the steps I used for the Enviro 200 MMC. However, bear in mind that when you are adding points to the Max Throttle, the values used for the Enviro 200MMC may not work with other buses.
I also apologies for the muffled sound heard in the background due to the speakers, it was my first time using the mic and as such it was not configured properly, that is why when I show you the buses with the speed limiter in game I have added the music to silence the audio, as it was not configured correctly, apologies. However if you look at the speedometer of the buses or in the top left corner, you will see the London Citybus 400 accelerate past 98km/h: the speed it was previously limited to. And you will also see the Enviro 200MMC accelerate past 80km/h the speed that it was previously limited to.
Note: I strongly suggest you create a back up of your engine const files, as if a gap or error is made in the code, it will break your bus!
If you would like to see a specific tutorial for Omsi 2 or any other game featured on this channel, don't hesitate to let me know in the comments section down below.
If you found this video helpful, leaving a 👍👍 helps 😃. For more Omsi 2 tutorials and content and more transport simulators, don't forget to hit that subscribe button at full speed (now that speed limiters are removed 😉): / @transportenthusiast
.......................................................................................................................................................................... - Hry
I had to search a lot until I found the help I needed, thank you
Yeah, no many tutorials on this topic. Glad it helped.
Nice video
Thanks
Lol did wonder how you did this lol good video tho
Haha, sure I also wondered how to do this myself and since there was no video on it, I thought this is definitely something all Omsi players should know lol.
@@TransportEnthusiast haha yes great idea! Now we going to see alot of nutters in videos tho that was ment to be your thing 😂
Oopps, lol. I can always artificially increase the speed limiter beyond the designated top speed haha, take out all realism 😂.
I need help to change the speed on the C400 because it only goes 63mph but very slow.
Under the engine const file should be speed gov/max speed etc. you can change it.
hi so i have this MAN A24 with a speed limiter that isn’t working for some reason? i have already adjusted the files like how u did it fyi
Means that it is scripted to reach a top speed then.
I could not find the limit of the (Citaro G C2), can someone help me please?
in the forum there are several methods but none of this bus.
Some scripts are very different
any idea of how to change the top speed in the add on london c400? 40mph is ok for london but not on gainsbourgh
Literally video shows how
@TransportEnthusiast actually done this and still bus was limited, however after looking through all the files, i did find where the speed limiter option was and its not anywhere near the engine or gearbox script, its a separate file, with literally just the speed limiter inside
Ah sorry, yeah forgot for the C400 it was in a different file my bad
Hi, just wondering, do you know how to make some vehicles, such as the Enviro400MMC (Voith) kickdown within the script? I’ve got it turned on but it doesn’t do anything.
Press the + button if driving with keyboard.
@@TransportEnthusiast I use the Logitech G920 wheel and pedals setup and I’m trying to find a way to get the kickdown working properly on the Voith 400MMC so I can use it for streams. I’ve used keyboard in the past to attempt it but I’ve had no such luck.
@welshbusenthusiast2210 it should just work when you floor the accelerator pedal
@@TransportEnthusiast Strange, it won’t kickdown whatsoever. I’ll look into that. Thank you.
@welshbusenthusiast2210 yeah does seem strange and annoying
Hai, do you want an editor? As I am beginning to learn how to edit, and wondering if I could help out with your channel? Please reply!
I am glad you want to help the channel and appreciate your support 😊. I already know how to use the Blender Editor reasonably well, so I am pretty much covered on that front, thanks for the offer mate. What editor do you use out of curiosity.
@@TransportEnthusiast Its a secret :P
Does the new electric buses by BYD use GPS to manage the speed limiters? How does the bus know what speed limit it is in?
I presume by using the speedometer
Yes but how does it know what speed limit the road is that it's travelling on to determine what the maximum speed is? Or am I referring to the speed governor.... Some of the new electric buses you see won't go above the road speed limit it is on, so if its in a 20mph zone then it won't go over that speed limit.... How does the bus know what speed limit it is in
Are we talking irl, probably gps to know speed limit
What's irl?
@@emygee1972 in real life
there are 2 files in the free bus given, constfile_GN92 and constfile_EN92 .. please help me? I was not successful?
yeah depends on the bus
@@TransportEnthusiast I tried to change the first value On both files
@@strongstrengthtv it won't work for some buses as for the default man buses their top speed is actually 78kmh so they do not have a speed limiter.
@@TransportEnthusiast i just hope that u test the code and sell me the files lol. it is editable. u need hours of testing. editing the engine is a must, i only editted the speed but not the engine.
@@strongstrengthtv In theory you can set the top speed to what ever you want, but 78kmh is the accurate one.
Do you know how to make a bus speed up faster? (for example the bus reaches 40 km quicker)
If yes, would you do a tutorial for this?
Think you have to edit the RPM values, however not sure as I haven't done myself. I can like into it and make a tutorial if I find out how to do it.
Ok
Do you maybe know what file is it?
Usually the gearbox file.
Any ideas now how to change it?
you know it worked when you go 80 mph and you fly across cottarell at 100 mph :D
Lol
do you know how to increase a rpm limiter? for example V3D's e200mmc, I want to make the limiter higher
You need to add extra rpms in the engine const file, rhought I showed that i the vid unless I have mistaken. Some of it is also down to gearbox scripts which Idk how to do
what is the map called?
Farthington Demo
Is it possible to remove the speed limiter from the Chicago artic?
Should be, depends how gearbox is scripted
@@TransportEnthusiast Seems like the top speed is a 100km/h. I've edited some files for my MAN Bremen A40 and 37 or the MAN Lion City rather and that particular bus isn't spawning anymore. Whenever I select it, the game pauses for a brief moment and then unpauses without the bus being there. All of the other buses are loading in.
Be careful what you change in the notepad files, if you accidentally remove a line it brakes the bus
@@TransportEnthusiast Mhmm, would you mind taking a look at the files to see if anything is wrong?
@@TransportEnthusiast I think I found where things went wrong. I inserted a comma instead of a period.
I've got the hang of it but the main problem is the HK Enviro 500MMC and HK Enviro 400.
Fhe scripting is different for them
@@TransportEnthusiast Yeah, I finally found how to change it now and works now lol just a bit of learning from you helped 😄.
More to the point. Can you make OMSI2 go from a stuttering ‘30’ to ‘60’ fps 😂
That would be magic
Did not work
What bus?
@@TransportEnthusiast enviro 200mmc
That needs extra scritping with gearbox
@@TransportEnthusiast ok like 6 speed?
Yeah, for example 6 speed.
For the state of Virginia I downloaded this information and I could not change any of the outlined selection shown in this video. Therefore I give it a THUMBS DOWN OR DISLIKE!
Talk about trolling